Thermador VTI1010P Installation guide

Type
Installation guide

Thermador VTI1010P is a reliable ventilation blower that can be used to improve the air quality in your home. This powerful blower is designed to be installed in an exhaust-air mode, which means that it will pull air out of your home and expel it outdoors. The VTI1010P is also equipped with a variety of features that make it easy to use and maintain, including a built-in speed control and a washable filter.

Here are some of the benefits of using the Thermador VTI1010P ventilation blower:

  • Helps to improve air quality by removing pollutants and odors from the air.
  • Can help to reduce energy costs by circulating air and reducing the need for air conditioning or heating.

Thermador VTI1010P is a reliable ventilation blower that can be used to improve the air quality in your home. This powerful blower is designed to be installed in an exhaust-air mode, which means that it will pull air out of your home and expel it outdoors. The VTI1010P is also equipped with a variety of features that make it easy to use and maintain, including a built-in speed control and a washable filter.

Here are some of the benefits of using the Thermador VTI1010P ventilation blower:

  • Helps to improve air quality by removing pollutants and odors from the air.
  • Can help to reduce energy costs by circulating air and reducing the need for air conditioning or heating.
Table of Contents
This Thermador appliance is made by
BSH Home Appliances Corporation
1901 Main Street, Suite 600
Irvine, CA 92614
Questions?
1-800-735-4328
www.thermador.com
We look forward to hearing from you!
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Step 1: EXHAUST-AIR MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Step 2: PREPARING THE WALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Step 3: INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Wire Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Customer Support, Accessories & Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .back page
Safety Definitions
NOTICE: This indicates that damage to the appliance or property may occur as a result of non-compliance with this
advisory.
Note: This alerts you to important information and/or tips.
WARNING
This indicates that death or serious injuries may occur as
a result of non-observance of this warning.
CAUTION
This indicates that minor or moderate injuries may occur
as a result of non-observance of this warning.
English 1
Safety
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT: Save these Instructions for the Local Gas
Inspector’s use.
INSTALLER: Please leave these Installation Instructions
with this unit for the owner.
OWNER: Please retain these instructions for future
reference.This appliance conforms to the relevant safety
regulations.
Repairs should only be carried out by qualified specialists.
Check if this blower is recommended by the manufacturer
to be installed with the hood.
Grounding instructions
This appliance must be grounded. In the event of an
electrical short-circuit, grounding reduces the risk of electric
shock by providing an escape wire for the electric current.
None of the packing materials cause pollution to the
environment and all can be recycled for use again. Please
help to protect the environment and dispose of the
packaging in an environment-friendly manner.
Remove all tape and packaging before using the appliance.
Destroy or recycle the packaging after unpacking the
appliance.
Never allow children to play with packaging material.
WARNING
To avoid electrical shock hazard, before installing,
switch power off at the service panel and lock the panel
to prevent the power from being switched on
accidentally.
WARNING
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK,
OR INJURY TO PER
SONS, OBSERVE THE
FOLLOWING:
a) Installation work and electrical wiring must be done
by qualified person(s) in accordance with all
applicable codes and regulations, including fire-
related construction.
b) Sufficient air is needed for proper combustion and
exhausting of gases through the flue (chimney) of
fuel burning equipment to prevent back drafting.
Follow the heating equipment manufacturers
guideline and safety standards such as those
