Gas hob
Газовая варочная панель
EHT 6415
operating instuctions
Руководство пользователя
RU
2 electrolux
electrolux 3
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will
provide you with lots of pleasure in the future.
The Electrolux ambition is to offer a wide variety of quality products that make
your life more comfortable.
You find some examples on the cover in this manual. Please take a few minutes
to study this manual so that you can take advantage of the benefits of your new
machine.
We promise that it will provide a superior User Experience delivering Ease-of-
Mind.
Good luck!
4 electrolux
This appliance is manufactured according to the following EEC directives:
73/23 EEC - 90/683 EEC - 93/68 EEC -
89/336 EEC - 90/396 EEC,
current edition.
Guide to Use the instructions
The following symbols will be found in the text to guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
Hints and Tips
Environmental Information
!!
!!
!
Contents
Instructions for the User
Important Safety Information 5
Description of the Hob 7
Operation 8
Maintenance and Cleaning 10
Something Not Working? 12
Service and original spare parts
Instructions for the Installer
Engineers Technical Data 13
Gas Connection 15
Electrical Connection 17
Adaptation to different Types of Gas 18
Building In 19
Possibilities for Insertion 21
electrolux 5
During Operation
• This appliance has been designed for non professional purpose in private houses only. It is meant
to cook edible foodstuff only and MUST NOT be used for any other purposes.
• It is dangerous to alter the specification in any way.
• For hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats
or other foodstuff could result in a fire.
• Do not use this hob if it is in contact with water. Do not operate the hob with wet hands.
• Never leave the hob unattended when cooking with oil and fats.
• Unstable or misshapen pans should not be used on the hob as unstable pans can cause an accident
by tipping or spillage.
• Never use plastic or aluminium foil dishes on the hob.
• Perishable food, plastic items and areosols may be affected by heat and should not be stored above
or below the hob unit.
• Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service
Centre. Always insist on genuine spare parts.
• Ensure that all control knobs are in the OFF position when not in use.
• Should you connect any electrical tool to a plug near this cooking appliance, ensure that electric cables
are not in contact with it and keep them far enough from the heated parts of this appliance.
• If the appliance is out of order, disconnect it from the electric supply.
Child Safety
• This appliance is not intended for use by children or other persons whose physical, sensory or mental
capabilities or lack of experience and knowledge prevents them from using the appliance safely
without supervision or instruction by a responsible person to ensure that they can use the appliance
safely.
• This appliance has been designed to be operated by adults and children under supervision. Young
children MUST NOT be allowed to tamper with the controls or play near or with the oven.
These warnings are provided in the interest of safety. You must read them carefully before
installing or using the appliance.
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred, always ensure that the book is left
with the appliance in order that the new owner can get to know the functions of the appliance
and the relevant warnings.
These instructions are only valid for countries whose identification symbols are shown on
the cover of this instruction booklet and on the appliance itself.
Important Safety Information
ENGLISH
6 electrolux
• Accessible parts of this appliance may become hot when it is in use. Children should be KEPT AWAY
until it has cooled.
• Children can also injure themselves by pulling pans or pots off the hob.
About Installation, Cleaning and Manteinance
• It is mandatory that all operations required for the installation are carried out by a qualified or competent
person, in accordance with existing rules and regulations in force in the country where the appliance
is used.
• Ensure a good ventilation around the appliance. A poor air supply could cause lack of oxygen.
• Ensure that the gas and electrical supply complies with the type stated on the identification label, placed
near the gas supply pipe.
• This appliance is not connected to a combustion products evacuation device. It must be installed and
connected in accordance with current installation regulations. Particular attention shall be given to the
relevant requirements regarding ventilation.
• The use of a gas cooking appliance results in the production of heat and moisture in the
room in which it is installed. Ensure that the kitchen is well ventilated: keep natural
ventilation holes open or install a mechanical ventilation device (mechanical extractor
hood).
• Prolonged intensive use of the appliance may call for additional ventilation, for example
opening of a window, or more effective ventilation, for example increasing the level of
mechanical ventilation where present.
• Once you removed all packaging from the appliance, ensure that it is not damaged and the electric
cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation.
• Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance
work.
• This appliance cannot be cleaned with steam or with a steam cleaning machine.
• The residual heat indicator comes on when the cooking zone is switched on. Children should be
kept away until it switches off.
