Contec SPT-100A-22TP01 Reference guide

Brand: Contec

Model: SPT-100A-22TP01

Type: Reference guide

Reference Manual

CONTENTS

STAND-PC 21.5-inch model, 4GB memory integrated type

SPT-100A-22TP01

STAND-PC 21.5-inch model, 8GB memory integrated type

SPT-100A-22TP02

Introduction .................................................................. 5

Safety Precautions .................................................... 11

Product Nomenclature and Function................ 18

Hardware Setup......................................................... 31

BIOS Setup .................................................................. 42

Appendix ...................................................................... 71

Customer Support and Inquiry ........................... 93

Table of Contents

Introduction ............................................................................ 5

1. Related Manuals ...................................................................................................................................... 6

2. About the Product ................................................................................................................................... 7

3. Features ..................................................................................................................................................... 8

4. Supported OS ........................................................................................................................................... 9

5. Product Configuration List ................................................................................................................... 10

Safety Precautions .............................................................. 11

1. Safety Information ................................................................................................................................. 12

2. Handling Precautions............................................................................................................................ 13

1. FCC PART 15 Class A Notice .......................................................................................................... 15

2. EN55032 Class A Notice ................................................................................................................. 15

3. Battery handling and the storage in EU signatory ......................................................................... 16

4. Security Warning.................................................................................................................................... 17

1. Information security risks ............................................................................................................... 17

2. Security measures – e.g. ................................................................................................................. 17

Product Nomenclature and Function ............................. 18

1. Nomenclature of Product Components ............................................................................................ 19

2. Description of Product Components ................................................................................................. 22

1. LED: POWER, ACCESS, STATUS ...................................................................................................... 22

2. DC power connector: DC-IN (Display section) .......................................................................... 22

3. USB: USB for the touch screen (Display section) ....................................................................... 23

4. DVI Interface: DVI-D (Display section) ......................................................................................... 24

5. Analog RGB connector: VGA (Display section) .......................................................................... 25

6. DC power input connector: DC-IN ............................................................................................... 25

7. Power switch: POWER-SW ............................................................................................................. 25

8. Mic input interface: MIC ................................................................................................................. 26

9. Line output interface: LINE OUT ................................................................................................... 26

10. DVI interface: DVI-I .......................................................................................................................... 26

11. USB3.0 port: USB3.0 ........................................................................................................................ 27

12. USB2.0 port: USB2.0 ........................................................................................................................ 27

13. Giga bit-Ethernet: LAN A, B ........................................................................................................... 28

14. CFast card connector: CFast 1, 2 ................................................................................................... 29

15. Serial Port Interface: SERIAL A, B .................................................................................................. 30

Hardware Setup ................................................................... 31

1. Before Using the Product for the First Time .................................................................................... 32

2. Hardware Setup ..................................................................................................................................... 33

1. How to remove the display............................................................................................................ 33

2. How to set the display .................................................................................................................... 34

3. Install the display vertically ............................................................................................................ 35

Table of Contents

4. Display setting menu ...................................................................................................................... 37

5. Calibration setting ........................................................................................................................... 39

6. Installation Requirements .............................................................................................................. 41

BIOS Setup ............................................................................ 42

1. Introduction ............................................................................................................................................ 43

1. Starting Setup ................................................................................................................................... 43

2. Using Setup ....................................................................................................................................... 44

3. Getting Help...................................................................................................................................... 44

4. In Case of Problems......................................................................................................................... 44

5. A Final Note About Setup .............................................................................................................. 44

2. Main Menu .............................................................................................................................................. 45

1. Setup Items ....................................................................................................................................... 45

3. Main.......................................................................................................................................................... 46

4. Advanced................................................................................................................................................. 47

1. ACPI Settings .................................................................................................................................... 48

2. Super IO Configuration................................................................................................................... 49

3. H/W Monitor..................................................................................................................................... 51

4. CPU Configuration ........................................................................................................................... 52

5. PPM Configuration .......................................................................................................................... 53

6. SATA Configuration ......................................................................................................................... 54

7. CSM Configuration .......................................................................................................................... 55

5. Chipset ..................................................................................................................................................... 56

1. North Bridge ..................................................................................................................................... 57

2. Intel IGD Configuration .................................................................................................................. 58

3. LCD Control ....................................................................................................................................... 59

