Home Styles 5180-15 Operating instructions

Brand: Home Styles

Model: 5180-15

Type: Operating instructions

PART LIST

HARDWARE LIST

Top

1 pc.

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Side Frame

1 pc.

Side Frame

1 pc.

Front Frame

1 pc.

Front Frame

1 pc.

Stretcher

1 pc.

Keyboard

1 pc.

Keyboard

1 pc.

88 5180 15

Executive Desk

Drawer

2 pcs.

Home Styles Consumer Assistance: www.homestyles-furniture.com,

[email protected], 888-680-7460, 877-831-0319

Cam Lock

8 pcs.(+4 extra)

Cam Lock Screw

8 pcs.(+1 extra)

Pull Handle

4 pcs.

M4x38

Machine Screw

4 pcs.

M3x25

Wood Screw

for Drawer Side

16 pcs.(+1 extra)

M3x32

Wood Screw

6 pcs.(+1 extra)

M3x16

Wood Screw

for Drawer Bottom

8 pcs.(+1 extra)

M3x10

Wood Screw

for Hinge

6 pcs.(+1 extra)

M6x32

Head Cap Bolt

21 pcs.(+1 extra)

Tools required for assembly : Phillips screwdriver, Level

(Please refer to the last page(s) of these

instructions for drawer assembly steps.)

Front Rail

1 pc.

Back Panel

1 pc.

Divider

1 pc.

Divider

1 pc.

Hex Wrench

1 pc.

Small

Hex Wrench

1 pc.

Spring Washer

21 pcs.(+1 extra)

Flat Washer

21 pcs.(+1 extra)

STEP 1

STEP 2

STEP 3

Attach Dividers (H), (I) to unit with Cam Locks.

(See Figure 1)

Attach Back Panel (G) to unit with Cam Locks.

IMPORTANT

* Do not tighten up all the screws until each part is properly assembled.

* You should keep Key Wrench in a safe place as you may need to tighten up the Bolts in the future.

* Use a soft cloth between these parts and the floor.

* After assembly, item must be level to work properly. Use the included adjustable levelers to level.

Attach Front Frames

(D), (E) to Front Rail (F)

with Wood Screws.

Assembly Instructions 2/5

Insert Cam Lock Screws

into the pre-drilled holes

of Back Panel (G) and

Front Frames (D), (E).

Cam Lock Screw

Wood Screw

Figure 1

Assembly Instructions 3/5

STEP 4

STEP 5

Place Top (A) upside down on soft cloth.

Attach Top (A) to unit with Head Cap Bolts, Spring Washers and Flat Washers.

Figure 2

Figure 3

Flat Washer

Spring Washer

Head Cap Bolt

Wood Screw

Attach Side Frame (C) to unit with Head Cap Bolts,

Spring Washers and Flat Washers. (See Figure 2)

Attach Stretcher (J) to unit with Wood Screw. (See Figure 3)

Attach Side Frame (B) to unit with Head Cap Bolts,

Spring Washers, Flat Washers and Wood Screw.

Assembly Instructions 4/5

STEP 7

STEP 6

Turn unit to its’ upright position.

Slide Keyboard and Drawers (M) into place.

To level the unit, adjust the adjustable levelers on the bottom of legs.

(See Figure 6)

Note: Unit must be level to work properly.

Attach Keyboard (L) to Keyboard (K)

with Wood Screws (for Hinge).

Attach Pull Handles to Keyboard

with Machine Screws. (See Figure 4)

Wood Screw (for Hinge)

Figure 4

Figure 6

Assembly Instructions 5/5

Figure 1

Figure 2

MAKE SURE ROLLER

IS ON THE BACK

Drawer (M)

Part List

M1.

Drawer Front

2 pcs.

M5.

Drawer Bottom

2 pcs.

M2.

Drawer Back

2 pcs.

M3.

Drawer Side

2 pcs.

M4.

Drawer Side

2 pcs.

Figure 3

Figure 4

Insert wood screws (4X)short

into the pre-drilled holes in M5,

tighten screws. (See Figure 3)

Attach Pull Handle with

machine screw.

(See Figure 4)

Slide M5 into the grooves in M3

and M4. Be sure to push M5 all

the way forward so it meets M1.

(See Figure 2)

STEP 1

STEP 2

STEP 3

STEP 4

Tighten all screws used in

drawer assembly.

Attach M1 to M3 and M4, using

wood screws (4X),long

tighten halfway.

Attach M2 to M3 and M4 using

wood screws (4X),long

tighten halfway. (See Figure 1)

Home Styles 5180-15 Operating instructions

Home Styles 5180-15 Operating instructions

Home Styles 5180-15 Operating instructions

Related papers

Other documents