Tyan Tank GT14 B5180 User manual

Tank™ GT14

B5180

Service Engineer’s Manual

PREFACE

Copyright

This publication, including all photographs, illustrations, and

software, is protected under international copyright laws, with

contained herein, may be reproduced without written consent

of manufacturer.

Version 2.00

Disclaimer

Information contained in this document is furnished by TYAN

Computer Corporation and has been reviewed for accuracy and

reliability prior to printing. TYAN assumes no liability whatsoever,

and disclaims any express or implied warranty, relating to sale

and/or use of TYAN products including liability or warranties

relating to fitness for a particular purpose or merchantability.

TYAN retains the right to make changes to product descriptions

and/or specifications at any time, without notice. In no event will

TYAN be held liable for any direct or indirect, incidental or

consequential damage, loss of use, loss of data or other malady

resulting from errors or inaccuracies of information contained in

this document.

Trademark Recognition

All registered and unregistered trademarks and company

names contained in this manual are property of their respective

owners including, but not limited to the following.

TYAN and Tank™GT14 B5180 are trademarks of TYAN

Computer Corporation.

Intel, Pentium 4, Pentium D, Core 2 Duo, and combinations

thereof are trademarks of Intel Corporation.

Award, Phoenix, PhoenixBIOS, and combinations thereof are

trademarks of Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe

Corporation.

i

Federal Communication Commission (FCC)

Notice for the USA Compliance Information

Statement (Declaration of Conformity Procedure) DoC

FCC Part 15: This device complies with part 15 of the

FCC Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference;

2) This device must accept any interference received including

interference that may cause undesired operation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try one or

more of the following measures:

– Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment and the

receiver.

–

Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio

interference as specified in the Canadian Department of

Communications Radio Interference Regulations. (Cet appareil

est conforme aux norms de Classe B d’interference radio tel que

specifie par le Ministere Canadien des Communications dans

les reglements d’ineteference radio.)

Notice for Europe (CE Mark)

This product is in conformity with the Council

Directive 89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not

puncture, mutilate, or dispose of battery in fire. Danger of

explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by manufacturer.

Dispose of used battery according to manufacturer instructions

and in accordance with your local regulations.

ii

About this Manual

This manual provides you with instructions on installing your

Tank™GT14. This Manual is intended for experienced users

and integrators with hardware knowledge of personal

computers.

This manual consists of the following parts:

Chapter1:

Provides an introduction to the GT14

B5180 barebones, packing list, describes

the external components, gives a table of

key components, and provides block

diagrams of the system.

Chapter2:

Covers procedures on installing the CPU,

memory modules, a PCI Express card and

hard drives. Rack mounting information is

also provided in this chapter.

Chapter3:

Covers removal and replacement

procedures for pre-installed components.

Chapter 4:

Covers the contents of system BIOS.

Appendix I:

Listing the cable connection tables for

reference of system setup.

Appendix II:

Covers procedures on installing the SMDC

Card

.

Appendix III:

Covers procedures on installing M2061

PCI-X Riser Card

.

Appendix IV:

Covers instruction on detaching the LAN

cable

.

Appendix V:

Covers instruction on assembling the fan

holders

.

iii

SAFETY INFORMATION

Before installing and using the Tank™GT14, take note of the

following precautions:

–

Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or

stand.

–

Do not block the slots and opening on the unit, which are

provided for ventilation.

–

Only use the power source indicated on the marking

label. If you are not sure, contact the power company.

–

The unit uses a three-wire ground cable, which is

equipped with a third pin to ground the unit and prevent

electric shock. Do not defeat the purpose of this pin. If you

outlet does not support this kind of plug, contact your

electrician to replace your obsolete outlet.

–

Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

–

Follow all warnings and cautions in this manual and on

the unit case.

–

Do not push objects in the ventilation slots as they may

touch high voltage components and result in shock and

damage to the components.

