The AUDIOPLEX TECHNOLOGY ABW-AUTO 1 and ABW-AUTO 3 are covered by a Lifetime

warranty against any defects in workmanship and materials. Any defects will be remedied without

charge for labor or parts.

Damage incurred by shipping or accident is not considered to be a defect, and not covered by this

warranty. AUDIOPLEX TECHNOLOGY, is not responsible for defective operation caused by abuse or

by modification or service by any unauthorized person or agency.

The unit must be properly installed and operated according to instructions for the warranty to apply.

Any necessary servicing must be done by AUDIOPLEX TECHNOLOGY. The product must be

returned expenses prepaid, with written authorization from the company. The unit must be shipped

3. Next connect the front speaker wires to the spring connectors. On the ABW-3

connect your video source to the trigger input (phono jack).

4. On the PC board you will notice potentiometer VR2, set it for a hold-in time delay

setting from 0.1 to 85 seconds.

5. Next connect the power supply and set thc VR1 sensitivity adjustment to your desired

trip level.

6. Finally disconnect the power supply and mount the switch in the wall. Reconnect

the power supply.

7. Installation complete.

Specifications: Sensitivity .1 to 2Vpp Hold-in delay 0 to 85 seconds. Power rating 500w music power.

TECHNOLOGY

INSTALLATION MANUAL