OKI MPS710C Owner's manual

Page is loading ...

2

Using the Printer Menu . . . . 4

Navigating. . . . . . . . . . . . . 4

Menu Summary . . . . . . . . . 5

Print Media Settings . . . . . . . 6

Tray 1 and Optional Trays 2

and 3. . . . . . . . . . . . . . . . . . 8

Usable Print Media . . . . . . . 8

Loading Paper . . . . . . . . . . 9

Multi-Purpose Tray. . . . . . . 10

Usable Print Media . . . . . . .10

Loading Print Media . . . . . .11

Exit Trays . . . . . . . . . . . . . . 12

Power Save Mode . . . . . . . . 13

Clearing Media Jams. . . . . . 14

Troubleshooting . . . . . . . . . 22

Ordering Replacement

Supplies . . . . . . . . . . . . . . 23

Service & Support. . . . . . . . 24

Utilisation des menus

de l'imprimante . . . . . . . 25

Déplacement. . . . . . . . . . . 25

Sommaire des menus. . . . . 26

Paramètres de support

d’impression . . . . . . . . . . . 27

Bacs 1, 2 et 3 optionnel . . . 29

Supports d'impression

utilisables . . . . . . . . . . . . 29

Chargement des supports

d'impression . . . . . . . . . . 30

Bac multifonction . . . . . . . . 31

Supports d'impression

utilisables . . . . . . . . . . . . 31

Chargement des supports

d'impression . . . . . . . . . . 32

Bacs de sortie . . . . . . . . . . . 33

Mode d'économie

d'énergie. . . . . . . . . . . . . . 34

Dégagement des

bourrages . . . . . . . . . . . . . 35

Dépannage . . . . . . . . . . . . . 43

Commande de fournitures .44

Service et support . . . . . . . 45

Contents

Table des matières

59402301

Page is loading ...

4

•

English

Using the Printer Menu

Navigating

Note

Settings made in the printer

driver will override the printer

menu settings.

Navigating the Menu

1. Press

to enter the Menu mode.

2. Press

or

repeatedly to scroll through the

Categories, Items and Values.

3. Press

to select a Category, Item or

Value to change, or to engage

the new setting for a Value.

4. Press

to exit the Menu mode.

For Example

If the MP Tray will normally be

loaded with index cards, set the

printer menu as follows:

1. Press E

NTER

.

2. Press the down arrow key to

move down to

Menus

. Press

E

NTER

3. Press E

NTER

to select

Tray

Configuration

.

4. Press the down arrow key to

move down to

MPTray Config

.

Press E

NTER

.

5. Press the down arrow key to

move down to

Media Type

. Press

E

NTER

.

6. Press the down arrow key to

move down to

Card Stock

. Press

E

NTER

.

An asterisk appears next to

your selection. The setting is

engaged.

Press O

N

L

INE

.

5

•

English

Using the Printer Menu

Menu Summary

Summary of Menu

Categories



Configuration

•Page Count

• Supplies Life

•Network

•System



Print Information



Menus

• Tray Configuration

•MPTray Config



System Adjust



Admin Setup

For use by the System

Administrator. To access this

menu you must enter the

password. If you have no

administrator, the default

password is aaaaaa.



Calibration

Printing the

Configuration Report

The Configuration report provides

a listing of the current printer

menu settings.

1. Press

E

NTER

.

2. Press the down arrow key to

select

Print Information

.

3. Press

E

NTER

.

4. Press E

NTER

to select

Configuration

.

5. Press E

NTER

. to select

Execute

.

The Configuration report prints

and the printer goes back on

line.

6

•

English

Print Media Settings

Always make sure the media setting

matches the print media you are

using.

Improper media settings:

• cause poor quality printing

• cause flaking

• can damage the printer

Note

Printer driver settings override

printer menu settings.

Default Settings

The default media weight setting

for Tray1 is Light.

The default setting for the MP

(Multi Purpose) Tray is Medium.

Resetting to the Defaults

Note

A password is required to

access this area of the printer

menu. If you have a System

Administrator, only they can

reset the defaults.

1. Press E

NTER

.

2. Press the down arrow key to

move down to

Admin Setup

.

Press E

NTER

.

