HPE JG619A Reference guide

HPE FlexFabric 12900E Switch Series

Multicast Command Reference

Software

version: Release 5210

Document version: 6W100-20230424

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard

Enterprise products and services are set forth in the express warranty statements accompanying such

products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett

Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or

copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software

Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s

standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard

Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise

website.

Acknowledgments

Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation in the

United States and other countries.

Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.

Java and Oracle are registered trademarks of Oracle and/or its affiliates.

UNIX® is a registered trademark of The Open Group.

i

Contents

IGMP snooping commands ············································································ 1

display igmp-snooping ······························································································································· 1

display igmp-snooping group ····················································································································· 3

display igmp-snooping host-tracking ·········································································································· 5

display igmp-snooping router-port·············································································································· 6

display igmp-snooping static-group ············································································································ 7

display igmp-snooping static-router-port ···································································································· 9

display igmp-snooping statistics··············································································································· 10

display l2-multicast fast-forwarding cache ······························································································· 11

display l2-multicast ip ······························································································································· 12

display l2-multicast ip forwarding ············································································································· 14

display l2-multicast mac ··························································································································· 15

display l2-multicast mac forwarding ········································································································· 16

display mac-address [ multicast ] ············································································································· 17

dot1p-priority (IGMP-snooping view) ········································································································ 18

dscp ·························································································································································· 19

enable (IGMP-snooping view) ·················································································································· 19

entry-limit (IGMP-snooping view) ············································································································· 20

fast-leave (IGMP-snooping view) ············································································································· 20

global-enable (IGMP-snooping view) ······································································································· 21

group-policy (IGMP-snooping view) ········································································································· 22

host-aging-time (IGMP-snooping view) ···································································································· 23

igmp-snooping ·········································································································································· 24

igmp-snooping cvid-forward ····················································································································· 25

igmp-snooping dot1p-priority ···················································································································· 25

igmp-snooping { disable | enable } ··········································································································· 26

igmp-snooping fast-leave ························································································································· 27

igmp-snooping general-query source-ip ··································································································· 28

igmp-snooping group-policy ····················································································································· 28

igmp-snooping host-aging-time ················································································································ 30

igmp-snooping host-join ··························································································································· 31

igmp-snooping host-tracking ···················································································································· 32

igmp-snooping last-member-query-interval······························································································ 32

igmp-snooping leave source-ip ················································································································ 33

igmp-snooping max-response-time ·········································································································· 34

igmp-snooping overflow-replace ·············································································································· 35

igmp-snooping proxy enable ···················································································································· 36

igmp-snooping querier ····························································································································· 36

igmp-snooping querier-election ················································································································ 37

igmp-snooping query-interval ··················································································································· 38

igmp-snooping report source-ip ··············································································································· 39

igmp-snooping router-aging-time ············································································································· 39

igmp-snooping router-port-deny ··············································································································· 40

igmp-snooping source-deny ····················································································································· 41

igmp-snooping special-query source-ip ··································································································· 41

igmp-snooping static-group ······················································································································ 42

igmp-snooping static-router-port ·············································································································· 43

igmp-snooping version ····························································································································· 44

last-member-query-interval (IGMP-snooping view) ·················································································· 45

max-response-time (IGMP-snooping view) ······························································································ 45

overflow-replace (IGMP-snooping view) ·································································································· 46

report-aggregation (IGMP-snooping view) ······························································································· 47

reset igmp-snooping group ······················································································································ 47

reset igmp-snooping router-port ··············································································································· 48

reset igmp-snooping statistics ·················································································································· 48

reset l2-multicast fast-forwarding cache ··································································································· 49

router-aging-time (IGMP-snooping view) ································································································· 49

ii

send-query enable ··································································································································· 50

source-deny (IGMP-snooping view) ········································································································· 51

version (IGMP-snooping view) ················································································································· 51

PIM snooping commands ············································································ 53

display pim-snooping neighbor ················································································································ 53

display pim-snooping router-port ·············································································································· 54

display pim-snooping routing-table ·········································································································· 55

display pim-snooping statistics ················································································································· 57

pim-snooping enable ································································································································ 58

reset pim-snooping statistics ···················································································································· 58

Multicast VLAN commands ·········································································· 60

display multicast-vlan ······························································································································· 60

display multicast-vlan forwarding-table ···································································································· 61

display multicast-vlan group ····················································································································· 62

multicast-vlan ··········································································································································· 64

port (multicast-VLAN view) ······················································································································· 65

port multicast-vlan ···································································································································· 65

reset multicast-vlan group ························································································································ 66

subvlan (multicast-VLAN view) ················································································································ 67