published by the National Fire Protection
Association (NFPA), and the American Society for
Heating, Refrigeration and Air Conditioning
Engineers (ASHRAE), and the local code
authorities.
c) When cutting or drilling into wall or ceiling, do not
damage electrical wiring and other hidden utilities.
d) To properly exhaust air, be sure to duct air outside.
DO NOT vent exhaust air into spaces within walls,
ceilings, attics, crawl spaces, or garages.
CAUTION
FOR GENERAL VENTILATING USE ONLY. DO NOT
use to exhaust hazardous or explosive materials and
vapors.
WARNING
To reduce the risk of fire or electric
shock, do not use
this blower with any solid-state
speed control device.
WARNING
State of California Proposition 65 Warnings:
This product contains chemicals known to the State of
California to cause cancer, birth defects or other
reproductive harm.
WARNING
To reduce the risk of fire, use only metal ductwork.
WARNING
Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding
instructions are not completely understood, or if doubt as
to whether the appliance is properly grounded.
English 2
Installation
Step 1: EXHAUST-AIR MODE
Equipment Needed
Equipment Included
Exhaust air should not be directed into a smoke or exhaust
flue that is currently used for other purposes, nor into a
shaft that is used for ventilating rooms in which stoves or
fireplaces are also located.
Exhaust air must be discharged in accordance with official
and statutory regulations only (e.g. national building
regulations).
Local regulations must be observed when discharging air
into smoke or exhaust flues that are not otherwise in use.
When the extractor hood is operated in exhaust-air mode
simultaneously with a different burner which also makes
use of the same chimney (such as gas, oil or coal-fired
heaters, continuous-flow heaters, hot-water boilers), care
must be taken to ensure that there is an adequate supply of
fresh air, which will be needed by the burner for
combustion.
Safe operation is possible provided that the under-pressure
in the room where the burner is installed does not exceed 4
Pa (0.04 mbar).
This can be achieved if combustion air can flow through
non-lockable openings, e.g. in doors, windows and via the
air-intake/exhaust-air wall box or by other technical
measures, such as reciprocal interlocking, etc.
If the air intake is inadequate, there is a risk of carbon
monoxide poisoning from combustion gases which are
drawn back into the room.
An air-intake/exhaust-air wall box by itself is no guarantee
that the limiting value will not be exceeded.
NOTE: When assessing the overall requirement, the
combined ventilation system for the entire household must
be taken into consideration. This rule does not apply to the
use of cooking appliances, such as ranges and ovens.
Step 2: PREPARING THE
WALL
The wall must be flat and perpendicular.
Ensure that the wall is capable of providing a firm hold
for mounting screws and anchors.
Weight: 15.4 kg / 39 lbs
Technical
Information
Electrical Requirements: 120 V; 60 Hz, max. 5.7 A
Duct Size: 6" (152 mm)
Drill and Bit
Screwdriver
Rubber Mallet
Anchors (4)
Screws (4)
Connector
IMPORTANT SAFETY INSTRUCTIONS
Attach the inner wall blower inside the building only,
but not in living rooms.
When attaching the inner wall blower, ensure that it
is accessible for maintenance and repairs.
The plug-and-socket connections of the electric
cables must be located inside the building,
according to local code.
DO NOT reduce the 10" (254 mm) diameter of the
pipes connected to the extractor hood except when
used with downdraft systems.
DO NOT install the blower
outdoors
.
in an environment with dripping water.
near flammable materials.
in rooms which may contain gas or other fuels.
English 3
Step 3: INSTALLATION
1. Hold the blower on the wall.
Note the direction of the air conduction.
2. Mark the 4 mounting boreholes.
At least one screw must be installed through a
stud.
All hardware must be suitable for the wall’s
construction materials.
3. Drill the 4 x ¼'' (6.35 mm) Ø mounting boreholes.
Insert wall anchors and screw the blower to the wall.
4. Connect the ducting from the blower to the extractor
hood and feed to the outside.
5. Connect the blower to the extractor hood with an
extension cable, if required.