–

When replacing parts, ensure that you use parts specified

by the manufacturer.

–

When service or repairs have been done, perform routine

safety checks to verify that the system is operating

correctly.

–

Avoid using the system near water, in direct sunlight, or

near a heating device.

– Cover the unit when not in use.

WARNING

- Energized and Moving Parts Inside.

- Disconnect Power to the Equipment Before Removing

the Enclosure.

- Replace and Secure the Enclosure Before

Re-energizing the Equipment.

iv

Table of Contents

Chapter 1: Overview

1.1 About the Tank™ GT14 B5180…………………….……...…….………….

1

1.2 Product Models…………………..……………………….……….................

1

1.3 Features………………………………………………………………………

2

1.4 Unpacking………………………………….……..……….............................

8

1.5 About the Product……….………………………..…….................................

11

1.5.1 System Front View………………………..…………………………. 11

1.5.2 System Rear View………………………………................................ 11

1.5.3 LED Definition……………………………………………………..... 13

1.5.4 Internal View……………………………………………………….... 14

1.5.5 Motherboard Layout………………………......................................... 16

1.5.6 Jumpers & Connectors…………………………………..................... 17

1.5.7 System Block Diagram……................................................................. 23

1.5.8 FRU List....……………...……............................................................. 24

Chapter 2: Setting Up

2.0.1 Before You Begin………..…………………………...........................

27

2.0.2 Work Area……………………………………………………............

27

2.0.3 Tools …………….……………………...............................................

27

2.0.4 Precautions …………………………………………………..............

28

2.1 Installing Motherboard Components...………………..……..........................

29

2.1.1 Removing the Chassis Cover………………………………............... 29

2.1.2 Installing the CPU and Heatsink…………………………………….. 30

2.1.3 Installing the Memory……………..………………………………… 32

2.1.4 Installing the PCI-E Card……………................................................. 33

2.1.5 Installing the Hard Drive…………………………………………….. 35

2.2 Rack Mounting………………………………………………………………. 42

2.2.1 Installing the Server in a Rack (with Rail Kit A)……………………. 43

2.2.2 Installing the Server in an Open Rack (with Rail Kit B)…………….. 48

2.2.3 Rack Mount Instructions…………………………………………….. 51

2.3 LCD Software Setup...………………………………………………………. 52

2.3.1 Configuring the System………………..……….……………………. 52

2.3.2 M1000 Driver Installation for Windows……….……………………. 52

2.3.3 M1000 Driver Installation for Linux…..……….……………………. 52

2.4 LCD Console………..………………………………………………………. 53

2.4.1 Key Definition……………………………………………………….. 53

2.4.2 DOS Mode and Windows Mode…………………………………….. 54

2.4.3 Linux Mode………………………………………………………….. 57

Chapter 3: Replacing Pre-Installed Components

3.1 Introduction…………………………………………………………………..

59

3.1.1 Work Area…………………………………………………................ 59

3.1.2 Tools………………………………………….………........................ 59

3.1.3 Precautions……………………………………………………........... 60

3.2 Disassembly Flowchart…………………………..…………………………..

61

v

3.3 Removing the Top Chassis Cover……………………..…….…………….....

62

3.4 Replacing Motherboard Components……………..…………………………

63

3.4.1 Disconnecting All Motherboard Cables………………....................... 63

3.4.2 Removing the Motherboard………………………………………….. 64

3.5 Replacing the LCD Module and LED Board….……......................................

65

3.5.1 M1017 LED Board Features………………………............................ 68

3.5.2 M1007 LED Board Connector Pin Definition………………………. 68