• Never use the ceramic hob as a working space. Do not store things on the ceramic hob.
• Never use plastic or aluminium foil dishes on the ceramic hob, as they could melt on the hob, thus
damaging it. Anyway,If anything of this nature accidentally comes into contact with the ceramic
surface it must be scraped off immediately while stlll hot and wiped away to avoid damage to the
surface. In the same way, remove sugar or food residues with hich sugar content, which may have
split from saucepans by using a scraper for ceramic hobs.
• Unstable or misshapen pans should not be used on the ceramic hob as unstable pans can cause an
accident by tipping or spillage.
• The ceramic hob is shockproof, but not unbreakable! Hard or pointed objects falling from a height
can damage the hob. If scratches or cracks are noticed, disconnect the appliance from the electrical
supply to avoid the risk of electric shock and call you nearest Service Force Centre.
Never use scratching sponges, abrasive products or chemically powerful detergents. Use only
cleaning agents specific for ceramic hobs.
• The manufacturer disclaims any responsability should all the safety measures not be
carried out.
electrolux 7
1. Hob Top
2. Rapid Burner
3. Semi-rapid Burner
4. Auxiliary Burner
5. Control knob for back right burner (semi-rapid)
6. Control knob for back left burner (semi-rapid)
7. Control knob for front left burner (rapid)
8. Control knob for front right burner (auxiliary)
Description of the Hob
1
3
3
5
6
7
8
2
4
Service
• Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service
Centre. Always insist on genuine spare parts.
Environmental Information
• After installation, please dispose of the packaging with due regard to safety and the environment.
• When disposing of an old appliance, make it unusable, by cutting off the cable.
• The symbol on the product or on its packaging indicates that this product may not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. For more detailed information
about recycling of this product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
8 electrolux
Hob Burners
To light a burner:
" turn the relevant knob anticlockwise to
maximum position and push down the knob to
ignite.
" After lighting the flame, keep the knob pushed
down for about 5 seconds. This will allow the
"thermocouple" (Fig. 2 - lett. D) to be heated
and the safety device to be switched off,
otherwise the gas supply would be interrupted.
Then, check the flame is regular and adjust it
as required.
If you cannot light the flame even after several
attempts, check the "cap" (Fig. 1 - lett. A) and
“crown” (Fig. 1 - lett. B) are in the correct position.
To put the flame out, turn the knob to the symbol
.
In the absence of electricity, ignition can
occur without the electrical device; in this case approach the burner with a
flame, push the relevant knob down and turn it anti-clockwise until it reaches
the"maximum" position.
When switching on the mains, after installation or a power cut, it is quite normal
for the spark generator to be activated automatically.
Operation
!!
!!
!
Fig. 1
A - Burner cap
B - Burner crown
C - Ignition electrode
D - Thermocouple
INSTALLATION
Any gas installation must be carried out by qualified personnel, and in
accordance with existing rules and regulations.
The relevant instructions are to be found in the second section of this manual.
Please, ensure that, once the hob is installed, it is easily accessible for the
engineer in the event of a breakdown.
The manufacturer will not accept liability, should the above instructions or any
of the other safety instructions incorporated in this book be ignored.
WHEN THE HOB IS FIRST INSTALLED
Once the hob has been installed, it is important to remove any protective materials,
which were put on in the factory.
electrolux 9
Burner minimum maximum
diameter diameter
Large (rapid) 160 mm 260 mm
Medium (semi-rapid) 120 mm 220 mm
Small (auxiliary) 80 mm 160 mm
As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid
simmering.
Use only pans or pots with flat bottom.
If you use a saucepan which is smaller than the recommended size, the flame will
spread beyond the bottom of the vessel, causing the handle to overheat.
Carefully supervise cooking with fat or oil, since these types of foodstuff can result in a fire,
if over-heated.
Prolonged cooking with potstones, earthenware pans or cast-iron plates is
inadvisable. Also, do not use aluminium foil to protect the top during use.
Make sure pots do not protrude over the edges of the cooktop and that
they are centrally positioned on the rings in order to obtain lower gas
consumption.
Do not place unstable or deformed pots on the rings: they could tip
over or spill their contents, causing accidents.
Pots must not enter the control zone.
If the control knobs become difficult to turn, please contact your local Service
Force Centre.