Use the added connector to hard-wire to the blower, if
required.
Use the wire diagram for connecting.
NOTE: Confirm that the blower is securely attached to the
wall and all connections are secure.
WARNING
The additional cover on the plug must always be
attached and closed for safety reasons.
Not needed wires must be isolated, capped with
wire
nuts and stored in a safe position.
19⅛" (485 mm)
19⅛" (485 mm)
19⅛" (485 mm)
15⅛"
(384 mm)
15⅛"
(384 mm)
15⅛"
(384 mm)
10"
(254 mm)
10"
(254 mm)
10"
(254 mm)
10"
(254 mm)
10"
(254 mm)
10"
(254 mm)
12"
(305 mm)
12"
(305 mm)
12"
(305 mm)
English 4
Wire Diagram
speed 1 (red)
speed 2 (blue)
speed 3 (orange)
speed 4 (brown)
N (white)
PE (green/yellow)
NOTE: If using a three speed hood, connect
speed 1 (red) , speed 2 (blue) and speed 4
(brown). Cap off speed 3 (orange).
THERMADOR
®
Service/Entretien/Mantenimiento
1901 Main Street, Suite 600, Irvine, CA 92614 • 800-735-4328 • www.thermador.com
9001070738 • Rev. A • 5U06QG • © BSH Home Appliances Corporation, 05/15
Service
We realize that you have made a
considerable investment in your
kitchen. We are dedicated to
supporting you and your appliance
so that you have many years of
creative cooking.
Please don't hesitate to contact our
excellent STAR
TM
Customer
Support Department if you have any
questions or in the unlikely event
that your THERMADOR
®
appliance
needs service. Our service team is
ready to assist you.
USA:
800-735-4328
www.thermador.com/support
Canada:
800-735-4328
www.thermador.ca
Parts & Accessories
Parts, filters, descalers, stainless
steel cleaners and more can be
purchased in the THERMADOR
eShop or by phone.
USA:
www.thermador-eshop.com
Canada:
Marcone 800-287-1627
or
Reliable Parts 800-663-6060
Entretien
Nous savons bien que vous avez
investi une somme considérable dans
votre cuisine. Nous nous faisons un
devoir de vous soutenir pour que vous
puissiez profiter pleinement d’une
cuisine où vous pourrez exprimer
toute votre créativité de nombreuses
années durant.
N’hésitez pas à communiquer avec
l’un des membres chevronnés de
notre équipe de soutien au client si
vous avez des questions ou dans le
cas plutôt improbable où votre
appareil THERMADOR
MC
aurait
besoin d’entretien. Notre équipe sera
prête à vous aider.
É.-U. :
800-735-4328
www.thermador.com/support
Canada :
800-735-4328
www.thermador.ca
Pièces et Accessoires
Vous pouvez vous procurer par
téléphone ou à notre boutique
THERMADOR en ligne des pièces,
des filtres, des produits nettoyants
pour acier inoxydable et plus encore.
É.-U. :
www.thermador-eshop.com
Canada :
Marcone 800-287-1627
or
Reliable Parts 800-663-6060
Mantenimiento
Nos damos cuenta que Usted invirtió
una suma considerable en su
cocina. Nos dedicamos a atenderle
para que pueda sacar provecho de
una cocina donde podrá expresar
toda su creatividad durante muchos
años.
Por favor, no dude en ponerse en
contacto con uno de nuestros
empleados ESTRELLAS
TM
de
atención al cliente si tiene preguntas
o en el caso más bien improbable
que su aparato THERMADOR
®
necesite mantenimiento. Nuestro
equipo estará listo para ayudarle.
EEUU:
800-735-4328
www.thermador.com/support
Canadá:
800-735-4328
www.thermador.ca
Piezas y Accesorios
Usted puede comprar piezas, filtros,
productos de limpieza para acero
inoxidable por teléfono o en nuestra
tienda THERMADOR en línea.
EEUU:
www.thermador-eshop.com
Marcone 800-287-1627
or
Reliable Parts 800-663-6060
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Thermador VTI1010P Installation guide

Type
Installation guide

Thermador VTI1010P is a reliable ventilation blower that can be used to improve the air quality in your home. This powerful blower is designed to be installed in an exhaust-air mode, which means that it will pull air out of your home and expel it outdoors. The VTI1010P is also equipped with a variety of features that make it easy to use and maintain, including a built-in speed control and a washable filter.

Here are some of the benefits of using the Thermador VTI1010P ventilation blower:

  • Helps to improve air quality by removing pollutants and odors from the air.
  • Can help to reduce energy costs by circulating air and reducing the need for air conditioning or heating.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI