WaterWay 810-1982 User manual

Brand
WaterWay
Model
810-1982
Type
User manual
Bluetooth Installation Instructions – NEO 2100, NEO 1500 & NEO 1200
1. Remove indicated mounting screw.
2. Install ¼” hex standoff.
BLUETOOTH KIT
To install Waterway Bluetooth please follow instructions below:
2200 E. Sturgis Rd., Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403
[email protected] • www.waterwayplastics.com
Designed,
Engineered &
Manufactured
in the USA.
810-1982.0216
©2016 Waterway Plastics
Bluetooth kit does not include 3.5mm connector
cable. 3.5mm connector cable needs to connect to J1
on the Bluetooth circuit board to an Audio input of the
Audio Amplifier. See Bluetooth operation manual.
#6-32 SCREW
HEX STANDOFF
BLUETOOTH
CIRCUIT BOARD
3. Install Bluetooth circuit board. Connector JP3 should
mate with the Bluetooth circuit board.
4. Secure the Bluetooth circuit board with a #6-32 screw.
JP3
  • Page 1 1

WaterWay 810-1982 User manual

Brand
WaterWay
Model
810-1982
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents