Harbor Freight Tools 95332 Assembly And Operating Instructions Manual

Brand: Harbor Freight Tools

Model: 95332

Type: Assembly And Operating Instructions Manual

This manual is also suitable for

Harbor Freight Tools 95332 is a Curved Chisel Sharpening Jig used for sharpening curved chisels, scrapers, barrel scrapers, drawing knives, and screwdrivers. This heavy-duty jig is made of 12-gauge formed steel plate, ensuring durability and stability during use. It features fully adjustable tool holders and locking knobs, allowing you to securely position your tool at the desired angle. The jig is compatible with various curved chisels and other compatible tools, making it a versatile sharpening solution for your woodworking projects.

Woodworking Tool

Sharpening Jigs

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Due to continuing improvements, actual product may differ slightly from the product described herein.

Models 95329, 95331, 95332, 95333 and 95334

To prevent serious injury, read and understand all warnings and instructions before use.

(Grinder Sold Separately)

SKU 95329, 95331, 95332, 95333 and 95334

Page 2

noitcurtsnoC

htiwleetSdetalpcniZ

redlohlooTmunimulA

rofdengiseD

wolloHdnagninruThguoR

slooTgnittuC

serutaeFe

lbatsujdaylluFnoisnemiDredloHlooTW"61/51x.aiD"8/1-3

noisnemiDtekcarBH"8/3-1xW"8/7-3xL"61/11-2eziSdaerhT

mm5

2.1:bonKgnitsujdA

mm57.1:bonKgninethgiT

elgnAelbatsujdA°54-°0thgieWteN.sbl1.1

Specifications

:noitcurtsnoC

htiwleetSdemroF

tnuoMrofgnihsuBenerytsyloP

:rofdengiseD

wolloHdnagnittuChguoR

slooTgninruT

oisnemiDtekcarBH"¼-2xW"61/51-1xL"2:noisnemiDraBgnikcoLL"8/1-4x.aiD"½

:noisnemiDtekcarBgnikcoLH"1xW"61/5-1x

L"¾-2:thgieWteN.sbl52.1

95329 Woodworking Chisel Jig:

95331 Scissor Sharpening Jig:

95332 Curved Chisel Sharpening Jig:

95333 Rough Chisel Sharpening Jig:

95334 Axe Sharpening Jig:

noitcurtsnoC

htiwleetSdetalpcniZ

sbonKtnemtsujdA

rofdengiseDsrossicS

serutaeFelbatsujdaylluFnoisnemiDllarevOH

"61/31-2xW"8/7-11xL"4

snoisnemiDllewoD)2YTQ(L"8/7-11x.aiD"2/1eziSdaerhT)2ytq(mm0.1

snoisnemiDpmalCH"¼xH"61/

5-2xW"¾-2thgieWteN.sbl8.2

noitcurtsnoC

htiwetalPleetSdemroF.aG21

sbonKtnemtsujdA

rofdengiseDslesihCdevruC

serutaeFelbatsujdaylluFnoisn

emiDgnisuoHH"½-2xW"¼-4xL"8/1-2

snoisnemiDbonKL"4/1-1x.aiD"61/5-1bonKgnikcoL)2.YTQ(daerhTmm0.1

looTlanoitidd

ytilibitapmoC

,sreparcSlerraB,sreparcS

srevirdwercSdnasevinKgniwarD

thgieWteN.sbl58.0

:noitcurtsnoC

etalPleetSdetalPcniZ

gnihsuBenerytsyloPhtiw

:rofdengiseDexA

:retemaiDgnihsuBretemaiD"764.

gnin

epOeloHgnitnuoM

:noisnemiD

.aiD"8/1-3

:noisnemiDllarevOH"¾-2xW"8/3-2xL"¼-3:thgieWteN.sbl53.0

Save This Manual

You will need the manual for the safety warnings and precautions, assembly

instructions, operating and maintenance procedures, parts list and diagram. Keep

your invoice with this manual. Write the invoice number on the inside of the front

cover. Keep the manual and invoice in a safe and dry place for future reference.

SKU 95329, 95331, 95332, 95333 and 95334

Page 3

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed

to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or power tools in

damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not

use electrically powered tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do

not let them handle machines, tools, or extension cords.

4. Store idle equipment. When not in use, tools must be stored in a dry

location to inhibit rust. Always lock up tools and keep out of reach of children.

5. Use the right tool for the job. Do not attempt to force a small tool or

attachment to do the work of a larger industrial tool. There are certain

applications for which this tool was designed. It will do the job better

and more safely at the rate for which it was intended. Do not modify this

tool and do not use this tool for a purpose for which it was not intended.

