2. TouchIT
  3. DUO4PLED65

TouchIT DUO4PLED65, DUO4PLED46 User guide

  • Hello! I've reviewed the user guide for the TouchIT LED Duo touch screen. This document includes instructions for installing the stand, which is included with the 32" model and optional for other sizes. The guide also covers wall mounting options. I'm here to answer any questions you have about the device and its installation.
  • Is the stand included for all sizes of TouchIT LED Duo?
    What is the first step when installing the stand?
    Should I use any wall mount kit?
Installation
This stand is included for 32” and is optional for all other sizes.
1.!Find the appropriate stand, take out the packaging and use the bolts
included to install the back plate first.
!
Section 5
INSTALLING THE STAND
The stand is included with the 32” TouchIT
LED Duo, but a table top stand is available for
all other sizes up to 82”
Installing the Stand
14
2. Assemble the stand and supporting upgright. Align the sliding
groove, and slide in the stand then tighten the securing bolts.
!
3. Stand the monitor upright, and place it to desirous position.
!
15
Wall Mount Kits
Due to the difference in weight of each model, please use only the
wall mount kit that is designed for each model. If you are unsure,
please check with your reseller.
32”
42”
46”
16
55”
65”
70”
17
/