Atleisure FRN-801650 User manual

Brand: Atleisure

Model: FRN-801650

Type: User manual

Plaza Table Set

Assembly & Care Instructions

IMPORTANT, RETAIN FOR FUTURE REFERENCE:

READ CAREFULLY

Item: HUC31738 - AM, HUC23655-AM, HUC23642 - AM

Model: FRN-801650

ATLeisure, LLC

US Toll Free: 1-855-880-7205 (English)

8am - 5pm, Monday through Friday, Eastern Time

Email: customerser[email protected]

or visit our website at www.atleisure.com

Please Contact ATLeisure Customer Service

Prior to Returning to Store

For assistance with use, parts,

or customer service please contact:

For outdoor residential household use only.

Not for commercial use.

Designed in USA

Made in Vietnam

C105972

Woodfromwell-

managedforests

100%

Contents

HUC31738 - AM

Table Assembly

Part Description Quantity Re-Order Number

ATable Top 1

B Legs 4

Part Description Quantity Re-Order Number

1 Washers 8

2 Lock Nuts 8

3 Wrench 1

KIT Hardware Kit (Re-order only) 1 FRN-801650-HUC31738-KIT

Contents

Table Assembly

Hardware Contents

Package Contents

Assembly

Bench Assembly

Hardware Contents

Package Contents

Assembly

Chair Assembly

Hardware Contents

Package Contents

Assembly

Wood Maintenance

Furniture Care and Maintenance

Warnings and Cautions

Warranty

2-3

4-5

5-7

6-7

CAUTION: Do not use sharp tools to remove the protective material, as it may

damage the product. Please lay out all package contents to make sure all pieces are

present.

Hardware Contents:

Package Contents:

N/A

HUC31738 - AM

Table Assembly

Step 1:

Step 2:

Place all parts on level, clean, soft surface.

Bench Assembly

Assembly

Part Description Quantity Re-Order Number

ATable Top 1

B Legs 4

BENCUSH Bench Seat Cushion 1 FRN-801650-HUC23655-BENCUSH

Part Description Quantity Re-Order Number

1 Washers 8

2 Lock Nuts 8

3 Wrench 1

KIT Hardware Kit (Re-order only) 1 FRN-801650-HUC23655-KIT

CAUTION: Do not use sharp tools to remove the protective material, as it may

damage the product. Please lay out all package contents to make sure all pieces are

present.

Step 1:

Hardware Contents:

Package Contents:

B BENCUSH

Place all parts on level, clean, soft surface.

lt & Nut

HUC23655-AM

N/A

Part Description Quantity Re-Order Number

1 Bolt M6 x 75 mm & Nuts 2

2 Bolt M6 x 60 mm & Nuts 4

3 Bolt M6 x 35 mm & Caps 2

4 Bolt M6 x 40 mm 2

5 Screw M6 x 45 mm 2

6 Allen Key 4 2

KIT Hardware Kit (Re-order

only)

1 FRN-801650-HUC23642-KIT

Bench Assembly

Chair Assembly

CAUTION: Do not use sharp tools to remove the protective material, as it may

damage the product. Please lay out all package contents to make sure all pieces are

present.

Step 2:

NUTS

CAPS

NUTS

Hardware Contents:

HUC23655-AM

HUC23642 - AM

N/A

Chair Assembly

Assembly

Part Description Quantity Re-Order Number

ABack 1 FRN-801650-HUC23642-A

B Legs 2 FRN-801650-HUC23642-B

C Base 1 FRN-801650-HUC23642-C

D Brace Rail 1 FRN-801650-HUC23642-D

SCUSH Seat Cushion 1 FRN-801650-HUC23642-SCUSH

Package Contents:

B C D

Step 1:

Place all parts on level, clean, soft surface.

HUC23642 - AM

SCUSH

Chair Assembly

Step 2:

HUC23642 - AM

Wood Maintenance (Eucalyptus)

EUCALYPTUS CARE AND MAINTENANCE

READ CAREFULLY: SURFACE PREPARATION.

•STEP 1. After the product is assembled and before oil treatment, thoroughly

wipe clean your furniture underneath and on top, remove all dirt and sawdust parti-

cles from all mortise joints and grooves using a brush and rag.

•STEP 2. OILING: We recommend the furniture to be completely covered and

sealed underneath and on top with a light coat of hardwood timber oil preservative,

making sure the oil penetrates into all grooves and mortise joints.

•STEP 3. IMPORTANT. After oiling wipe off excess oil, then allow the oil to dry in

the shade away from direct sunlight. Wipe off again with a clean rag removing any

excess oil that may not have penetrated into the timber. Repeat wiping off excess

oil if necessary.

•STEP 4. REPEAT THE ABOVE PROCEDURE IN 48HRS. Sanding is not required

between these initial coats. Your furniture is now protected however repeat appli-

cations of the hardwood timber oil may be required. Before re- oiling check your

furniture for any residue build up, if this occurs a light sanding may be required.

Note: The frequency of oiling will vary according to the climatic conditions in your

area and direct exposure to the elements your furniture is subjected to.

NOTE: If Eucalyptus furniture is neglected with prolonged unprotected exposure to

the elements this will cause the timber to discolor to a silvery grey, checking and

hairline cracks may appear if in the event your setting does discolor to restore the

timber, sanding and oiling will be required. We recommend the furniture be stored

with undercover protection during wintertime and wet season.