4. South Bridge ..................................................................................................................................... 60

5. Azalia HD Audio Configuration..................................................................................................... 61

6. USB Configuration ........................................................................................................................... 62

7. LAN Configuration........................................................................................................................... 63

6. Security .................................................................................................................................................... 64

1. Secure Boot menu ........................................................................................................................... 66

7. Boot Configuration................................................................................................................................ 67

8. Save & Exit .............................................................................................................................................. 69

Appendix ............................................................................... 71

1. System Reference................................................................................................................................... 72

1. Specifications .................................................................................................................................... 72

2. Physical Dimensions .............................................................................................................................. 75

1. Display horizontal installation ....................................................................................................... 75

2. Display vertical installation ............................................................................................................ 75

3. POST Codes ............................................................................................................................................ 77

4. SERIAL I/O Address and Register Function ...................................................................................... 80

5. Watch-Dog-Timer .................................................................................................................................. 85

6. Battery Disposal ..................................................................................................................................... 90

1. Battery Specification ....................................................................................................................... 90

Table of Contents

2. Dispose of the Battery .................................................................................................................... 90

7. Life of CFast............................................................................................................................................. 92

Customer Support and Inquiry ........................................ 93

1. Services .................................................................................................................................................... 94

Introduction

This section provides necessary information of the product

such as the outline, bundled items and manuals before

actual use.

—

Introduction

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

1. Related Manuals

The manuals related to the product are listed below.

Read them as necessary along with this document.

 Must Read the Followings.

Name

Purpose

Contents

How to get

Product Guide

Must read this after opening the

package.

This lists the product configuration

and describes the precautions.

Included in the package

(Printed matter)

Reference Manual

Read this when operating the

product.

This describes the hardware aspects

such as functions and settings.

Download from

the

CONTEC

website (PDF)

 Download Manuals

Download the manuals accordingly from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

2. About the Product

This product is an “All-in-One” PC with an integrated high-performance touch screen.

21.5-inch size of the display monitor is pre-installed, and more than 10 ports of rich, extendable

interfaces such as DVI-I, 1000BASE-T, USB 3.0, serial and Audio are provided.

Embedded-type chipset and CPU have been adopted. The use of readily available parts ensures the

ease of the use of the product.

—

Introduction

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

3. Features

 Shipped to your door already assembled as an “All-in-

One” PC.

The product is shipped from the factory with the display monitor, stand, PC unit pre-assembled. Just connect the cable to the PC and

turn on the power to get started.

 Rich, extendable interfaces with more than 10 ports.

With rich and extendable interfaces that include 1000BASE-T×2, USB3.0×1, USB2.0×5, serial (RS-232C) ×2, and general I/O port ×1,

this is the best PC for use in industrial applications where peripheral device extension capability is a must.

 High-performance touch screen display.

The high-performance industrial touch screen display is of a type also used for medical equipment. It features touch operations similar

to that of tablets or smartphones with 10-point multi-touch capabilities. It also provides superior visibility thanks to a viewing angle of

178°(Horizontal) / 178°(Vertical).

 The front side of the display meets the IP54 standard,

and the fan-less PC design ensures dust-free

specification.

The front side of the display is designed to be dust and drip free to meet the IP 54 standard. The PC unit contains no fan, which ensures

free from dust or foreign substance.

 A low center gravity structure achieved by mounting

the PC in the pedestal.

Mounting the PC unit in the pedestal of the display stand achieves a low center gravity structure and makes the product stable.

The pedestal part can also be set with screws.

 Long-term product availability contributes to low-cost

operation.

In addition to the industrial display monitor, taking up CPU configurations can contribute to longer-term product availability.

This frees the users from operation checks or device structure changes each time PC models changes, and it also reduces the running

costs of development or verification.

 Pre-installation of OS to support the latest integrated

type

Windows 10 IoT Enterprise LTSB 2016 64-bit edition is installed to support Japanese, English, Chinese, and Korean.

Unlike Windows10 commonly used, long-term availability with the same specifications are guaranteed. Moreover, Write Filter, one of

the additional functions, enables the system to operate with Read-only.

—

Introduction

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

4. Supported OS

 Windows 10 IoT Enterprise LTSB 2016 64-bit (Japanese / English / Chinese / Korean)

—

Introduction

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

5. Product Configuration List

The product consists of the items listed below.