3. Enter the administrative

password (the default

password is aaaaaa).

a. Press the up arrow key (a to

z, 0 to 9) or the down arrow

key (9 to 0, z to a) to scan

through the various

numbers and letters of the

alphabet.

b. Press Enter.

c. Repeat a and b above for

each digit of the password.

4. Press E

NTER

.

5. Press the down arrow key to

move down to

Settings

. Press

E

NTER

.

6. Press E

NTER

to select

Reset

Settings

.

7. Press E

NTER

to select

Execute

.

The printer resets and returns

to the on-line state.

7

•

English

Print Media Settings

Temporarily Changing the

Media Weight for an

Individual Print Job

If you are printing a job on

special media, you can

temporarily load the media in a

tray and change the media

settings for that tray in the driver

as you print the job.

Media Weight Settings

Media weight settings can be

made in the printer menu or the

printer driver.

• Light: 17-19 lb. US Bond

(64-74 g/m²)

• Medium Light: 20-21 lb. US

Bond (75-82 g/m

2

)

• Medium: 22-30 lb. US Bond

(83-104 g/m

2

)

• Heavy: 28-32 lb. US Bond

(105-120 g/m

2

)

• Ultra Heavy1 (Tray 1): 32-50

lb. US Bond (121-188 g/m

2

)

•Ultra Heavy2

-Trays 2 and 3: 3

2-54 lb. US

Bond (121-203 g/m

2

)

-MP Tray: 32-58 lb. US Bond

(189-220 g/m

2

)

8

•

English

Tray 1 and Optional Trays 2 and 3

Usable Print Media

Media Specifications

Weight Range

Tray 1: 17-50 lb. US Bond (64-188 g/m

2

)

Optional Trays 2 and 3: 17-54 l

b. US Bond

(6

4-203 g/m

2

)

Standard Sizes:

Tray 1: Letter, Legal-14, Legal-13.5, Legal-13,

Executive, A4, A5, A6, B5.

Optional Trays 2 and 3: Letter , Legal-14,

Legal-13.5, Legal-13, Executive, A4, A5, B5.

Custom Sizes:

•Min.: 5.5 x 8.3'' (140 x 211 mm)

• Max.: 8.5 x 14'' (216 x 356 mm)

Must be defined in driver before printing: see your

on-line User’s Guide.

Capacity:

530 sheets of 20-lb. (75 g/m

2

) paper

9

•

English

Tray 1 and Optional Trays 2 and 3 (cont.)

Loading Paper

1

2

3

4 Important! Adjust the paper

size dial to the size of the

paper being used.

5

6

7

3

10

•

English

Multi-Purpose Tray

Usable Print Media

Media Specifications

Weight Range

32-58 lb. US Bond (189-220 g/m

2

)

Standard Sizes:

Letter, Legal-14, Legal-13.5, Legal-13, Executive, A4, A5,

A6, B5, Com-10 envelopes.

Custom Sizes:

Min. 3 x 11.7" (76 x 297 mm)

Max. 5" x 14" (127 x 356 mm)

Banners: 8.25 to 11.7" (216 to 297 mm) wide by up to

47.25"'' (1220 mm) long. Must be fed one sheet at a time.

Must be defined in driver before printing: see your on-

line User’s Guide.

Takes:

• 100 sheets 20-lb. (75 g/m

2

) paper

•10 envelopes

• 20 sheets of labels

• 50 transparencies

• Banners, one at a time

11

•

English

Multi-Purpose Tray (cont.)

Loading Print Media

1

2

3

4

5

Letterhead Stationery

• Load face

up

, top edge

into

the printer.

Envelopes

• Load print side up (flap

down) with top edge aimed

into the printer.

3

12

•

English

Exit Trays

Top (Face Down) Exit

Tray

This is the exit tray that is

normally used.

• For papers up to 47 lb. US

Bond (176 g/m

2

).

• Holds up to 250 sheets of

20-lb. US Bond (75 g/m

2

)

paper.

• Sheets exit face down.

Rear (Face Up) Exit Tray

• Provides straight-through,

curl-free print path for

transparencies, envelopes,

labels and heavy paper.

• Handles paper from 17 to 58

lb. US Bond (64 to 220 g/m

2

).

