2. Computers & electronics
  3. Audio & home theatre
  4. Portable speakers
  5. Sytech
  6. SY1244PUR
SY1244PUR

Sytech SY1244PUR, SY1244AZ, SY1244NG, SY1244RJ, SY1244VR Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Sytech SY1244PUR Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How can I play music from a Micro SD card?
    How do I control the volume?
    Can I connect an external device to the speaker?
    How long does it take to charge the speaker?
    What is the battery capacity of the speaker?
    What is the maximum output power of the speaker?
    What is the frequency response of the speaker?
    What is the signal-to-noise ratio of the speaker?
    What is the distortion of the speaker?
    What is the battery voltage of the speaker?
SY-1244
Rechargeable Micro SD MP3 Speaker capsule
-Contents:
1.1 pcs. Capsule speaker
2.1 pcs. USB cable
3.1pcs. User manual
Parts:
1. USB charging port and audio input jack
2. Micro SD slot
3. Reset key
4. Slide control key
5. Strap hole
6. Switch button
7. LED indicator
8. Audio output jack
How to playback music
1. Micro SD card
a) Insert a Micro SD into the “TF” slot
b) Turn the switch to “TF” mode. The LED will flash.
c) Volume control:
Turn the slide key towards the right for 2 seconds for increasing the volume.
Turn the slide key towards the left for 2 seconds for decreasing the volume.
d) Previous/next song control:
Previous song: Turn the slide key shortly towards the left.
Next song: Turn the slide key shortly towards the right.
c) Audio output: the SY-1244 has an audio output function which allows you to connect
an earphone or another mini speaker to the output jack. Enjoy your speaker as an
MP3 player.
Connecting an external device
It is also possible to connect any external device and use the SY-1244 as a normal
speaker. Use the supplied cable and connect the USB plug to the speaker USB port and
the 3.5mm jack to the external device.
1. Turn the switch to “input” mode
2. In this mode, the volume control of the speaker will be disabled.
3. Connect the external device to the SY-1244.
Charging the Speaker
Use the supplied standard USB cable to connect the spekaer to a PC USB port or to an
external compatible AC adaptor.
Opening and closing the capsule speaker
Specifications
Output: 2.4W
Rating power:1.8W
Size:50W x 50L x 35H(mm)
Step 1
Align markings along with the USB
port as shown.
Step 2
Press inwards until both sides meets
Step 3
Ensure that both sides of markings meets as
shown in diagram
Step 4
Twist clockwise to secure capsule in place
Twist anti-clockwise to release capsule
Speaker:36mm micro speaker, 4 Ohm
Frequency Response: 100Hz-20kHz
Signal-to-Noise:>85dB
Distortion:< 0.5%
Battery Voltage:3.7V
Battery Capacity: 250MAH
Battery Charging Voltage: 4.2V +/- 0.05V
Charge time :DC – 1hour, USB – 1hour
Playback time: aprox. 3 Hours.
Micro SD capacity: 1GB~16GB.
Max. Output: 2,4 W.
Rating Power: 1.8W.
Dimensions: 50w x 50l x 50h mm.
Note:
Sound clarity may be affected if the speaker is charged longer that the stipulated time of 4
hours as this is normal under proper working condition,the speaker will self regulate to its
optimized state after leaving it on to play for some time.
/