Check, with the following list, that your package is complete.

If you discover damaged or missing items, contact your retailer.

Product…1

AC Adapter for PC...1

AC Power Cable for PC...1

DVI Cable for Display ...1 *1

DVI-Analog RGB

Conversion Adapter...1

Stand Wiring Cover...1

AC Adapter for Display...1

AC Power Cable for

Display...1

USB Cable for Touch

Screen...1*1

Cable Tie...2

Serial Number Label...1

USB removal prevention

fitting (angle)…6

Washer assembled screw

(M3 x 6)...6

Washer assembled screw

(M3 x 8, black)...4

Washer assembled and

cross

recessed hexagonal

bolt (M4 x 10, black)...4

Setup Procedure

Document…1

IPC Precaution List...1

Warranty Certificate...1

End User License

Agreement (EULA)...1

Setup Procedure

Document…1

CFast User’s Guide...1

Recovery Media...1

*1 Preset upon shipping.

Safety Precautions

Understand the following definitions and precautions to

use the product safely.

Never fail to read them before using the product.

—

Safety Precautions

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

1. Safety Information

This document provides safety information using the following symbols to prevent accidents

resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

DANGER indicates an imminently hazardous situation which, i

f not

avoided, will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury or in property

damage.

—

Safety Precautions

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

2. Handling Precautions

WARNING

 Always check that the power supply is turned off before connecting or disconnecting power

cable.

 Do not modify the product.

 This product is not intended for use in aerospace, space, nuclear power, medical equipment,

or other applications that require a very high level of reliability. Do not use the product in

such applications.

 If using this product in applications where safety is critical such as in railways, automotive, or

disaster prevention or security systems, please contact your retailer.

 Do not attempt to replace the battery as inappropriate battery replacement poses a risk of

explosion. For battery replacement, contact your retailer as it must be performed as a process

of repai r.

 When disposing of a used battery, follow the disposal procedures stipulated under the

relevant laws and municipal ordinances. For details on replacing the battery, refer to the

appendix.

CAUTION

 Do not use or store this product in a location exposed to high or low temperature that

exceeds range of specification or susceptible to rapid temperature changes.

e.g. - Exposure to direct sun - In the vicinity of a heat source

 Do not use this product in extremely humid or dusty locations. It is extremely dangerous to

use this product with its interior penetrated by water or any other fluid or conductive dust. If

this product must be used in such an environment, install it on a dust-proof control panel, for

example.

 Avoid using or storing the product in locations subject to shock or vibration that exceeds

range of specification.

 Do not use this product in the vicinity of devices that generate strong magnetic force or

noise. Such products will cause this product to malfunction.

 Do not use or store this product in the presence of chemicals.

 To clean this product, wipe it gently with a soft cloth dampened with either water or mild

detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent

pealing or discoloration of the paint.

 This product’s case may become hot. To avoid being burned, do not touch that section while

this product is in operation or immediately after turning off the power. Avoid installation in a

location where people may come into contact with that section.

 CONTEC does not provide any guarantee for the integrity of data on storage.

—

Safety Precautions

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

 Always disconnect the power cable from the receptacle before mounting or removing the

expansion board, before connecting or disconnecting any connector.

 To prevent corruption of files, always shutdown the OS before turning off this product.

 CONTEC reserves the right to refuse to service a product modified by the user.

 In the event of failure or abnormality (foul smells or excessive heat generation), unplug the

power cord immediately and contact your retailer.

 To connect with peripherals, use a grounded, shielded cable.

 Do not use any sharp-pointed object such as a mechanical pencil to touch the touch panel.

Doing so may scratch the touch panel, resulting in malfunctions.

 When the surface or frame of the touch screen has become dirty, wipe it with neutral

detergent. Do not wipe the touch screen with thinner, alcohol, ammonia, or a strong

chlorinated solvent.

 Use your fingers to perform operations on the touch screen. Operations with the stylus pen

on the screen might not perform well due to the pen you are using with.

 LCD may have a few bright spots that are always on or a few black spots that are always off.

Color irregularity may also occur depending on the viewing angle. This however is due to the

structural characteristics of the LCD; therefore, it is not a product fault.

 Be certain to use the bundled AC adapters and power cables. Also, do not use these AC

adapters or power cables with any other devices.

