3
Installing H8 Control
1.
Open the App Store on the iOS/iPadOS device and search for “H8 Control”.
2.
Tap “GET” on the H8 Control screen.
This will install H8 Control on the device.
Copyrights
iPadOS is a registered trademark of Apple Inc. in the USA and other countries
iOS is a trademark or registered trademark of Cisco Systems, Inc. in the USA
and other countries, and it is used under license. App Store is a service mark
of Apple Inc.
The Bluetooth
®
word mark and logo are registered trademarks of Bluetooth
SIG, Inc., and these marks are used under license by Zoom Corporation. Other
trademarks and trade names are the property of their respective companies.
All trademarks and registered trademarks in this document are for identification
purposes only and are not intended to infringe on the copyrights of their re-
spective owners.
Introduction
H8 Control is a remote control app designed specifically for the ZOOM H8 Handy
Recorder (“the recorder” hereafter).
Recording, playback and other recorder operations can be conducted using this
app on an iOS/iPadOS device.
Note that this manual does not explain operation of the recorder itself. See the
H8 Operation Manual for detailed information about all its functions.