2. Arcan
  3. Professional Adjustable Height Shop Seat

Arcan Professional Adjustable Height Shop Seat Owner's manual

  • Hello! I've reviewed the assembly instructions for the Arcan AR8000 Shop Seat. This document details how to assemble the seat with its five casters, and also provides essential information regarding maintenance and safety warnings. I am ready to assist you further if you have any questions about this device.
  • What tools are needed for assembly?
    How do I clean the shop seat?
    What is the maximum weight capacity?
MODEL AR8000
PROFESSIONAL ADJUSTABLE HEIGHT
SHOP SEAT
ASSEMBLY INSTRUCTIONS
Rev. 09/30/13
© Copyright 2013, Arcan Professional Tools®
Maximum weight capacity - 300 Lbs.
Moveable objects can be unstable.
Do not stand on or use as cart.
Falls or loss of load can cause injury.
This product may contain one or more chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm. Wash hands thoroughly after handling.
California 93120 Compliant for Formaldehyde
Tools Needed for Assembly:
13mm Wrench or Ratchet with 13mm Socket
Assembly Instructions:
1. Attach all ve (5) casters to bottom of round
metal base. The bottom of the base is opposite
the side with the center round hole collar. Insert
the threaded stem of each caster through each of
the holes, add washers and tighten nuts onto
stems with a 13mm wrench or ratchet with
13mm socket.
Care Instructions:
Your professional shop seat is designed to give
you worry-free service with little to no
maintenance. There should be no need for
periodic oiling or maintenance of the seat or
cylinder. Simply clean with a damp cloth. Avoid
contact with harsh chemicals.
• Replacement air cylinder available as part
# RSAR8000C
• Replacement caster with washer and nut
available as part # RSAR8000WH
WARNING
/