 Burn-in on TFT Display

“Burn-in” may occur if the same display is retained for a long time. Avoid this by periodically

switching the display so that the same display is not maintained for a long time.

* Burn-In: Phenomenon characterized by a TFT display as a result of long-time display of the

same screen where a shadow-like trace persists because electric charge remains in the LCD

element even after the patterns are changed.

 The backlight lifetime of the touch screen display.

The rated life of the backlight is 30,000 hours or longer.

*Ambient temperature25°C±5°C, I F =110mA, Drops to 50% of the initial luminance.

—

Safety Precautions

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

1. FCC PART 15 Class A Notice

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

2. EN55032 Class A Notice

Warning:

Operation of this equipment in a residential environment could cause radio interference.

—

Safety Precautions

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

3. Battery handling and the storage in

EU signatory

This symbol mark is for EU countries only.

This symbol mark is according to the directive 2006/66/EC Article 20 Information for end-users and

Annex II.

This symbol mark means that batteries and/or accumulators, at their end-of-life, should be disposed

separately from the household waste.

If a chemical symbol is printed beneath the symbol mark shown above, it indicates that the battery

or accumulator contains a heavy metal at a certain concentration.

The concentration standard is indicated below:

Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%)

These ingredients may cause hazardous conditions for human and the global

Refer to the

Appendix for the specification as well as how to remove and dispose of the battery.

—

Safety Precautions

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

4. Security Warning

When connecting to the network, be aware of security-related problems. See the examples of

Security measures below and set up the product properly along with the network devices.

1. Information security risks

 Unauthorized access from the outside through a network could cause the system halt, data

damage, or exposure to malware. *1

 Invaded and used as a stepping stone, a device might attack the others through networks. (a

victim becomes an assailant)

 Information might leak without realizing due to the connection to the network.

 Secondary damages such as harmful rumors, liability in damages, social credibility fall, and

opportunity loss are expected led by the troubles described above.

*1: Malware (Malicious Software) is software that brings harm to a computer system and performs

unintended operations.

2. Security measures – e.g.

 Do not keep using the default password. (Refer to the product manual for the password

setting).

 Set a strong password.

Combined with upper and lowercase letters, and numbers so that it cannot be easily

analogized by others.

 Change the password periodically.

 Disable unnecessary network services and functions.

 Restrict access to the network with network devices. *2

 Restrict ports to be released on the network with network devices. *2

 Create a closed network connection using such as dedicated network or VPN*3

*2: Inquire for setting procedure to manufacturers.

*3: VPN (Virtual Private Network) a secured network that wards off unauthorized access by

protecting the communication path with authentication and encryption.

Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole

that are endlessly found day and night.

Please understand that risks are always involved with the Internet connection, and we strongly

recommend a user should constantly update information security measures.

Product Nomenclature

and Function

This section describes product component names and their

functions, pin assignment of each connector.

—

Product Nomenclature and Function

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

1. Nomenclature of Product Components

Component names of the product are shown in the figure below.

 Product front view

 Display section rear view

 Display section bottom view

Touch screen display

Display section

PC section

Menu screen button

↑ button

↓ button

Sslect button

Display power button

—

Product Nomenclature and Function

—

SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)

 PC section connector view

 PC section side view

Name

Function

Display section back

POWER LED

Power ON display LED

DC-IN

DC power input connector

USB

USB for the touch screen TYPE-B connector x 1

DVI-D

Display port (24-pin Female)

VGA

Display port (15-pin HD-SUB Female)

PC section connector

POWER LED

PC power ON display LED

STATUS LED

Status LED

ACCESS LED

CFast disk access display LED

DC-IN

DC power input connector

POWER-SW

Power switch

MIC IN

Mic input (3.5φ PHONE JACK)

LINE OUT

Line out (3.5φ PHONE JACK)

DVI-I

Display (29-pin Female)

USB2.0

USB3.0

POWER-LED

DC-IN

MIC IN

POWER SW

LINE OUT

ast1 CFast2

DVI-I

AN A

AN B

SERIAL A

TUS LED

CESS LED

USB2.0

SERIAL B

POWER-SW

Page is loading ...

Contec SPT-100A-22TP01 Reference guide

Contec SPT-100A-22TP01 Reference guide

Contec SPT-100A-22TP01 Reference guide

Related papers

Other documents