Using the hob correctly
To ensure maximum burner efficiency, it is strongly recommended that you use only pots
and pans with a flat bottom fitting the size of the burner used, so that flame will not spread
beyond the bottom of the vessel (see the table beside).
10 electrolux
Before any maintenance or cleaning can be carried out, you must DISCONNECT
the hob from the electricity supply.
The hob is best cleaned whilst it is still warm, as spillage can be removed more
easily than if it is left to cool.
This appliance cannot be cleaned with steam or with a steam cleaning machine.
The pan supports
The pan supports can be removed to easily clean
the hob. After cleaning the hob, make sure the pan
supports are correctly positioned.
Pay attention when replacing the pan
supports in order to avoid scratching
the glass hob top.
If washing the pan supports by hand,
take care when drying them as the
enamelling process occasionally
leaves rough edges. If necessary,
remove stubborn stains using a paste
cleaner.
The hob top
Clean the hob while it is still warm.
Never use aggressive or abrasive agents, such as oven sprays, stain or rust removers, scouring
powders, or sponges with an abrasive effect.
Special cleaning agents and ceramic hob scrapers are available from department stores.
Slight, non-burnt soilage can be wiped off with a damp cloth. Burnt soilage has to be removed with a
scraper. Afterwards wipe off the ceramic hob with a damp cloth.
Light metallic stains (aluminium residues) can be removed from the cooking zone with a ceramic hob
cleaning agent such as Vitroclen when cool.
Sugar solutions, food stuffs with a high sugar content must be removed immediately with a scraper. If this
type of soilage is not removed immediately it can cause irreparable damage to the ceramic surface.
When the surface has cooled wipe over with a damp cloth and Vitroclen.
Before using any detergent or cleaning agent on the ceramic top, ensure they are recommended by the
manufacturer for use on ceramic hobs.
Do not apply any cleaning agents to hot cooking zones. Ensure any residues are wiped off before the
cooking zones are used again.
If scratches or cracks are noticed, disconnect the appliance from the
electrical supply to avoid the risk of electric shock and call your nearest
Service Force Centre.
Maintenance and Cleaning
Fig. 2
electrolux 11
Periodic maintenance
Periodically ask your local Service Centre to check the conditions of the gas supply pipe
and the pressure adjuster, if fitted.
Ignition electrode
The electric ignition is obtained through a ceramic "electrode" and a metal electrode
(Fig. 1 - letter C). Keep these components well clean, to avoid difficult lighting, and check
that the burner crown holes are not obstructed.
Keep all objects and materials which can melt away from the cooking surface, e.g. plastics,
aluminium foil.
Care should be taken when preparing food or drinks containing sugar. If anything of this nature
accidentally comes into contact with the ceramic surface it must be scraped off immediately while
stlll hot and wiped away to avoid damage to the surface.
The burners
The burner caps and crowns can be removed for cleaning.
Wash the burners taps and crowns using hot soapy water, and remove marks with a mild
paste cleaner. A well moistened soap impregnated steel wool pad can be used with
caution, if the marks are particularly difficult to remove.
After cleaning, be sure to wipe dry with a soft cloth.
12 electrolux
Something Not Working?
If the hob is not working correctly, please carry out the following checks before contacting
your local Electrolux Service Force Centre.
SYMPTOM
# There is no spark when lighting the
gas.
# The gas ring burns unevenly.
SOLUTION
$ Check that the unit is plugged in and
the electrical supply is switched on.
$ Check that the general safety switch
has not tripped (if fitted).
$ Check the mains fuse has not blown.
$ Check the burner cap and crown
have been replaced correctly, e.g.
after cleaning.
$ Check the main jet is not blocked and
the burner crown is clear of food
particles.
$ Check the burner cap and crown
have been replaced correctly, e.g.
after cleaning.