NOTE: WET TIMBER MUST BE DRIED FOR 3-5 DAYS BEFORE OILING. DO NOT

OIL THE FURNITURE LATE IN THE DAY WHEN DEW OR CONDENSATION IS LIKE-

LY TO FORM OR WHEN RAIN IS THREATENING. NOTE: ALL TIMBER FURNITURE

GOES THROUGH A SETTLING IN PERIOD, FASTENERS MUST BE TIGHTENED

REGULARLY. DO NOT LEAVE FASTENERS UNTIGHTENED THIS COULD CAUSE

FURNITURE DAMAGE.

Eucalyptus timber is kiln dried under strict guidelines. Upon purchasing your

furniture small hairline cracks may appear, this is part of the drying process of this

particular timber species, these cracks will not deter the durability of the furniture,

up to 3% shrinkage may occur in this species of timber.

WARNING: Staining on Tuscan or light colored pavers may occur from

sap leaching and dust particles if the timber is not cleaned properly and

weathered correctly, hose down your furniture and clean thoroughly

before placing your furniture on light colored pavers.

The key to longevity of your new furniture is maintenance, regular cleaning and

factors such as location furniture is situated, sun, salt, dust, moisture & pollution.

All of these factors can wear down the look of your furniture. Please follow

instruction below which can extend the look and period of use for your furniture.

During winter or raining season storage, store in the cool well-ventilated area,

to help prevent excessive shrinkage or expansion of timber depending on the

amount of humidity. When making repairs ensure the area is prepared properly.

Clean the damaged area from all dirt & dust. Shake paint container and then ap-

ply with required brush. Depending on the size of damaged area, wait 6-12 hours

before using furniture. To reduce maintenance, a furniture cover is recommended.

CLEANING

•To clean painted furniture frame, simple wash it with soapy water using a soft

cloth or a soft non-metallic brush. Then rinse off the furniture and dry with soft

clean cloth.

• Timetable will depend on location but rule of thumb is once a month for

external area and two to three times a year for fully protected furniture.

CUSHION CARE

•Please keep cushions dry, vacuum regularly, and avoid leaving in direct sun-

light for long periods of time.

•Spot clean the affected area using mild soapy and water with a soft cloth

sponge. Once clean rinse with clean water and pat dry with a soft cloth. Ensure

lling has dried out before use.

•Do not use solvents; do not dry clean or machine wash. For stubborn stains

commercial fabric cleaners are available.

•Please review application instructions on product before using on your cushions.

• You may use a steam cleaner applicator but ensure cushion cover remain on

insert and to use gentle setting on appliance.

Furniture Care and Maintenance

Warnings and Cautions

DANGER: Keep children out of

unpacking area.

CAUTION: Use furniture on ﬂat

surface only.

CAUTION: DO NOT place hot objects directly on the

wood surface to prevent damage to the wood.

CAUTION: DO NOT use pressure

cleaning machines when cleaning

your furniture or you will damage the

structure of the wood.

WARNING: Do not stand on chair, table, or

bench. Do not stand on table or chair.

Warranty

LIMITED WARRANTY

The warranties in this document give speciﬁc rights to the purchaser. These rights

are in addition to those implied by law. Nothing in this warranty document is intended

to exclude, modify or restrict rights which the purchaser may have under the Com-

petition and Consumer Act 2010 or any other legislation which may not be excluded,

modiﬁed or restricted by an agreement.

WARRANTY CONDITIONS

WARRANTY TERM: ONE (1) YEAR-TIMBER, FABRIC AND FOAM

1. Satisfactory proof of the purchase date must be furnished at the time of notiﬁcation

of the defect for a claim under this warranty to be enforceable. For Warranties to be

honored, a copy of purchase receipt must be shown upon request. In various cases

ATLeisure may require product inspection, on-site inspection and or photographic

evidence Photographic evidence and purchase receipt copies must be emailed to

customerser[email protected] before any replacement or refund can considered for

approval.

2. This warranty covers all parts found to be defective in workmanship and/or materials

during the warranty period and will be repaired or replaced at the discretion of the

manufacturer at no cost to the purchaser.

3.This warranty will be void and accordingly no claim of any nature will be enforceable

if the product has not been assembled, installed or operated according to the instruc-

tions, or has been subject to abuse, improperly treated, neglected, misused and/or if

any repairs, maintenance or service has been done by an unauthorized person.

4. This warranty does not cover Natural timber characteristics such as timber knots,

hairline grain checking, shrinkage and defects caused by mishandling and misuse of

the products, fastening defects caused by the failure to maintain the product in ac-

cordance with the care and maintenance instructions and defects caused by transpor-

tation cartage. Failure to comply with these instructions will render the warranty null

and void.

5. Transportation for replacement product will rests solely at the discretion of ATLei-

sure.

6. This warranty does not cover commercial use.

7. Our goods come with guarantees that cannot be excluded under the Australian Con-

sumer Law. You are entitled to a replacement or refund for a major failure and com-

pensation for any other reasonably foreseeable loss or damage. You are also entitled

to have the goods repaired or replaced if the goods fail to be of acceptable quality and

the failure does not amount to a major failure.

Atleisure, LLC

Customer Service Dept.

1040 Boulevard SE, Ste. B

Atlanta, GA 30312 USA

ATLeisure, LLC

1040 Boulevard SE, Suite B

Atlanta, Georgia 30312, USA

US Customer Service Toll Free 1-855-880-7205

8am - 5pm Eastern Time, Monday through Friday

www.atleisure.com

Atleisure FRN-801650 User manual

Brand: Atleisure

Model: FRN-801650

Type: User manual

Download PDF

report

Atleisure FRN-801650 User manual

Atleisure FRN-801650 User manual

Related papers

Other documents