6. Dress properly. Do not wear loose clothing or jewelry as they can be caught

in moving parts. Protective, electrically non-conductive clothes and non-skid

footwear are recommended when working. Wear restrictive hair covering to

contain long hair. Wear work gloves to protect hands.

7. Use eye and ear protection. Always wear ANSI approved impact safety

goggles when working. Wear a full face shield if you are producing metal

filings. Wear an ANSI approved dust mask or respirator when working around

metal, wood, and chemical dusts and mists.

8. Do not overreach. Keep proper footing and balance at all times. Do not

reach over or across running machines.

9. Maintain tools with care. Keep tools maintained and clean for better and

safer performance. Follow instructions for lubricating and changing

accessories. The handles must be kept clean, dry, and free from oil and

grease at all times.

10. Stay alert. Watch what you are doing, use common sense. Do not operate

any tool when you are tired.

11. Check for damaged parts. Before using any tool, any part that appears

damaged should be carefully checked to determine that it will operate properly

SKU 95329, 95331, 95332, 95333 and 95334

Page 4

and perform its intended function. Check for alignment and binding of moving

parts; any broken parts or mounting fixtures; and any other condition that may

affect proper operation. Any part that is damaged should be properly repaired

or replaced by a qualified technician.

12. Replacement parts and accessories. When servicing, use only identical

replacement parts. Use of any other parts will void the warranty. Only use

accessories intended for use with this tool. Approved accessories are

available from Harbor Freight Tools.

13. Do not operate tool if under the influence of alcohol or drugs. Read

warning labels on prescriptions to determine if your judgment or reflexes are

impaired while taking drugs. If there is any doubt, do not operate the tool.

14. Maintenance. For your safety, service and maintenance should be performed

regularly by a qualified technician.

Specific Safety Warnings

1. These tools are designed to hold wood cutting tools or scissors in the proper

position for sharpening on an appropriate grinder. Do not attempt to use these

tools for any other purpose. You may damage the tool, and/or cause serious

personal injry.

2. Do not attempt to sharpen brittle materials, such as glass or hard plastic.

Those materials may shatter and potentially cause injury. Always wear ANSI

approved safety goggles and face shield when using any one of these tools.

3. As your tool is being sharpened, there is a significant pinch hazard created.

Keep hands, fingers, hair or clothing or any item which may be injured or

damaged away from the sharpening jig and grinder when in operation.

Warning: The warnings, cautions, and instructions discussed in this instruction

manual cannot cover all possible conditions and situations that may occur. It

must be understood by the operator that common sense and caution are factors

which cannot be built into this product, but must be supplied by the operator.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and

other construction activites, contain chemicals known [to the State of California] to

cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are: A) Lead from lead-based paints; B) Crystalline cilica from bricks and

cement or other masonry products; C) Arsenic and chromium from chemically treated

lumber. Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that are

specially designed to filter out microscopic particles. (California Health & Safety Code

§ 25249.5, et seq.)

SKU 95329, 95331, 95332, 95333 and 95334

Page 5

Unpacking

When unpacking, check to make sure that all parts are included and

undamaged. Contact Harbor Freight Tools at 800-444-

3353 if any parts are missing or damaged.

95329 Woodworking Chisel Jig:

Steel Bracket with Tool Holder and (2) Adjusting

Knobs

Refer to page 8 for complete parts list.

95331 Scissor Sharpening Jig:

(2) Steel Brackets with Tool Holders, Backing Plate,

Scissor Blade Holder and (2) Adjusting Knobs

Refer to page 9 for complete parts list.

95332 Rough Turning and Hollow Cutting Tool

Sharpening Jig:

Backing Plate and (2) Adjusting Knobs

Refer to page 10 for complete parts list.

95333 Rough Turning and Hollow Cutting Tool

Sharpening Jig:

Adjustable Tool Holder, Bracket Mount, (3) Stop

Rings and Allen Key

Refer to page 11 for complete parts list.

95334 Axe Sharpening Jig:

Adjustable Tool Holder

Refer to page 12 for complete parts list.

SKU 95329, 95331, 95332, 95333 and 95334

Page 6

Overview

These tools are designed to be used with a slow speed wet grinder (not included).

Harbor Freight Tools 8” Wet Grinder item number 95236 is used in the photos as an

example. The Standard Bracket Unit discussed on page 7 and shown in several

photos is included with item 95236. These jigs will hold your wood, cloth or leather

cutting tools in position while being sharpened on a grinder.

Wood Cutting Tool or Scissor Sharpening Tips

1. Preserve the correct angle. The cutting angle is the angle of the cutting

edge to the face of the tool. The best angle for each tool depends on the tool

and the material being cut. In most cases, it is best to reproduce the angle

originally supplied by the manufacturer on your tool.

2. Preserve the edge shape. Each cutting tool has a unique edge shape best

suited for its purpose. It may be curved, straight, beveled or other. When

sharpening, be careful to retain the edge shape of the tool.