Multicast routing and forwarding commands ················································ 68

delete ip rpf-route-static ··························································································································· 68

display mrib interface ······························································································································· 68

display multicast boundary ······················································································································· 70

display multicast fast-forwarding cache ··································································································· 70

display multicast forwarding event ··········································································································· 72

display multicast forwarding-table ············································································································ 73

display multicast routing-table ·················································································································· 75

display multicast routing-table static ········································································································ 77

display multicast rpf-info ··························································································································· 78

ip rpf-route-static ······································································································································ 79

load-splitting (MRIB view) ························································································································ 80

longest-match (MRIB view) ······················································································································ 81

mtrace-service port ·································································································································· 81

mtrace v1 ················································································································································· 82

mtrace v2 ················································································································································· 85

multicast boundary ··································································································································· 89

multicast routing ······································································································································· 90

reset multicast fast-forwarding cache ······································································································· 91

reset multicast forwarding event ·············································································································· 92

reset multicast forwarding-table ··············································································································· 92

reset multicast routing-table ····················································································································· 93

IGMP commands ························································································· 95

display igmp group ··································································································································· 95

display igmp interface ······························································································································ 98

display igmp proxy group ······················································································································· 101

display igmp proxy routing-table ············································································································ 103

display igmp ssm-mapping ····················································································································· 105

igmp ······················································································································································· 106

igmp enable ············································································································································ 106

igmp group-policy ··································································································································· 107

igmp last-member-query-count ·············································································································· 108

igmp last-member-query-interval ··········································································································· 109

igmp max-response-time ························································································································ 110

igmp other-querier-present-interval ········································································································ 110

igmp proxy enable ·································································································································· 111

igmp query-interval ································································································································· 112

igmp robust-count ·································································································································· 112

igmp startup-query-count ······················································································································· 113

iii

igmp startup-query-interval ···················································································································· 114

igmp static-group ···································································································································· 114

igmp version ··········································································································································· 115

last-member-query-count (IGMP view) ·································································································· 116

last-member-query-interval (IGMP view) ······························································································· 116

max-response-time (IGMP view) ············································································································ 117

other-querier-present-interval (IGMP view) ···························································································· 118

query-interval (IGMP view) ····················································································································· 119

reset igmp group ···································································································································· 119

robust-count (IGMP view) ······················································································································ 120

ssm-mapping (IGMP view) ····················································································································· 121

startup-query-count (IGMP view) ··········································································································· 122

startup-query-interval (IGMP view) ········································································································ 122

PIM commands ·························································································· 124

anycast-rp (PIM view) ···························································································································· 124

auto-rp enable (PIM view) ······················································································································ 124

bsm-fragment enable (PIM view) ··········································································································· 125

bsm-reflection enable (PIM view) ··········································································································· 125

bsr-policy (PIM view) ······························································································································ 126

c-bsr (PIM view) ····································································································································· 127

c-rp (PIM view) ······································································································································· 128

crp-policy (PIM view) ······························································································································ 129

display interface register-tunnel ············································································································· 130

display pim bsr-info ································································································································ 132

display pim claimed-route ······················································································································ 133

display pim c-rp ······································································································································ 135

display pim interface ······························································································································ 136

display pim neighbor ······························································································································ 138

display pim routing-table ························································································································ 140

display pim rp-info ·································································································································· 143

display pim statistics ······························································································································ 145

dscp ························································································································································ 146

hello-option dr-priority (PIM view) ·········································································································· 147

hello-option holdtime (PIM view) ············································································································ 147

hello-option lan-delay (PIM view) ··········································································································· 148

hello-option neighbor-tracking (PIM view) ······························································································ 149

hello-option override-interval (PIM view) ································································································ 149

holdtime join-prune (PIM view)··············································································································· 150

jp-pkt-size (PIM view) ····························································································································· 151

pim ························································································································································· 151

pim bfd enable ········································································································································ 152

pim bsr-boundary ··································································································································· 153

pim dm ··················································································································································· 153

pim hello-option dr-priority ······················································································································ 154

pim hello-option holdtime ······················································································································· 155

pim hello-option lan-delay ······················································································································ 155

pim hello-option neighbor-tracking ········································································································· 156

pim hello-option override-interval ··········································································································· 157

pim holdtime join-prune ·························································································································· 158

pim neighbor-policy ································································································································ 158

pim non-stop-routing ······························································································································ 159

pim passive ············································································································································ 160

pim require-genid ··································································································································· 160

pim sm ···················································································································································· 161

pim state-refresh-capable ······················································································································ 161

pim timer graft-retry ································································································································ 162

pim timer hello ········································································································································ 162

pim timer join-prune ······························································································································· 163

pim triggered-hello-delay ························································································································ 164

register-policy (PIM view) ······················································································································· 164

register-suppression-timeout (PIM view) ································································································ 165

iv

register-whole-checksum (PIM view) ····································································································· 166

snmp-agent trap enable pim ·················································································································· 166

source-lifetime (PIM view) ······················································································································ 167

source-policy (PIM view) ························································································································ 168

spt-switch-threshold (PIM view) ············································································································· 169

ssm-policy (PIM view) ···························································································································· 170

state-refresh-interval (PIM view) ············································································································ 170

state-refresh-rate-limit (PIM view) ·········································································································· 171

state-refresh-ttl (PIM view) ····················································································································· 172

static-rp (PIM view) ································································································································ 172

timer hello (PIM view) ····························································································································· 173

timer join-prune (PIM view) ···················································································································· 174

MSDP commands ······················································································ 176

cache-sa-enable ····································································································································· 176

display msdp brief ·································································································································· 176

display msdp peer-status ······················································································································· 178

display msdp sa-cache ··························································································································· 181

display msdp sa-count ··························································································································· 182

encap-data-enable ································································································································· 183

import-source ········································································································································· 184

msdp ······················································································································································ 185

originating-rp ·········································································································································· 185

peer ························································································································································ 186

peer description ······································································································································ 187

peer mesh-group ···································································································································· 187

peer minimum-ttl ···································································································································· 188

peer request-sa-enable ·························································································································· 188

peer sa-cache-maximum ························································································································ 189

peer sa-policy ········································································································································· 190

peer sa-request-policy ···························································································································· 191

reset msdp peer ····································································································································· 192

reset msdp sa-cache ······························································································································ 192

reset msdp statistics ······························································································································· 193

shutdown (MSDP view) ·························································································································· 194

static-rpf-peer ········································································································································· 194

timer keepalive ······································································································································· 195

timer retry ··············································································································································· 196

MLD snooping commands ········································································· 197

display ipv6 l2-multicast fast-forwarding cache ······················································································ 197

display ipv6 l2-multicast ip ····················································································································· 198

display ipv6 l2-multicast ip forwarding···································································································· 199

display ipv6 l2-multicast mac ················································································································· 200

display ipv6 l2-multicast mac forwarding································································································ 201

display mld-snooping ····························································································································· 202

display mld-snooping group ··················································································································· 205

display mld-snooping host-tracking ········································································································ 207

display mld-snooping router-port ············································································································ 208

display mld-snooping static-group ·········································································································· 209

display mld-snooping static-router-port ·································································································· 210

display mld-snooping statistics ··············································································································· 211

dot1p-priority (MLD-snooping view) ······································································································· 212

dscp ························································································································································ 213

enable (MLD-snooping view) ················································································································· 214

entry-limit (MLD-snooping view)············································································································· 214

fast-leave (MLD-snooping view)············································································································· 215

global-enable (MLD-snooping view)······································································································· 216

group-policy (MLD-snooping view)········································································································· 216

host-aging-time (MLD-snooping view) ··································································································· 218

host-tracking (MLD-snooping view) ········································································································ 218

last-listener-query-interval (MLD-snooping view) ··················································································· 219

v

max-response-time (MLD-snooping view) ····························································································· 220

mld-snooping ·········································································································································· 220

mld-snooping cvid-forward ····················································································································· 221

mld-snooping done source-ip ················································································································· 222

mld-snooping dot1p-priority ···················································································································· 222

mld-snooping drop-unknown ·················································································································· 223

mld-snooping { disable | enable } ··········································································································· 224

mld-snooping fast-leave ························································································································· 225

mld-snooping general-query source-ip··································································································· 225

mld-snooping group-policy ····················································································································· 226

mld-snooping host-aging-time ················································································································ 228

mld-snooping host-join ··························································································································· 229

mld-snooping host-tracking ···················································································································· 230

mld-snooping last-listener-query-interval ······························································································· 230

mld-snooping max-response-time ·········································································································· 231

mld-snooping overflow-replace ·············································································································· 232

mld-snooping proxy enable ···················································································································· 233

mld-snooping querier ····························································································································· 233

mld-snooping querier-election ················································································································ 234

mld-snooping query-interval ··················································································································· 235

mld-snooping report source-ip ··············································································································· 236

mld-snooping router-aging-time ············································································································· 237

mld-snooping router-port-deny ··············································································································· 237

mld-snooping source-deny ····················································································································· 238

mld-snooping special-query source-ip ··································································································· 239

mld-snooping static-group ······················································································································ 240

mld-snooping static-router-port ·············································································································· 240

mld-snooping version ····························································································································· 241

overflow-replace (MLD-snooping view) ·································································································· 242

report-aggregation (MLD-snooping view) ······························································································· 243

reset ipv6 l2-multicast fast-forwarding cache ························································································· 243

reset mld-snooping group ······················································································································ 244

reset mld-snooping router-port ··············································································································· 244

reset mld-snooping statistics ·················································································································· 245

router-aging-time (MLD-snooping view) ································································································· 245

send-query enable ································································································································· 246

source-deny (MLD-snooping view) ········································································································ 246

version (MLD-snooping view) ················································································································· 247

IPv6 PIM snooping commands ·································································· 249

display ipv6 pim-snooping neighbor ······································································································· 249

display ipv6 pim-snooping router-port ···································································································· 250

display ipv6 pim-snooping routing-table ································································································· 251

display ipv6 pim-snooping statistics ······································································································· 253

ipv6 pim-snooping enable ······················································································································ 253

reset ipv6 pim-snooping statistics ·········································································································· 254

IPv6 multicast VLAN commands ································································ 255

display ipv6 multicast-vlan ····················································································································· 255

display ipv6 multicast-vlan forwarding-table··························································································· 256

display ipv6 multicast-vlan group ··········································································································· 257

ipv6 multicast-vlan ·································································································································· 259

ipv6 port multicast-vlan ·························································································································· 260

port (IPv6 multicast VLAN view)············································································································· 260

reset ipv6 multicast-vlan group ·············································································································· 261

subvlan (IPv6 multicast VLAN view) ······································································································ 262

IPv6 multicast routing and forwarding commands ······································ 263

delete ipv6 rpf-route-static ······················································································································ 263

display ipv6 mrib interface ······················································································································ 263

display ipv6 multicast boundary ············································································································· 265

display ipv6 multicast forwarding event ·································································································· 266

vi

display ipv6 multicast forwarding-table ·································································································· 267

display ipv6 multicast hpf-forwarding-table ···························································································· 269

display ipv6 multicast routing-table ········································································································ 271

display ipv6 multicast routing-table static ······························································································· 273

display ipv6 multicast rpf-info ················································································································· 274

ipv6 mtrace-service port ························································································································· 275

ipv6 multicast boundary ························································································································· 276

ipv6 multicast routing ····························································································································· 277

ipv6 multicast rpf-fail-pkt trap-to-cpu ······································································································ 278

ipv6 rpf-route-static ································································································································ 279

load-splitting (IPv6 MRIB view) ·············································································································· 280

longest-match (IPv6 MRIB view) ············································································································ 281

mtrace v2 ipv6 ········································································································································ 281

reset ipv6 multicast forwarding event ····································································································· 285

reset ipv6 multicast forwarding-table ······································································································ 285

reset ipv6 multicast routing-table ··········································································································· 286

MLD commands ························································································ 288

display mld group ··································································································································· 288

display mld interface ······························································································································ 291

display mld proxy group ························································································································· 294

display mld proxy routing-table ·············································································································· 295

display mld ssm-mapping ······················································································································· 298

dscp ························································································································································ 299

last-listener-query-count (MLD view) ····································································································· 299

last-listener-query-interval (MLD view) ··································································································· 300

max-response-time (MLD view) ············································································································· 301

mld ························································································································································· 301

mld enable ·············································································································································· 302

mld group-policy ····································································································································· 303

mld last-listener-query-count ·················································································································· 304

mld last-listener-query-interval ··············································································································· 304

mld max-response-time ·························································································································· 305

mld non-stop-routing ······························································································································ 306

mld other-querier-present-timeout ·········································································································· 306

mld proxy enable ···································································································································· 307

mld proxy forwarding ······························································································································ 308

mld query-interval ··································································································································· 308

mld robust-count ···································································································································· 309

mld startup-query-count ························································································································· 310

mld startup-query-interval ······················································································································ 311

mld static-group ······································································································································ 311

mld version ············································································································································· 312

other-querier-present-timeout (MLD view) ····························································································· 313

proxy multipath (MLD view) ···················································································································· 314

query-interval (MLD view) ······················································································································ 314

reset mld group ······································································································································ 315

robust-count (MLD view) ························································································································ 316

ssm-mapping (MLD view) ······················································································································ 317

startup-query-count (MLD view) ············································································································· 318

startup-query-interval (MLD view) ·········································································································· 318

IPv6 PIM commands ·················································································· 320

anycast-rp (IPv6 PIM view) ···················································································································· 320

bsm-fragment enable (IPv6 PIM view) ··································································································· 320

bsm-reflection enable (IPv6 PIM view)··································································································· 321

bsr-policy (IPv6 PIM view) ······················································································································ 321

bsr-rp-mapping rfc2362 (IPv6 PIM view)································································································ 322

c-bsr (IPv6 PIM view) ····························································································································· 323

c-rp (IPv6 PIM view) ······························································································································· 324

crp-policy (IPv6 PIM view) ······················································································································ 325

display ipv6 pim bsr-info ························································································································· 326

vii

display ipv6 pim claimed-route ··············································································································· 327

display ipv6 pim c-rp ······························································································································ 329

display ipv6 pim interface ······················································································································· 330

display ipv6 pim neighbor ······················································································································· 332

display ipv6 pim routing-table ················································································································· 334

display ipv6 pim rp-info ·························································································································· 338

display ipv6 pim statistics ······················································································································· 341

embedded-rp ·········································································································································· 342

hello-option dr-priority (IPv6 PIM view) ·································································································· 343

hello-option holdtime (IPv6 PIM view) ···································································································· 343

hello-option lan-delay (IPv6 PIM view) ··································································································· 344

hello-option neighbor-tracking (IPv6 PIM view) ······················································································ 345

hello-option override-interval (IPv6 PIM view) ························································································ 345

holdtime join-prune (IPv6 PIM view) ······································································································ 346

ipv6 pim ·················································································································································· 347

ipv6 pim bfd enable ································································································································ 348

ipv6 pim bsr-boundary ···························································································································· 348

ipv6 pim dm ············································································································································ 349

ipv6 pim hello-option dr-priority ·············································································································· 350

ipv6 pim hello-option holdtime ················································································································ 350

ipv6 pim hello-option lan-delay··············································································································· 351

ipv6 pim hello-option neighbor-tracking ································································································· 352

ipv6 pim hello-option override-interval ··································································································· 353

ipv6 pim holdtime join-prune ·················································································································· 353

ipv6 pim neighbor-policy ························································································································ 354

ipv6 pim non-stop-routing ······················································································································· 355

ipv6 pim passive ····································································································································· 355

ipv6 pim require-genid ···························································································································· 356

ipv6 pim sm ············································································································································ 356

ipv6 pim state-refresh-capable ··············································································································· 357

ipv6 pim timer graft-retry ························································································································ 358

ipv6 pim timer hello ································································································································ 358

ipv6 pim timer join-prune ························································································································ 359

ipv6 pim triggered-hello-delay ················································································································ 360

jp-pkt-size (IPv6 PIM view) ····················································································································· 360

register-policy (IPv6 PIM view)··············································································································· 361

register-suppression-timeout (IPv6 PIM view) ······················································································· 362

register-whole-checksum (IPv6 PIM view) ····························································································· 362

snmp-agent trap enable pim6 ················································································································ 363

source-lifetime (IPv6 PIM view)·············································································································· 364

source-policy (IPv6 PIM view) ················································································································ 364

spt-switch-threshold (IPv6 PIM view) ····································································································· 365

ssm-policy (IPv6 PIM view) ···················································································································· 366

state-refresh-hoplimit (IPv6 PIM view) ··································································································· 367

state-refresh-interval (IPv6 PIM view) ···································································································· 368

state-refresh-rate-limit (IPv6 PIM view) ·································································································· 369

static-rp (IPv6 PIM view) ························································································································ 369

timer hello (IPv6 PIM view) ···················································································································· 370

timer join-prune (IPv6 PIM view) ············································································································ 371

Document conventions and icons ······························································ 373

Conventions ··················································································································································· 373

Network topology icons ·································································································································· 374

Support and other resources ····································································· 375

Accessing Hewlett Packard Enterprise Support····························································································· 375

Accessing updates ········································································································································· 375

Websites ················································································································································ 376

Customer self repair ······························································································································· 376

Remote support ······································································································································ 376

Documentation feedback ······················································································································· 376

viii

Index ·········································································································· 378

1

IGMP snooping commands

display igmp-snooping

Use display igmp-snooping to display IGMP snooping status.

Syntax

display igmp-snooping [ global | vlan vlan-id ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

global: Displays the global IGMP snooping status.

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.

Usage guidelines

If you do not specify any parameters, this command displays the global IGMP snooping status and

the IGMP snooping status in all VLANs.

Examples

# Display the global IGMP snooping status and the IGMP snooping status for all VLANs

<Sysname> display igmp-snooping

IGMP snooping information: Global

Global-enable: Enabled

Host-aging-time: 260s

Router-aging-time: 260s

Max-response-time: 10s

Last-member-query-interval: 1s

Report-aggregation: Enabled

Host-tracking: Disabled

Dot1p-priority: --

DRNI: Enabled (IPP: Bridge-Aggregation 1)

IGMP snooping information: VLAN 1

IGMP snooping: Enabled

Version: 2

Host-aging-time: 260s

Router-aging-time: 260s

Max-response-time: 10s

Last-member-query-interval: 1s

Querier: Enabled (IP: 1.1.1.1, Expires: 00:02:05)

Querier-election: Enabled

Query-interval: 125s

General-query source IP: 1.1.1.1

2

Special-query source IP: 2.2.2.2

Report source IP: 3.0.0.3

Leave source IP: 1.0.0.1

Host-tracking: Disabled

Dot1p-priority: 2

Proxy: Disabled

IPP: Bridge-Aggregation 1

IGMP snooping information: VLAN 10

IGMP snooping: Enabled

Version: 3

Host-aging-time: 260s

Router-aging-time: 260s

Max-response-time: 10s

Last-member-query-interval: 1s

Querier: Enabled (IP: 1.1.1.1, Expires: 00:02:05)

Querier-election: Enabled

Query-interval: 125s

General-query source IP: 1.1.1.1

Special-query source IP: 2.2.2.2

Report source IP: 3.0.0.3

Leave source IP: 1.0.0.1

Host-tracking: Disabled

Dot1p-priority: --

Proxy: Disabled

IPP: Bridge-Aggregation 1

Table 1 Command output

Field

Description

Global-enable Global IGMP snooping status:

• Enabled.

• Disabled.

IGMP snooping

IGMP snooping status in a VLAN:

• Enabled.

• Disabled.

• Globally enabled.

• Inactive—IGMP snooping configuration does not take effect.

Version IGMP snooping version.

Host-aging-time Aging timer for the dynamic member port.

Router-aging-time Aging timer for the dynamic router port.

Max-response-time Maximum response time for IGMP general queries.

Last-member-query-interval Interval for sending IGMP group-specific queries.

Report-aggregation Status of IGMP report suppression:

• Enabled.

• Disabled.

Dot1p-priority 802.1p priority for IGMP messages. If the priority is not configured, this field

displays two hyphens (--).

3

Field

Description

Querier Status of IGMP snooping querier:

• Enabled.

• Disabled.

(IP: 1.1.1.1, Expires:

00:02:05)

IGMP snooping querier information:

• IP—IP address of the IGMP snooping querier.

• Expire—Remaining aging time for the IGMP snooping querier.

This field is not displayed if IGMP snooping querier election is disabled.

Querier-election Status of IGMP snooping querier election:

• Enabled.

• Disabled.

Query-interval Interval for sending IGMP general queries.

General-query source IP Source IP address of IGMP general queries.

Special-query source IP Source IP address of IGMP group-specific queries.

Report source IP Source IP address of IGMP reports.

Leave source IP Source IP address of IGMP leave messages.

Host-tracking

Status of host tracking:

• Enabled

• Disabled.

• Globally enabled.

Proxy Status of IGMP snooping proxying:

• Enabled.

• Disabled.

DRNI DRNI enabling status:

• Enabled.

• Disabled

Link ID Link ID for the IPP in the VSI.

display igmp-snooping group

Use display igmp-snooping group to display information about dynamic IGMP snooping

group entries.

Syntax

display igmp-snooping group [ group-address | source-address ] * [ vlan

vlan-id ] [ interface interface-type interface-number | [ verbose ] [ slot

slot-number ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

4

Parameters

group-address: Specifies a multicast group by its IP address in the range of 224.0.1.0 to

239.255.255.255. If you do not specify a multicast group, this command displays information about

dynamic IGMP snooping group entries for all multicast groups.

source-address: Specifies a multicast source by its IP address. If you do not specify a multicast

source, this command displays information about dynamic IGMP snooping group entries for all

multicast sources.

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a

VLAN, this command displays information about dynamic IGMP snooping group entries for all

VLANs.

interface interface-type interface-number: Specifies an interface by its type and

number. If you do not specify an interface, this command displays brief information about dynamic

IGMP snooping group entries for all interfaces.

verbose: Displays detailed information about dynamic IGMP snooping group entries. If you do not

specify this keyword, the command displays brief information about dynamic IGMP snooping group

entries.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this

command displays information about dynamic IGMP snooping group entries for the MPU.

Examples

# Display brief information about dynamic IGMP snooping group entries for HundredGigE 1/0/1.

<Sysname> display igmp-snooping group interface hundredgige 1/0/1

Total 1 entries.

HGE1/0/1:

VLAN 2: Total 1 entries.

(0.0.0.0, 224.1.1.1) (00:03:23)

# Display detailed information about dynamic IGMP snooping group entries for VLAN 2.

<Sysname> display igmp-snooping group vlan 2 verbose

Total 1 entries.

VLAN 2: Total 1 entries.

(0.0.0.0, 224.1.1.1)

Attribute: local port

FSM information: dummy

Host slots (0 in total):

Host ports (1 in total):

HGE1/0/2 (00:03:23)

Table 2 Command output

Field

Description

Total 1 entries Total number of dynamic IGMP snooping group entries.

VLAN 2: Total 1 entries Total number of dynamic IGMP snooping group entries in VLAN 2.

(0.0.0.0, 224.1.1.1) (S, G) entry, where 0.0.0.0 in the S position means all multicast sources.

Attribute

Entry attribute:

• global port—The entry has a global port.

• local port—The entry has a port that resides on the card for which

the information is displayed.

5

Field

Description

• slot—The entry has ports that reside on other cards, but not on the

card for which the information is displayed.

FSM information

Finite state machine information of the entry:

• delete—The entry attributes have been deleted.

• dummy—The entry is a new temporary entry.

• no info—No entry exists.

• normal—The entry is a correct entry.

Host slots (0 in total) Slot numbers and total number of the cards that have member ports,

except for the specified card or the MPU when no card is specified.

Host ports (1 in total) Member ports, and the total number of member ports.

(00:03:23)

Remaining aging time for the dynamic member port.

For a global port (such as Layer 2 aggregate interfaces, ACs), this field is

always displayed.

For a non-global port, this field is displayed when one of the following

conditions exists:

• The port is on the specified card.

• The port is on the MPU and no card is specified.

HGE1/0/3 (Link ID 0) AC and its link ID.

VLAN pairs (1 in total) VLAN pairs and total number of the VLAN pairs.

Outer VLAN 5 Inner VLAN 2 Outer VLAN ID and inner VLAN ID.

Related commands

reset igmp-snooping group

display igmp-snooping host-tracking

Use display igmp-snooping host-tracking to display host tracking information.

Syntax

display igmp-snooping host-tracking vlan vlan-id group group-address

[ source source-address ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.

group group-address: Specifies a multicast group by its IP address in the range of 224.0.1.0 to

239.255.255.255.

source source-address: Specifies a multicast source by its IP address. If you do not specify a

multicast source, this command displays host tracking information for all multicast sources.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this

command displays host tracking information for the MPU.

6

Examples

# Display tracking information for hosts that have joined multicast group 224.1.1.1 in VLAN 2.

<Sysname> display igmp-snooping host-tracking vlan 2 group 224.1.1.1

VLAN 2

(0.0.0.0, 224.1.1.1)

Port: HGE1/0/1

Host Uptime Expires

1.1.1.1 00:02:20 00:00:40

2.2.2.2 00:02:21 00:00:39

Table 3 Command output

Field

Description

VLAN VLAN ID.

(0.0.0.0, 224.1.1.1) (S, G) entry, where 0.0.0.0 in the S position means any multicast sources.

Port Member port.

Host IP address of the host.

Uptime Length of time elapsed since the host joined the multicast group.

Expires

Remaining

timeout time for the host. The host timeout time is the same as

the aging timer for the port. The timer is reset when the port receives an

IGMP report from the host.

This field displays timeout if the host times out.

Related commands

host-tracking (IGMP-snooping view)

igmp-snooping enable

igmp-snooping host-tracking

display igmp-snooping router-port

Use display igmp-snooping router-port to display dynamic router port information.

Syntax

display igmp-snooping router-port [ vlan vlan-id ] [ verbose ] [ slot

slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

verbose: Displays detailed information. If you do not specify the keyword, this command displays

brief information.

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a

VLAN, this command displays dynamic router port information for all VLANs.

7

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this

command displays dynamic router port information for the MPU.

Examples

# Display brief information about dynamic router ports for VLAN 2.

<Sysname> display igmp-snooping router-port vlan 2

VLAN 2:

Router ports (2 in total):

HGE1/0/1 (00:01:30)

HGE1/0/2 (00:00:23)

# Display detailed information about dynamic router ports for VLAN 2.

<Sysname> display igmp-snooping router-port vlan 2 verbose

VLAN 2:

Router slots (0 in total):

Router ports (2 in total):

HGE1/0/1 (00:01:30)

HGE1/0/2 (00:00:23)

Table 4 Command output

Field

Description

VLAN 2 VLAN ID.

Router slots (0 in total) Slot numbers and total number of the cards that have dynamic router ports,

except for the specified card or the MPU when no card is specified.

Router ports (2 in total) Dynamic router ports and total number of dynamic router ports.

(00:01:30)

Remaining aging time for the dynamic router port.

For a global port, this field is always displayed.

For a global port, this field is displayed when one of the following conditions

exists:

• The port is on the specified card.

• The port is on the MPU and no card is specified.

VLAN pairs (1 in total) VLAN pairs and total number of VLAN pairs.

Outer VLAN 5 Inner VLAN 2 Outer VLAN ID and inner VLAN ID.

Related commands

reset igmp-snooping router-port

display igmp-snooping static-group

Use display igmp-snooping static-group to display information about static IGMP

snooping group entries.

Syntax

display igmp-snooping static-group [ group-address | source-address ] *

[ vlan vlan-id ] [ verbose ] [ slot slot-number ]

Views

Any view

8

Predefined user roles

network-admin

network-operator

Parameters

group-address: Specifies a multicast group by its IP address in the range of 224.0.1.0 to

239.255.255.255. If you do not specify a multicast group, this command displays information about

static IGMP snooping group entries for all multicast groups.

source-address: Specifies a multicast source by its IP address. If you do not specify a multicast

source, this command displays information about static IGMP snooping group entries for all multicast

sources.

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a

VLAN, this command displays information about static IGMP snooping group entries for all VLANs.

verbose: Displays detailed information about static IGMP snooping group entries. If you do not

specify the keyword, this command displays brief information about static IGMP snooping group

entries.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this

command displays information about static IGMP snooping group entries for the MPU.

Examples

# Display detailed information about static IGMP snooping group entries for VLAN 2.

<Sysname> display igmp-snooping static-group vlan 2 verbose

Total 1 entries.

VLAN 2: Total 1 entries.

(0.0.0.0, 224.1.1.1)

Attribute: local port

FSM information: dummy

Host slots (0 in total):

Host ports (1 in total):

HGE1/0/2

Table 5 Command output

Field

Description

Total 1 entries Total number of static IGMP snooping group entries.

VLAN 2: Total 1 entries Total number of static IGMP snooping group entries in VLAN 2.

(0.0.0.0, 224.1.1.1) (S, G) entry, where 0.0.0.0 in the S position means all multicast sources.

Attribute

Entry attribute:

• global port—The entry has a global port.

• local port—The entry has a port that resides on the card for which the

information is displayed.

• slot—The entry has ports that reside on other cards except the card for

which the information is displayed.

FSM information

Finite state machine information of the entry:

• delete—The entry attributes have been deleted.

• dummy—The entry is a new temporary entry.

• no info—No entry exists.

• normal—The entry is a correct entry.

9

Field

Description

Host slots (0 in total)

Slot numbers and total number of the cards that have member ports, except for

the specified card or the MPU when no card is specified.

Host ports (1 in total) Member ports and total number of member ports.

display igmp-snooping static-router-port

Use display igmp-snooping static-router-port to display static router port

information.

Syntax

display igmp-snooping static-router-port [ vlan vlan-id ] [ verbose ] [ slot

slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.

verbose: Displays detailed information about static router ports. If you do not specify this keyword,

the command displays brief information about static router ports.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this

command displays static router port information for the MPU.

Examples

# Display brief information about static router ports for VLAN 2.

<Sysname> display igmp-snooping static-router-port vlan 2

VLAN 2:

Router ports (2 in total):

HGE1/0/1

HGE1/0/2

# Display detailed information about static router ports for VLAN 2.

<Sysname> display igmp-snooping static-router-port vlan 2 verbose

VLAN 2:

Router slots (0 in total):

Router ports (2 in total):

HGE1/0/1

HGE1/0/2

Table 6 Command output

Field

Description

VLAN 2 VLAN ID.

Router slots (0 in total) Slot numbers and total number of the cards that have static router ports,

except for the specified card or the MPU when no card is specified.

10

Field

Description

Router ports (2 in total) Static router ports and total number of static router ports.

display igmp-snooping statistics

Use display igmp-snooping statistics to display statistics for the IGMP messages and

PIMv2 hello messages learned through IGMP snooping.

Syntax

display igmp-snooping statistics

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display statistics for the IGMP messages and PIMv2 hello messages learned through IGMP

snooping.

<Sysname> display igmp-snooping statistics

Received IGMP messages:

IGMP general queries: 19

DRNI: 19

IGMPv2 specific queries: 10

DRNI: 0

IGMPv3 specific queries: 0

DRNI: 0

IGMPv3 specific sg queries: 0

DRNI: 0

IGMPv1 reports: 0

DRNI: 0

IGMPv2 reports: 19

DRNI: 19

IGMPv3 reports: 0

DRNI: 0

IGMPv3 reports with right and wrong records: 0

DRNI: 0

IGMP leaves: 5

DRNI: 5

Error IGMP messages: 1

DRNI: 1

Sent IGMP messages:

IGMPv2 specific queries: 0

IGMPv3 specific queries: 0

IGMPv3 specific sg queries: 0

Received PIMv2 hello : 0

Page is loading ...

HPE JG619A Reference guide

This manual is also suitable for

HPE JG619A Reference guide

Related papers

Other documents