SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
1
When using electrical appliances, basic safety precautions should always be taken
including the following:
• This product is for household use only; do not use outdoors.
• Always use on a dry, level surface.
•
WARNING: DO NOT operate in the presence of explosive and/or ammable fumes.
• Avoid contact with moving parts.
• Operate fan only when fully assembled with all parts properly in place.
• Only use attachments provided by the manufacturer for this product.
• Close supervision is necessary when any fan is used by or near children.
• Unplug from outlet when not in use, when moving fan from one location to another,
before servicing and before cleaning.
• To disconnect, grip plug and pull from wall outlet; never pull on cord.
•
WARNING: DO NOT operate the fan with a damaged cord or plug, or after the fan
malfunctions, has been dropped or damaged in any manner.
• To protect against electrical shock, DO NOT immerse unit, plug or cord in water or spray
with liquids and plug the appliance directly into a 120V AC electrical outlet.
•
WARNING: To avoid re hazard, NEVER place the cord under rugs or any parts near
open ame, cooking or other heating appliance. DO NOT: run cord under carpeting or
cover cord with throw rugs, runner, or similar covering. Arrange cord away from trac
areas and where it will not be tripped over.
•
WARNING: To reduce the risk of re or shock, DO NOT use this fan with any
solid-state speed control device.
• This product employs overload protection (fuse). A blown fuse indicates an overload or
short-circuit situation. If the fuse blows, unplug the fan from the outlet. Replace the fuse
as per the user Servicing Instructions (following product marking for proper fuse rating)
and check the fan. If the replacement fuse blows, a short-circuit may be present and the
product should be discarded or returned to an authorized service facility for examination
and/or repair.
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to t in a polarized outlet only one way. If the
plug does not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied
electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT
THIS SAFETY FEATURE IN ANY WAY.