Raytheon NFU-Tiller, Type 105-107 NG010 Operating instructions
- Type
- Operating instructions
Raytheon Anschütz GmbH
Postfach 1166
D -- 24100 Kiel
Germany
Tel+49--431--3019--0
Fax+49--431--3019--501
Email [email protected]
www.raytheon --anschuetz.de
3238E/105--107.DOC012 Edition: July 19, 2010
NFU Tiller
Type 105 -- 107 NG010
1 Description
2 Technical Data
3 First Putting into Operation
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und
Mitteilung ihres Inhaltes nicht gestattet, soweit nicht ausdrücklich
zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz.
Copying of this document, and giving it to others and the use or
communication of the contents thereof, are forbidden without express
authority. Offenders are liable to the payment of damages.
Toute communication ou reproduction de ce document, toute
exploitation ou communication de son contenu sont interdites, sauf
autorisation expresse. Tout manquement à cette règle est illicite et
expose son auteur au versement de dommages et intérêts.
Sin nuestra expresa autorización, queda terminantemente prohibida la
reproducción total o parcial de este documento, así como su uso
indebido y/o su exhibición o comunicación a terceros. De los infractores
se exigirá el correspondiente resarcimiento de daños y perjuicios.
NFU TILLER
Technical
Documentation
1
3238E/105--107.DOC012Edition: July 19, 2010
1 Description
The tiller -- set into control desks or steering stands -- serves as non--follow--up steering
element on bridges (
NON FOLLOW UP).
By setting the lever to PORT or STBD up to mechanical stop, two sets each of contacts
are activated.
In steering controls with autopilot--override possibility in connection with an override sig-
nal unit, an additional set of contacts can be used as OVERRIDE contact. When the tiller
is activated, the autopilot is deactivated and the steering control is taken over directly
with the tiller. In contrast to the normal NFU tiller, the override contact switches immedi-
ately at the smallest deflection of the lever.
When the non--follow--up steering (NFU) or ’autopilot’ is selected via the steering mode
selector switch, the field ’In Command’ lights up as status indication. The brightness is
regulated automatically.
In Command
Port Stbd
NFU TILLER
2
3238E/105--107.DOC012 Edition: July 19, 2010
2 Technical Data
Dimensions:
Recess and Drilling Scheme
M4 (4x)
Weight: approx. 1 kg
Supply voltage: 24 V
DC
max. wire cross section: 1.5 mm
2
Ty pe of enclosure: IP 23 EN 60529 after installation
IP56 Front--Sided
Ambient temperature (operation): --25 Cto+55C
See also appended Dimensional Drawing:105--107.HP015
NFU TILLER
Technical
Documentation
3
3238E/105--107.DOC012Edition: July 19, 2010
3 First Putting into Operation
12345678
+24V DC
0V
Connection:
L1
Adjustment:
Brightness of background:
Adjust brightness of background with potentiometer R2; be sure to adjust during night
operation (when bridge is dark)!
Circuit Diagram:
+24V
1
2
0V
3
4
C1
4N7
AUTODIM
C3
0U1
DARK--
LIGHT
N1
1N4007
R8
R2
5K
R6
8K25
R1
19K6
N4
BD--139
N2
27V
H1
OVERRIDE
STBD
PORT
PORT
STBD
JOYSTICK
Position of the terminals
at the contact sets
B1 -- B5
1
2
B1
4
1
2
B3
4
1
4
B2
2
1
4
B4
2
1
4
B5
2
4
2
1
For connection see also appended Connection Diagram 105--107.HP019
NFU TILLER
4
3238E/105--107.DOC012 Edition: July 19, 2010
This equipment includes electromechanical devices
such as relays, switches or potentiometers.
Electromechanical devices are subject to wear and
tear depending on operation cycles and environmental
conditions.
A repair is performed as a replacement of the Tiller.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Raytheon NFU-Tiller, Type 105-107 NG010 Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Raytheon Autopilot Override NFU-Tiller, Type 105-302 Operating instructions
-
Raytheon Anschütz Pilotstar D User manual
-
-
-
-
-
-
-
-
Other documents
-
Simrad AP50 User manual
-
-
-
-
-
-
-
-
-