3.6 Replacing the USB Board…………………………………………………… 69

3.6.1 USB Board Features………………..……………………………….. 70

3.6.2 USB Board Connector Pin Header………………..……..………….. 70

3.7 Replacing the Cooling Fans………..…….......................................................

71

3.8 Replacing the Power Supply……..…………..................................................

72

Chapter 4: BIOS Setup

4.1 Main BIOS Setup………………………………………………………...…..

77

4.2 Standard CMOS Features………....……………………………………...…..

79

4.2.1 Phoenix – AwardBIOS CMOS Setup Utility…….………….………. 81

4.3 Advanced BIOS Features……………………………………………………. 82

4.3.1 CPU Features………………………………………………………… 85

4.3.2 Hard Disk Boot Priority……………………………………………... 86

4.4 Advanced Chipset Features.…………………………………………………. 87

4.5 Integrated Peripherals……………………...………………………………... 88

4.5.1 OnChip IDE Device…………………………………………………. 89

4.5.2 Phoenix - AwardBIOS CMOS Setup Utility………………………... 90

4.5.3 Super I/O Device……………..……………………………………… 92

4.6 Power Management Setup…..……………………………………………….

93

4.7 PnP/PCI Configurations……………………….…………….………………. 96

4.8 PC Health Status…………..………………..……………………….............. 97

4.8.1 AutoFAN Control……………...…………………………….............. 99

4.9 Frequency/Voltage Control………...…..……………………………………. 100

4.10 Load Fail-State Default……………………………………………………..

101

4.11 Load Optimized Default….…………….…………………………………...

101

4.12 Supervisor/User Password Setting………………….………………………

102

4.13 Exit Selection……………………………………………………………….

103

Appendix I: Cable Connection Tables

Appendix II: Installing the SMDC Card

Appendix III: Installing the M2061 Riser Card

Appendix IV: Detaching LAN cable

Appendix V: Assembling fan holders

vi

Chapter 1: Overview

1.1 About the Tank™ GT14 B5180

Congratulations on your purchase of the TYAN Tank™

GT14 B5180, a highly-optimized rack-mountable

barebone system. The Tank™ GT14 B5180 is

designed to support single Intel® Pentium® 4,

Pentium® D and Core 2 Duo processors and

maximum 4GB memory, providing a rich feature set

and incredible performance. Leveraging advanced

technology from Intel, the Tank™ GT14 B5180 server

system is capable of offering scalable 32 and 64-bit

computing, high-bandwidth memory design, and

lightning-fast PCI-E slot implementation. The Tank™

GT14 B5180 not only empowers your company in

today’s demanding IT environment but also offers a

smooth path for future application usage.

TYAN is also proud to deliver the Tank™ GT14 B5180

in SATAII flavor while supporting up to three (3) hard

drives. The Tank™ GT14 B5180 uses TYAN’s latest

chassis featuring a robust structure and a solid

mechanical enclosure. All of these provide the Tank™

GT14 B5180 the power and flexibility to meet the

needs of nearly any server application.

1.2 Product Models

Model HDD Bays

Hot-Swap

Supported

B5180G14S3M

Internal, (3)

HDDs

No

B5180G14S3M-QT

Internal, (3)

HDDs

No

Chapter 1: Overview

1

1.3 Features

Tank GT14 (B5180G14S3M)

Form Factor 1U Rackmount

Chassis Name GT14

Dimension (D x W

x H)

w/ bezel 15.5" x 17.2" x 1.7" (394 x

436x43.6mm); w/o bezel 14.4" x 17.2" x

1.7"(365 x 436 x 43.6mm)

Motherboard S5180G2N-BB

System

Gross Weight 16 kg

Buttons (1) PWR / (1) ID

LEDs

(1) PWR / (1) HDD / (2) LAN / (1) ID / (1)

Warning

I/O Ports (2) USB

Front Panel

LCM Yes

Type / QTY

(2) 3.5" + (1) 2.5" / (1) 3.5" + (3) 2.5"

(optional) / (2) 3.5" + (2) 2.5" (optional, w/

o PCI-E support)

Internal Drive

Bay

Supported HDD

Interface

SATAII

FAN (3) 4cm fans

System Cooling

Configuration

Air Duct (1) Air duct

Type EPS12V

Input Range Full-range AC(100-240V)

