MCM207
What’s in the Box?
You should nd these items upon opening the box.
Quick Start Guide
Remote Control
Quick Start Guide
User Manual
Power adapter
MCM207_12_QSG_Eng.indd 1 2009-9-24 16:24:45
1
2
Connect the speaker cables.
Tip
See the User Manual for how to
connect other equipment to this
system.
Connect the AC power adapter to the
wall socket.
Set clock
Important!
– If in Eco Power Standby mode, press CLOCK to show clock rst, then press and
hold CLOCK to proceed clock setting as described in step 2 and afterwards.
1
2
3
4
5
6
In standby mode, press and hold CLOCK on the main unit.
Press
9
on the main unit to select 12 hour or 24 hour format.
Turn VOLUME +/- to set the hour.
Press CLOCK to conrm.
The minute digits are displayed and begin to blink.
»
Turn VOLUME +/- to set the minute.
Press CLOCK to conrm.
MCM207_12_QSG_Eng.indd 2 2009-9-24 16:24:46
Play disc
Press CD to select the disc source
.
Press
ç
to open the disc tray.
Insert a disc with the printed side facing up, then close the disc tray.
To pause/resume play, press
ÉÅ
.
To stop play, press
9
.
4
3
2
1
5
1
2
3
Insert the USB device’s USB plug into the socket
on the main unit.
Press USB/MP3 LINK repeatedly to select the USB device source.
Play the USB’s audio les as you do with the albums/tracks on a CD.
Play form USB
With the micro system, you can use USB ash memory (USB 2.0 or USB1.1),
USB ash players
(USB 2.0 or USB1.1)
,
memory cards (requires an additional card reader to
work with this micro system).
MCM207_12_QSG_Eng.indd 3 2009-9-24 16:24:47
C
Royal Philips Electronics N.V. 2009
All rights reserved.
http://www.philips.com
Tip
Detailed playback features and additional functions
are described in the accompany owner's manual.
1
2
3
Press TUNER repeatedly to select FM or MW.
Press PROG for more than two seconds to program all available stations in order of wave-
band.
Press
34
to select a preset number.
Program and tune to radio stations
MCM207_12_QSG_V3.0
MCM207_12_QSG_Eng.indd 4 2009-9-24 16:24:47
/