Sharper Image 2-in-1 Inflatable Axe Throwing and Ball-Toss Game User manual

Brand: Sharper Image

Model: 2-in-1 Inflatable Axe Throwing and Ball-Toss Game

Type: User manual

2-in-1 Viking’s Throw

Safety and Assembly Instructions

#733885 | Ages 3+

Target board, when inﬂated 58½"L x 41"W x 58½"H

Includes:

3 Balls

3 Weighted axes

4 Ground stakes

with tether

1 Target board

(two-sided)

Using Two-Stage Quick-Release Air Valves:

This toy is equipped with two-stage quick-release

valves which allow fast inﬂation and deﬂation.

One-Way

Valve

Quick-Release

Valve

Valve CapA

TO INFLATE:

1. Open A, making sure B is still firmly inserted into

C. Insert pump nozzle into B to inflate. DO NOT

OVERINFLATE.

2. Firmly insert A into B to close valve.

3. Push C into the body of the inflatable.

TO DEFLATE:

1. Pull out B to quickly release the air out of C,

hands-free! DO NOT JERK ON VALVE.

Need a Hand?

We’re here to help! For questions regarding assembly,

product maintenance and care, please reach out:

• Email: Happy@Hearthsong.com

• Phone: 1-800-533-4397

• Direct message us on social fi

We’ll work together to ensure your best experience!

Complete policy at Hearthsong.com/Returns

Inﬂation:

• The target board and axes must be at room

temperature before it is inﬂated. Otherwise it is at risk of

temperature shock and can become defective.

• Hand, electric, or foot pump recommended for inﬂation,

sold separately at Hearthsong.com. Please do not

overinﬂate.

• Do not inﬂate with an air compressor or any

high-pressure hose at a ﬁlling station.

Prior to Assembly & Set-up:

Find the right spot. Use on ﬂat

surface free of sharp objects that

can harm players or damage game

components. To stabilize target

board, ﬁll the water compartment

in the base with a garden hose and

tightly shut the water valve.

Set-up:

• Loop the center of the string through holes on each

side of inﬂated target board and ﬁrmly knot.

• Knot string ends onto ground stakes and push stakes all

the way into ﬁrm ground, stabilizing target.

#733885 Conforms to ASTM F963. Made in China.

Safety Warning Information:

• This game is not for commercial use.

• This game is not an aquatic toy. It is not intended to

be a lifesaving or ﬂotation device.

• Keep away from open ﬂames.

• Do not use on or near surfaces containing sharp or

jagged objects.

Liability:

While every attempt is made to embody the highest

degree of protection in all equipment, we cannot

guarantee freedom from injury. The user assumes all risk of

injury due to use. All merchandise is sold on this condition,

which no representative of the company can waive

or change.

Vinyl Plastic Repair:

A vinyl plastic repair kit is included with your inflatable.

TO USE:

• Thoroughly clean the damaged area and allow surface

to dry for a minimum of 10 minutes.

• Cut a patch large enough to completely cover the hole

or puncture.

• Remove the paper backing from the patch and press

patch firmly over affected area.

• Do not inflate for 20 minutes.

Sharper Image 2-in-1 Inflatable Axe Throwing and Ball-Toss Game User manual

Sharper Image 2-in-1 Inflatable Axe Throwing and Ball-Toss Game User manual

Sharper Image 2-in-1 Inflatable Axe Throwing and Ball-Toss Game User manual

Related papers

Other documents