3. Do not overheat. Use a wet, low speed grinder to sharpen tools. A high

speed grinder will heat up the cutting edge of the tool, removing the hardness

of the edge. A soft edge will not remain sharp for long and will not cut properly.

4. Burnish or hone the edge after grinding. Grinding produces an

approximately correct cutting edge. Some burrs or scratches will always

remain on the cutting edge after grinding. For best results, take the time to

hone (using a sharpening stone) or burnish (using a hardened steel honing

tool) the edge before beginning work.

5. Protect the edge from damage. The sharpened edge is extremely thin,

sharp and subject to damage. Store your cutting tools with care to prevent

damage to the edge from banging against other objects or from corrosion.

6. Touch up the edge periodically. Occasionally touch up the cutting edge of

your tools with a honing stone or burnisher. This will keep your tools sharp and

ready for use, and will result in less wear to the cutting tool than repeated

grinding.

7. Grinding wheel direction. In most cases with chisels, knives and scissors,

position the tool so the grinding wheel will turn from the base of the tool toward

the edge of the tool. With axes and blunt tools, have the grinding wheel rotate

from the cutting edge toward the base of the tool.

8. Inner curve gouges. In this manual, most instructions are given based on the

beveled edge of the tool being on the outside. In some cases, the beveled

edge of a gouge is on the inner or concave part of the cutting edge. With tools

of this type, a special profiled grinding wheel is required for sharpening.

SKU 95329, 95331, 95332, 95333 and 95334

Page 7

Assembly and Operation

Each of these jigs are designed to be fixed to the grinder (not included) using

a standard bracket unit. The bracket shown is included with Harbor Freight

Tools 8” Wet Grinder #95236 and is

used for reference. This bracket and

grinder are not included with these jigs.

Any similar bracket may be used. A

wet, low speed grinder like HFT item

#95236 is recommended for best

results. Please see item 3 on page 6 of

this manual for details.

Standard Bracket Unit:

1. Assemble the two Bracket Supports to

the Bracket Crosspiece using the two

bolts supplied. Tighten securely.

2. Attach the mounting Brackets to the wet

grinder as shown in the photo above.

If not using #95236 8” Wet Grinder, outfit your

grinder with a similar bracket set up.

Item # 95329 Device for Rough Turning and

Hollow Cutting Tools:

1. Insert the chisel or other tool (not included) into

the Support Unit as shown in picture above right.

2. Rotate the tool Bed into the desired position.

Tighten the Screw to fix the Tool Bed into place.

3. Tighten the chisel in place using the Upper

Locking Knob, and the Side Locking Knob.

4. Place the Support Unit on the Standard

Bracket Unit as shown in photo at above right.

5. Check the position of the chisel on the grinding

wheel before beginning grinding.

6. When the chisel is positioned properly, turn on

the grinding wheel (not included)

7. Slowly rotate the chisel cutting edge on the grinding

wheel until the desired edge has been created.

8. Remove the assembly from the grinding wheel, and turn the grinding wheel off.

Remove the chisel from the Support Unit.

Standard Bracket Unit

SKU 95329, 95331, 95332, 95333 and 95334

Page 8

1. In addition to grinding rounded chisels freehand as discussed on the previous

page, item #95329 may be used to grind beveled chisels at a preset angle.

2. For grinding beveled flat chisels, assemble this jig as shown in illustration

above left.

3. The bevel angle can be set by rotating the Locking Ring (1) on the Support (7).

Read the angle on the scale stamped in the Support. Lock the angle in place

by tightening the Countersunk Screw (6).

4. Insert the chisel and lock in place tightening the Milled Screw (4).

5. Slide the Support (7) and the assembly onto the standard bracket. Adjust to

the grinding wheel and sharpen the chisel by lightly touching it to the grinding

wheel.

6. When sharpened, turn the grinder off, and remove the chisel from the jig.

Item 95329 with Angle Support

Item 95329 Parts List

SKU 95329, 95331, 95332, 95333 and 95334

Page 9

1. Assemble the Scissors sharpening

device as shown in the assembly

diagram at the bottom of this page.

2. Mount the assembled device on a

standard bracket unit as in the

illustration at right.

3. Mount your scissors (not included)

in the device as shown in the

illustration at right. The inner face

of the scissor blade should be

against the Backing Plate (2) and

the outer face of the blade should

be against the Scissors Support

(1). Please refer to the illustration.

4. Adjust the device so the cutting edge of the scissor blade lightly rests on the

grinding wheel. Adjust the position of the scissor blade, so when moved

sideways, it will lightly move along the surface of the grinding wheel.