electrolux 13
OVERALL DIMENSIONS Width: 580 mm
Depth: 510 mm
CUT OUT DIMENSIONS Width: 550 mm
Depth: 470 mm
APPLIANCE CLASS 3
SUPPLY CONNECTIONS Gas:
RC 1/2 inch (1/2 inch male) Rear right hand corner
Electric:
230 V
~ 50 Hz supply, 3 core flexible cable
HEAT INPUT
Rear Left Burner 1.9 kW
(semi rapid)
Front Left Burner 2.9 kW Natural gas
(rapid) 2.7 kW Liquid gas
Rear Right Burner 1.9 kW
(semi rapid)
Front Right Burner 1.0 kW
(auxiliary)
APPLIANCE CATEGORY II2H3B/P
GAS SUPPLY Natural gas
G20/20 mbar
Instructions for the Installer
Engineer technical data
14 electrolux
TYPE BURNER INJECTORS NORMAL REDUCED NORMAL FEEDING
OF GAS POWER POWER POWER PRESSURE
1/100 mm kW kW m
3
/h g/h mbar
Rapid 119 2,9 0,75 0,276 -
Semi-rapid 96 1,9 0,45 0,181 - 20
Auxiliary 70 1,0 0,33 0,095 -
Rapid 86 2,7 0,75 - 196
Semi-rapid 71 1,9 0,45 - 138 30
Auxiliary 50 1,0 0,33 - 73
Rapid 120 1,8 0,75 0,191 -
Semi-rapid 105 1,4 0,45 0,148 - 13
Auxiliary 80 0,9 0,33 0,095 -
* Injectors for natural gas G20 13 mbar are for Russia only
NATURAL
GAS
LIQUID
GAS
NATURAL
GAS
*
Burner Ø By-pass
in 1/100
of mm
Auxiliary 28
Semi-rapid 32
Rapid 42
Table 2 : Injectors
Table 1 : By-pass diameters
electrolux 15
" The following instructions about installation and maintenance must be carried out
by qualified personnel in compliance with the regulation in force.
" The appliance must be electrically disconnected before all interventions. If any
electric supply to the appliance is required to carry out the work, ensure all the
necessary precautions are followed.
" The side walls of the unit in which the hob is going to be installed, must not exceed
the height of the working top.
" Avoid installing the appliance in the proximity of inflammable materials (e.g. curtains,
tea towels etc.).
THE MANUFACTURER WILL NOT ACCEPT LIABILITY, SHOULD ANY OF THE OTHER
SAFETY INSTRUCTIONS INCORPORATED IN THIS BOOKLET OR THE REGULATION IN
FORCE BE IGNORED.
Instruction for the Installer
Gas Connection
Choose fixed connections or use a flexible pipe instainless steel in compliance with the regulation in
force. If using flexible metallic pipes, be careful they do not come in contact with mobile parts or they are
not squeezed. Use the same attention when the hob is combinated with an oven.
IMPORTANT - To ensure a correct operation, a savingof energy and the long life of the appliance,
the voltage pressure of the appliance must correspond to the recommended values. The adjustable
connection is fixed to the comprehensive ramp by means of a threaded nut G 1/2".
Interpose the sealing between the components as shown in Fig. 3.
Screw the parts without forcing, adjust the connection in the required direction and tighten everything.
16 electrolux
Connection using flexible non metal pipes
When the connection can be easily inspected in its full extent, there is the chance to use a flexible pipe
according to the rules in force. The flexible pipe must be tightly fixed using clamps according to the rules
in force.
Always insert the gasket «B». Then proceed with the gas connection. The flexible pipe should be
made ready for use in such a way that:
- nowhere it can reach overtemperature, other than room temperature, higher than 30°C; if the
flexible pipe, to reach the cock, must run behind the range, it must be installed as shown in Fig. 3;
- it is no longer than 1500 mm;
- it shows no throttles;
- it is not subject to traction or torsion;
- it doesn't get in touch with cutting edges or corners;
-it can be easily inspected in order to check its condition.
The control of preservation of the flexible pipe consistsin checking that:
- it doesn't show cracks, cuts, marks of burnings bothon the end parts and on its full extent;
- the material is not hardened, but shows its normal
elasticity;
- the fastening clamps are not rusted;
- expiry term is not due.
If one or more abnormalities are seen, do not repair the
pipe, but replace it.
It is important to install the elbow correctly, with the
shoulder on the end of the thread, fitted to the hob
connecting pipe.
Failure to ensure the correct assembly will cause
leakage of gas.
IMPORTANT
Once installation is complete, check the perfectseal
of every pipe fitting, using a soapy solution, never
a flame.
Natural gas
Fig. 3
A) Ramp with ending nut
B) Seal
C) Adjustable connection
electrolux 17
The appliance is designed to be connected to 230 V monophase electricity supply.
The connection must be carried out in compliance with the laws and regulations in force.
