2. WaterWay
  3. 810-1982

WaterWay 810-1982 User manual

  • Hello! I've reviewed the Waterway Bluetooth Installation Instructions for NEO 2100, NEO 1500, and NEO 1200. This document provides a step-by-step guide on installing the Bluetooth circuit board with the usage of a screw and standoffs, ensuring proper connection to an audio amplifier via 3.5mm cable. I'm ready to answer your questions related to the installation process, compatibility and other related aspects of that device.
  • Does the Bluetooth kit include a 3.5mm connector cable?
    Where does the 3.5mm connector cable need to be connected?
    What size screw is used to secure the Bluetooth circuit board?
Bluetooth Installation Instructions – NEO 2100, NEO 1500 & NEO 1200
1. Remove indicated mounting screw.
2. Install ¼” hex standoff.
BLUETOOTH KIT
To install Waterway Bluetooth please follow instructions below:
2200 E. Sturgis Rd., Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403
[email protected] • www.waterwayplastics.com
Designed,
Engineered &
Manufactured
in the USA.
810-1982.0216
©2016 Waterway Plastics
Bluetooth kit does not include 3.5mm connector
cable. 3.5mm connector cable needs to connect to J1
on the Bluetooth circuit board to an Audio input of the
Audio Amplifier. See Bluetooth operation manual.
#6-32 SCREW
HEX STANDOFF
BLUETOOTH
CIRCUIT BOARD
3. Install Bluetooth circuit board. Connector JP3 should
mate with the Bluetooth circuit board.
4. Secure the Bluetooth circuit board with a #6-32 screw.
JP3
/