Frequency 60 Hertz

Power Supply

Output Watts 300 Watts

Supported CPU

Series

Intel Pentium 4, Pentium D and Core 2

Duo processors: CedarMill / Presler /

Conroe

Socket Type / QTY LGA775 / (1)

Processor

System Bus (MHz) 533/800/1066

MCH / ICH Intel Q965 / ICH8

Chipset

Super I/O SMSC SCH5027

Supported DIMM

Qty

(2) DIMM sockets

DIMM Type / Speed

Unbuffered Non-ECC DDR2 /

800/667/533

Capacity Up to 4GB

Memory channel 2-Channel

Memory

Memory voltage 1.5V

PCI-E (1) PCI-E x16 slot

Expansion Slots

Pre-install TYAN

Riser Card

M2083-RS, PCI-E x16 1U riser card (left)

Port QTY (2)

LAN

Controller Intel 82573V

2

Chapter 1: Overview

Connector type D-Sub 15pin

Resolution 2048x1536

Graphic

Chipset Intel Q965

USB 4 ports

COM 1 port

PS/2 1 connector

VGA 1 port

I/O Ports

RJ-45 2 ports

Chipset SMSC SCH5027 and EMC6D103

Voltage

Monitors voltage for CPU, memory,

chipset & power supply

Temperature

Monitors temperature for CPU & system

environment

LED

Fan fail LED indicator / Over temperature

warning indicator

System

Monitoring

Others Watch Dog Timer support

Optional SMDC

M3291 IPMI 2.0 remote system

management card

Server

Management

M3291 Feature

Renesas H8S2167 Baseboard

Management Controller (BMC) /

Supports remote power on/off and reset

(IPMI over LAN) / Shared management

NIC / Properitary card interface (2 x 25pin

header)

Brand / ROM size Award / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0

/

SMBIOS2.3 /PXE Boot / ACPI 2.0 power

management /Power on mode after

power recovery / User-configurable H/W

monitoring / Multiple boot options

Operation

System

OS supported list Please refer to our OS supported list.

FCC (Doc) Class B

Regulation

CE (Doc) Yes

Operating Temp 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS

RoHS 6/6

Complaint

Yes

Motherboard (1) S5180G2N-BB

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

Chassis Unit (1) CCHA-0240, GT14 1U chassis unit

Package

Contains

Cover (1) CCCV-0110, Top cover for GT14

Chapter 1: Overview

3

HDD Tray

(1) CHDT-0111, Internal 2.5" HDD

bracket / (1) CHDT-0120, Internal 3.5"

HDD bracket - L / (1) CHDT-0121,

Internal 3.5" HDD bracket - R

Heatsink / Cooler

(2) CFAN-0310, 4 cm fans / (1)

CFAN-0270, 4 cm fan / (1) CHSK-0131,

LGA775 CPU heatsink / (1) CADT-0190,

air duct

Mounting Ear (1) CEAR-0120, mounting ear kit

Riser Card (1) M2083-RS, PCI-E x16 riser card

Front Panel board

(1) M1017, front panel board / (1)

CPCA-0400, front panel USB board

Power Supply (1) CPSU-0300, 300W 1U single PSU

SATA

(1) CCBL-0328, SATA signal cable,

150mm / (1) CCBL-0329, SATA signal

cable, 200mm / (1) CCBL-032A, SATA

signal cable, 300mm

USB (1) CCBL-0352, USB cable, 350mm

Front Panel

(1) CCBL-0727, front panel cable,

500mm

Package

Contains

Cable

Power Cord

(1) CCBL-0310, US type power cord / (1)

CCBL-0300, EU type power cord

SMDC IPMI Card M3291

Rack Mounting

Part

(1) CRAL-0110, GT14 Standard Rail kit

for 4-Post / (1) CBRK-0030, GT14 Open

Rail for 2-Post / (1) CRAL-0111, GT14

Dual Rail for 4-Post w/ 2 barebones

Optional

accessories for

future upgrade

Riser Card

M2061, PCI-E x8 to PCI-X 1U riser card

(left)

Tank GT14 (B5180G14S3M-QT)

Form Factor 1U Rackmount

Chassis Name GT14

Dimension (D x W

x H)

w/ bezel 15.5" x 17.2" x 1.7" (394 x

436x43.6mm); w/o bezel 14.4" x 17.2" x

1.7"(365 x 436 x 43.6mm)

Motherboard S5180G2N-BB

System

Gross Weight 16 kg

Buttons (1) PWR / (1) ID

LEDs

(1) PWR / (1) HDD / (2) LAN / (1) ID / (1)

Warning

I/O Ports (2) USB

Front Panel

LCM Yes

Internal Drive

Bay

Type / QTY

(2) 3.5" + (1) 2.5" / (1) 3.5" + (3) 2.5"

(optional) / (2) 3.5" + (2) 2.5" (optional, w/

o PCI-E support)

4

Chapter 1: Overview

Internal Drive

Bay

Supported HDD

Interface

SATAII

FAN (3) 4cm fans

System Cooling

Configuration

Air Duct (1) Air duct

Type EPS12V

Input Range Full-range AC(100-240V)

Frequency 60 Hertz

Output Watts 250 Watts

Power Supply

Efficiency 80-plus

Supported CPU

Series

Intel Pentium 4, Pentium D and Core 2 Duo

processors: CedarMill / Presler / Conroe/

B5180G14S3M-QT can’t support Pentium

D Smithfield 8xx series and Presler series

Socket Type / QTY LGA775 / (1)

Processor

System Bus (MHz) 533/800/1066

MCH / ICH Intel Q965 / ICH8

Chipset

Super I/O SMSC SCH5027

Supported DIMM

Qty

(2) DIMM sockets

DIMM Type /

Speed

Unbuffered Non-ECC DDR2 / 800/667/533

Capacity Up to 4GB

Memory channel 2-Channel

Memory

Memory voltage 1.5V

PCI-E (1) PCI-E x16 slot

Expansion

Slots

Pre-install TYAN

Riser Card

M2083-RS, PCI-E x16 1U riser card (left)

Port QTY (2)

LAN

Controller Intel 82573V

Connector type D-Sub 15pin

Resolution 2048x1536

Graphic

Chipset Intel Q965

USB 4 ports

COM 1 port

PS/2 1 connector

VGA 1 port

I/O Ports

RJ-45 2 ports

Chipset SMSC SCH5027 and EMC6D103

Voltage

Monitors voltage for CPU, memory, chipset

& power supply

Temperature

Monitors temperature for CPU & system

environment

System

Monitoring

LED

Fan fail LED indicator / Over temperature

warning indicator

Chapter 1: Overview

5

Others Watch Dog Timer support

Optional SMDC

M3291 IPMI 2.0 remote system

management card

Server

Management

M3291 Feature

Renesas H8S2167 Baseboard

Management Controller (BMC) / Supports

remote power on/off and reset (IPMI over

LAN) / Shared management NIC /

Properitary card interface (2 x 25pin

header)

Brand / ROM size Award / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0

/SMBIOS2.3 /PXE Boot / ACPI 2.0 power

management /Power on mode after power

recovery / User-configurable H/W

monitoring / Multiple boot options

Operation

System

OS supported list Please refer to our OS supported list.