Before the appliance is connected:
1) check that the main fuse and the domestic installation can support the load (see the rating label);
2) check that the power supply is properly earthed in compliance with the current rules;
3) check the socket or the double pole switch used for the electrical connection can be easily reached
with the appliance built in the forniture unit.
The appliance is supplied with a connection cable. This has to be provided with a proper plug, able to
support the load marked on the identification plate. The plug has to be fitted in a proper socket.
If connecting the appliance directly to the electric system, it is necessary that you install a double pole
switch between the appliance and the electricity supply, with a minimum gap of 3 mm. between the switch
contacts and of a type suitable for the required load in compliance with the current rules.
The connection cable has to be placed in order that, in each part, it cannot reach a temperature higher
than 90°C.
The brown coloured phase cable (fitted in the terminal block contact marked with "L") must always be
connected to the network phase.
Replacement of the voltage cable
The replacement of electric cable must be
carried out exclusively by the technical
assistance centre or by personnel with
similar competencies, in accordance with
the current regulations.
Only cable type H05V2V2-F T90 must be used. The
cable section must be suitable to the voltage and the
working temperature.
The yellow/green earth wire must be approximately
2 cm longer than the phase wires (Fig. 4).
Electrical Connection
Fig. 4
Neutral
Earth (yellow/green)
18 electrolux
Injectors replacement
• Remove the pan supports.
• Remove the burner's caps and crowns.
• With a socket spanner 7 unscrew and remove the
injectors (Fig. 5), and replace them with the ones
required for the type of gas in use (see table
2:Injectors).
• Reassemble the parts, following the same proce-
dure backwards.
• Replace the rating label (placed near the gas
supply pipe) with the relevant one for the new type
of gas supply. You can find this label in the package
of the injectors supplied with the appliance.
Should the feeding gas pressure be different or
variable compared with the required pressure, an
appropriate pressure adjuster must be fitted on the gas supply pipe, in compliance with the rules in
force.
Adjustment of minimum level
To adjust the minimum level of the burners, proceed as
follows:
• Light the burner.
• Turn the knob on the minimum position.
• Remove the knob.
• With a thin screwdriver, adjust the by-pass screw
positioned in the centre of the gas tap control shaft
(see Fig. 6). If changing from natural gas 20 mbar
to liquid gas, completely tighten the adjustment
screw in. If changing from liquid gas to natural gas
20 mbar, undo the by-pass screw about 1/4 of a turn. If changing from natural gas 20 mbar to natural
gas 13 mbar undo the by-pass screw about 1/4 of a turn. If changing from liquid gas to natural gas
13 mbar, undo the by-pass screw about 3/4 of a turn.
• Finally check the flame does not go out when quickly turning the knob from the maximum position to
the minimum position.
This procedure can easily be carried out, anyhow the hob has been positioned or built in the working
top.
Adaptation to different Types of Gas
Fig. 5
Fig. 6
Minimum adjustment screw
electrolux 19
Building In
A = Auxiliary burner
SR = Semi-rapid burner
R = Rapid burner
Dimensions are given in millimeters
Fig. 7
Cut Out Size
The dimensions of the cut-out are given in the picture.
The hob can be inserted in a built-in kitchen unit whose depth is between 550 mm and 600 mm.
The hobs dimensions are shown in Fig. 7.
The edge of the cut out must have a minimum distance from the rear wall of 55 mm.
If there are side walls, or sides of the furniture unit near the hob, the cut out edges must have a
minimum distance of 100 mm.
Hanging forniture units or hoods must be placed at 650 mm minimum from the hob.
550
470
580
510
55 min.
SR
SR
A
R
20 electrolux
Fitting the hob to the worktop
Before fitting the hob into the cut out, an adhesive
seal must be fitted to the underside outside edge
of the hob. It is essential that no gaps are left in this
seal in order to prevent spillage near the hob
seeping into the cabinet below.
1) Remove the pan supports, the burners caps
and crowns and turn the hob upside down,
taking care the ignition candles are not
damaged in this operation.
2) Place the relevant sealing all around the glass
top edge, taking care that the sealings meet
without overlapping (Fig. 8).
3) Place the hob in the cut out, taking care of its
centring.
4) Fix the hob with the relevant screws(Fig. 9).
A) Sealing gasket
Fig. 8
Fig. 9
A
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Electrolux EHG3761X User manual
-
-
-
-
-
-
-
-
-