NOTE: The goal of sharpening scissors is to create a cutting edge at

approximately 90° to the flat inner surface of the scissor blade. The cutting

edge will be very slightly hollowed (4” radius) based in the diameter of the

grinding wheel.

5. Turn on the grinding wheel. Slide the scissor blade across the grinding wheel

to sharpen its full length. Repeat as necessary. Turn the grinding wheel OFF

when finished.

6. Repeat this process with the other blade.

7. Shut off and disconnect from electric supply when finished.

Item 95331 Parts List

Item 95331 Device for Scissors:

SKU 95329, 95331, 95332, 95333 and 95334

Page 10

Item 95332 Universal Jig for Scrapers, Barrel Scrapers, Curved Drawing

Knives and Screw Drivers:

1. This device is for “freehand”

sharpening of a large variety of

tools. It provides a stable platform

to hold the tool against the

grinding wheel, but does not

restrict the angle or bevel which is

hand applied.

2. Slide the Platform onto the

standard mounting bracket or any

similar bracket.

3. Adjust the position of the jig as

needed for your sharpening task.

4. Insert the two threaded knobs in the threaded holes in the platform. Adjust the

angle of the Platform as desired and fix in place by tightening the knobs.

5. Turn the grinder on. Lightly touch the tool on the grinder to sharpen.

6. When the tool is sharp, remove it from the grinder and turn the grinder off.

#traPnoitpircseD.YTQ

1mroftalP1

2sbonKgnikcoL2

3gnihsuB2

Item 95332 Parts List

SKU 95329, 95331, 95332, 95333 and 95334

Page 11

This jig is for sharpening spoon gouges and similar rounded chisels.

1. Slide the Mounting Bracket (2) on the Standard Mounting Bracket on your

grinder.

2. Mount your spoon chisel or similar tool in the Adjustable Clamp Assembly (1).

Tighten securely using the Tightening Knob.

3. If desired, place a bushing on the rod portion of the Adjustable Clamp

Assembly. The Bushings will limit the movement of the rod in the Mounting

Bracket during the sharpening process. This can help you sharpen more

precisely.

4. Insert the rod of the clamp

assembly into the Mounting

Bracket. If desired, another

Bushing (3) can be attached to the

rod.

5. Adjust the jig so the tool rests

lightly on the grinding wheel.

6. Turn the grinder on. Lightly touch

the tool on the grinder to sharpen.

7. You can rotate your tool on the grinding wheel by turning the rod in the

Mounting Bracket.

8. When the tool is sharp, remove it from the grinder and turn the grinder off.

Item 95333 Jig for Rough Turning and Hollow Cutting Tools:

#traPnoitpircseD.YTQ

1ylbmessApmalCelbatsujdA1

2tekcarBgnitnuoM1

3sgnihsuB3

4yeKnellA1

Item 95333 Parts List

SKU 95329, 95331, 95332, 95333 and 95334

Page 12

Item 95334 Jig for Sharpening Axes:

This jig is for hatchets, axes and similar tools.

1. Slide the Mounting Bracket on the

Standard Mounting Bracket on

your grinder.

2. Position your tool Mounting

Bracket as shown in the

illustration at right.

3. Adjust the jig so the tool rests

lightly on the grinding wheel. The

rotation direction of the grinding

wheel should be toward the tool

edge.

4. Turn the grinder on. Lightly touch

the tool on the grinder to sharpen.

5. Press the tool handle forward and

back to rotate the tool edge on the

grinding wheel as indicated by the arrows in the illustration. Always face tool

blade away from your body.

6. When the tool is sharp, remove it from the grinder and turn the grinder off.

#traPnoitpircseD.YTQ

1tekcarBgnitnuoM1

2gnihsuB2

Item 95334 Parts List

SKU 95329, 95331, 95332, 95333 and 95334

Page 13

Maintenance

1. Periodically inspect each tool for loose bolts, bent or damaged components.

2. Regularly wipe down and clean each tool to keep it in best condition.

3. Occasionally tighten the many hinge points of each tool.

4. When not in use, store this tool in a dry place, protecting it from wet or

corrosive atmosphere. Protect this tool from accidental damage by placing it

in a storage area away from other work or traffic.

NOTE: Some parts are listed and shown for illustration purposes only. Individual

replacement parts are not available.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM

IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR

DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE

BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR

THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT,

THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS

AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK

AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT

OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION

OF REPLACEMENT PARTS THERETO.

Harbor Freight Tools 95332 Assembly And Operating Instructions Manual

Brand: Harbor Freight Tools

Model: 95332

Type: Assembly And Operating Instructions Manual

This manual is also suitable for

Download PDF

report

Harbor Freight Tools 95332 Assembly And Operating Instructions Manual

This manual is also suitable for

Harbor Freight Tools 95332 Assembly And Operating Instructions Manual

Related papers

Other documents