FCC (Doc) Class B

Regulation

CE (Doc) Yes

Operating Temp 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS

RoHS 6/6

Complaint

Yes

Motherboard (1) S5180G2N-BB

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

Chassis Unit (1) CCHA-0240, GT14 1U chassis unit

Cover (1) CCCV-0110, Top cover for GT14

HDD Tray

(1) CHDT-0111, Internal 2.5" HDD bracket /

(1) CHDT-0120, Internal 3.5" HDD bracket -

L / (1) CHDT-0121, Internal 3.5" HDD

bracket - R

Heatsink / Cooler

(2) CFAN-0270, 4 cm fan / (1) CFAN-0241,

4 cm fan / (1) CHSK-0131, LGA775 CPU

heatsink / (1) CADT-0190, air duct

Mounting Ear (1) CEAR-0120, mounting ear kit

Riser Card (1) M2083-RS, PCI-E x16 riser card

Front Panel board

(1) M1017, front panel board / (1)

CPCA-0400, front panel USB board

Package

Contains

Power Supply (1) CPSU-0400, 250W 1U single PSU

6

Chapter 1: Overview

Cable SATA

SATA

(1) CCBL-0328, SATA signal cable, 150mm /

(1) CCBL-0329, SATA signal cable, 200mm /

(1) CCBL-032A, SATA signal cable, 300mm

USB (1) CCBL-0352, USB cable, 350mm

Front

Panel

(1) CCBL-0727, front panel cable, 500mm

Package Contains

Cable

Power

Cord

(1) CCBL-0310, US type power cord / (1)

CCBL-0300, EU type power cord

SMDC IPMI

Card

M3291

Rack

Mounting Part

(1) CRAL-0110, GT14 Standard Rail kit for

4-Post / (1) CBRK-0030, GT14 Open Rail for

2-Post / (1) CRAL-0111, GT14 Dual Rail for

4-Post w/ 2 barebones

Optional

accessories for

future upgrade

Riser Card M2061, PCI-E x8 to PCI-X 1U riser card (left)

Chapter 1: Overview

7

1.4 Unpacking

If any items are missing or appear damaged, contract your

retailer or browse to TYAN’s website for service：

http://www.tyan.com

The Web site also provides information on other TYAN

products, plus FAQs, compatibility lists, BIOS settings, and

more.

1 x Tyan Barebone Drive CD

Power Cables

Left to right: Europe, US

HDD Screws Barebone Manual

Heatsink x 1 LCD Bracket x 1

Cable Kit x 1 Mounting Ear Kit

8

Chapter 1: Overview

Rail Kit (Optional)

Rail Kit options: A, B, C

The following three rail kits are available to rackmount your GT14 B5180.

A. Rail for 4-post rack

Sliding Rails x 2

Sliding Brackets x 4 (Front L-Bracket x 2, Rear L-Bracket x2)

Mounting Brackets x 4

M4-4L screw x 18pcs

M5-8L screw x 10pcs

M5-15L screw x 4pcs

B. Rail for 3-post rack

Inner Rail Brackets x 2 (including screws)

Mounting Brackets x 2

M5-8L screw x 14pcs

M4-4L screw x 8pcs

Chapter 1: Overview

9

C. Rail for 4-post rack

Inner Rails x 2

Post Slide Mount Adapters x 4

Assembled Outer Sliding Rails x 2

M4-4L screw x 30pcs

M5-8L screw x 10pcs

M5-15L screw x 4pcs

NOTE: For detailed information on rail kit of C, please contact our sales

representative.

10

Chapter 1: Overview

1.5 About the Product

The following views show you the product.

1.5.1 System Front View

1.5.2 System Rear View

B5180G14S3M:

USB Port x 2

LCD Display

Power Supply Fan

Power Supply Socket

PCI-E Slot

PS/2 Mouse/

Keyboard Ports

Serial Port

USB Port x 4

LAN Port x 2

VGA Port

Chapter 1: Overview

11

B5180G14S3M-QT:

Power Supply Socket

Power Supply Fan

PCI-E Slot

PS/2 Mouse/

Keyboard Ports

Serial Port

USB Port x 4

LAN Port x 2

VGA Port

12

Chapter 1: Overview

Page is loading ...

Tyan Tank GT14 B5180 User manual

Related papers

Other documents