• Holds up to 100 sheets of

20-lb. US Bond (75 g/m

2

)

paper.

• Sheets exit face up (for

multi-page documents, select

reverse order printing in your

application Print dialog box).

Note

If the rear tray is open, all

printed pages will exit there

regardless of the printer driver

setting.

Opening the Rear-Feed Tray

13

•

English

Power Save Mode

Power Save sets how long the

printer waits before going into

standby mode. The default is 5

minutes.

This saves energy, but the printer

requires time to warm up when it

receives a print job or if you want

to enter the menu and change

settings.

For more information, see your

on-line User’s Guide.

14

•

English

Clearing Media Jams

When “Paper Jam” appears on the second line of the display, there is

print media jammed in the printer.

Depending on where the media is jammed, there may be more than one

sheet stuck in the printer.

If one sheet is removed and there are still more sheets in the printer, the initial

message will go away temporarily, then “Paper Jam” will appear again.

Paper Jam Error Message Summary

Error No. Location of Jam Error No. Location of Jam

370

Duplex unit

1

1.Applies only if this option is installed.

382 Paper exit

371 Duplex unit* 383 Duplex unit*

372 Duplex unit* 390 MP Tray

373 Duplex unit* 391 Paper Tray

380 Paper feed 392

2

nd

Paper tray*

381 Paper path 400 Paper size

370

373

382

383

381

372371

391

392

380, 400

390

15

•

English

Clearing Media Jams (cont.)

The box below contains a summary of

the basic process for clearing jams

.

For more details see the pages

which follow.

Lower cover,

but do not latch

16

•

English

Clearing Media Jams (cont.)

1. Open the top cover.

2. If a sheet is well advanced out

of the top of the printer, grip it

and pull gently to draw it fully

out.

Caution

The fuser may be hot! It is clearly

labelled. Do not touch it.

Note the location of the various

color toner cartridges.

1 = Cyan

2 = Magenta

3 = Yellow

4 = Black

Caution!

Do not touch the green image

drum surface or expose it to light

for more than 5 minutes.

17

•

English

Clearing Media Jams (cont.)

3.

Remove all the image

drums/toner cartridges, and

place them on a flat surface.

4.

Cover them to protect them

from light.

5.

Gently remove any jammed

sheet(s).

18

•

English

Clearing Media Jams (cont.)

6.

To remove a sheet just

entering the fuser, separate

the trailing edge of the

sheet from the belt, pull the

fuser pressure release lever

(1) towards the front and

remove the sheet. Then

release the lever.

7. If the sheet is well advanced

into the fuser:

a. Push the two retaining

levers (1) towards the front

of the printer to release the

fuser. Withdraw the fuser

unit using the handle.

b. Press release lever (1) and

pull the trapped paper from

the fuser.

c. Replace the fuser unit and

push the lock levers toward

the rear of the printer.

19

•

English

Clearing Media Jams (cont.)

8. \Replace the image

drums/toners, being careful to

install them in the proper

sequence.

1 = Cyan

2 = Magenta

3 = Yellow

4 = Black

9.

Lower the printer cover to

protect the image drums

from light, but do not latch

it.

10.Open the rear exit tray and

pull out any sheets found in

this area.

For printers equipped with

the optional duplexer:

Open the duplex unit cover

and remove any sheets.

Close the duplex unit cover.

20

•

English

Clearing Media Jams (cont.)

11.

Lift the front cover release

and open the front cover.

12.

Remove any jammed paper.

13.

Close the front cover.

14.

Pull out the paper tray and

remove any jammed paper.

15.

Close the tray.

21

•

English

Clearing Media Jams (cont.)

16.

Press down on the printer

cover to latch it.

For printers equipped with

the optional second paper tray:

Pull out the second paper tray

and remove any jammed

paper.

Close the tray.

22

•

English

Troubleshooting

The Help Key

Your printer has a built-in help

system.

When an error message appears

on the display, press HELP. The

display shows information that

will help you correct the error,

including clearing paper jams.

Use the O

N

L

INE

key to move

through the Help information.

For more information on clearing

paper jams, see pages 14, ff.

Page is loading ...

OKI MPS710C Owner's manual

OKI MPS710C Owner's manual

in other languages

Related papers

Other documents