Philips MCM761/12 Quick start guide

Category
Home audio sets
Type
Quick start guide
1
3
2
1
Quick Start Guide
2
User Manual
MCM761
What’s in the Box?
You should nd these items upon opening the box.
Quick Start Guide
Quick start guide
User manual
Remote control with
2 AA batteries
1 x FM wire antenna 1 x MW loop antenna
1 x AC power cable
MCM761_12_QSG_Eng.indd 1MCM761_12_QSG_Eng.indd 1 3/18/2009 1:34:37 PM3/18/2009 1:34:37 PM
3
5
2
1
4
6
In the standby mode, press DISPLAY/CLOCK to activate the clock setting mode.
Press PROGRAM repeatedly to select 12 hour or 24 hour format.
Press VOL +/- to set the hour.
Press
ÉÅ
to con rm.
Press VOL +/- to set the minute.
Press DISPLAY/CLOCK to con rm.
1
2
Connect the speaker cables.
Speaker
(right)
Speaker
(left)
MW loop antenna
AC power cable
Tip
See the User Manual on how to
connect other equipment to this
system.
Set clock
Connect the MW and FM antennas.
FM wire antenna
3
Connect the supplied AC power cable to the main
unit and the wall socket.
1
1
2
2
3
MCM761_12_QSG_Eng.indd 2MCM761_12_QSG_Eng.indd 2 3/18/2009 1:34:41 PM3/18/2009 1:34:41 PM
1
3
5
2
4
Press CD to select the disc source.
Press OPEN/CLOSE
0
on the main unit to open the disc compartment.
Insert a disc with the printed side facing up, then close the disc compartment.
If the disc doesn’t play, press
ÉÅ
.
To stop play, press
9
.
Play disc
1
2
3
Press TUNER repeatedly to select FM or MW.
Press PROGRAM for more than two seconds to program all available stations in
order of waveband.
Press PRESET
J
/
K
to select a preset number.
Listen to radio
MCM761_12_QSG_Eng.indd 3MCM761_12_QSG_Eng.indd 3 3/18/2009 1:34:42 PM3/18/2009 1:34:42 PM
PDCC-JH/ZYL-0912
C
Royal Philips Electronics N.V. 2009
All rights reserved.
http://www.philips.com
Tip
Detailed play features and additional functions are described in the supplied user
manual.
1
2
3
Insert the USB device into the socket
on the main unit.
Press USB to select the USB source.
Play the USB’s audio les as you do with the albums/tracks on a CD.
Play USB
With this Hi-Fi, you can use USB ash memory (USB 2.0 or USB1.1),
USB ash players
(USB 2.0 or USB1.1)
,
memory cards (requires an
additional card reader to work with this Mini Hi-Fi).
1
2
3
USB record
4
Insert the USB device into the socket
on the main unit.
Load a disc.
Press USB RECORD to start recording.
To stop recording, press
9
.
EN
MCM761_12_QSG_Eng.indd 4MCM761_12_QSG_Eng.indd 4 3/18/2009 1:34:43 PM3/18/2009 1:34:43 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Philips MCM761/12 Quick start guide

Category
Home audio sets
Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI