Bretford CFPS Assembly Instructions

CFPS

Part #031-1523

Rev. 04.22.08 CZ

Surge Protected Electrical Unit

Assembly Instructions

Qty Part# Description

1 CFPS 4 Outlet Electrical Unit

PARTS LIST

TOOLS REQUIRED

Phillips Screwdriver

Electric Drill (if necessary)

7/64" Drill Bit (if necessary)

OPTION 2

Turn unit over and locate pre-drilled

holes on wood top. Attach E-unit

through holes using screws (AA).

OPTION 1

Lay unit down and locate pre-drilled

holes. Attach E-unit through holes

using screws (AA).

If there are not pre-drilled holes, mark holes with a

pencil in desired location. Drill a 1/2" deep hole with

a 7/64" drill bit and attach E-unit with screws (AA).

NOTE:

HARDWARE LIST

Ref Qty Part# Description

AA 2 02112 #8 x 3/8" Sheet Metal Screws

BB 2 02236 #8-32 Hex Lock Nuts

(use when necessary)

CC 2 030-0302 #8-32 x 3/8" Combo Truss Screws

(use when necessary)

Bretford

11000 Seymour Avenue

Franklin Park, IL 60131

TEL: 847.678.2545

800.521.9614

FAX: 847.678.0852

800.343.1779 www.bretford.com