2. dynarex
  3. DynaRest Multi-Zone Foam Pressure Mattress

dynarex DynaRest Multi-Zone Foam Pressure Mattress Operating instructions

  • Hello! I've reviewed the instructions for the DynaRest Multi-Zone Foam Mattress. This document outlines the unpacking and decompression steps for your new mattress, including important warnings and guidelines. I'm ready to answer any questions you might have.
  • How should I remove the mattress from the outer plastic sleeve?
    How long should I wait before using the mattress?
    Where should I lay mattress after removing it from the inner bag?
R200819
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
SYMBOL GLOSSARY
For an explanation of symbols
used in Dynarex packaging, visit
dynarex.com/symbols.php
Reorder No. 10420
DynaRest™Multi-Zone
Foam Mattress
Manufactured for:
Dynarex Corporation
10 Glenshaw Street
Orangeburg, NY 10962
USA • www.dynarex.com
Made in Mexico
Remove the inner
compressed mattress
from the outer plastic
sleeve. Do not use sharp
objects when removing
the outer plastic sleeve.
Unroll the mattress.
Find the longer plastic
end of the inner bag.
Cut the inner bag open
at the longer end,
making sure not to cut
the mattress. Completely
remove the mattress
from the inner bag and
lay on a flat surface.
Decompression will
begin immediately. Do
not use for 60 min to
allow the mattress to
properly decompress.
It may take 48 hours to
fully decompress.
TEAR HERE
14
23
/