Installation Instructions for LED Medicine Cabinet
Note: To ensure general use of th
is product please follow the installation
s carefully. Must be installed indoors and on a suitable load bearing
. Installation should be done by a licensed contractor and/or electrician. Only
clean soft cloth should be used to clean this product.
Installation Tools Needed
Installation Instructions:
Fig
①: Unpack the "E" and "F" mounting brackets.
②: Install the "F" bracket using the "A" anchor and "B”. Make sure the "F" bracket is in the horizontal position.
③: Lift the medicine cabinet and securely place in the "F" bracket as shown in the illustration.
④: Hold the cabinet in the upright position and securely fasten the "E” bracket in the grove on top of the cabinet.
⑤: Use "A" anchor and "B" screw through the mounting hole to secure the "E" bracket to the wall.
⑥: Insert the provided shelf clips (C1/C2/D) into the round holes on both sides of the cabinet.
⑦: After installing the shelf clips, insert the glass shelve(s).
Wiring diagram for input terminal:
earth
Installation Instructions for LED Medicine Cabinet
Note: To ensure general use of th
is product please follow the installation
s carefully. Must be installed indoors and on a suitable load bearing
. Installation should be done by a licensed contractor and/or electrician. Only
clean soft cloth should be used to clean this product.
Installation Tools Needed
Installation Instructions:
Fig
①: Position the cabinet, mark the a/b/c/d mounting holes from inside onto the wall.
②: Use the marks to pre-drill holes.
③: Hammer “A” anchors into the pre-drilled holes.
④: Hold the mirror cabinet and install mounting hardware “B”, “C”, “D”, and E” as shown in the illustration.
⑤: Insert the provided shelf clips (F1/F2/G) into the round holes on both sides of the cabinet.
⑥: After installing the shelf clips, insert the glass shelve(s).
Wiring diagram for input terminal:
earth
①
b
d
②
a
φ
6
c
b
d
③
①
a
c
b
d
④
⑤
②
③
⑤
F1
G
F
⑥
⑦
A
B
E
F1
F2 G
E
F
F
E
Bluetooth (optional function)
Constant-voltage power
Defogger (optional function)
Transfer relay for Defogger
Bluetooth speaker (optional function)
Bluetooth (optional function)
Constant-voltage power
Defogger (optional function)
Transfer relay for Defogger
Bluetooth speaker (optional function)
A
C
CAUTION:
During operation of this product, never use hard or sharp objects directly against the mirror
surface, as it may result in damage and/or personal injury. Clean the product with a soft
cloth and mild detergent only. Do not use abrasives, chemical cleaners, or leave any
solutions on the surface such as soup, shampoo, etc. as they may damage the mirror.
CAUTION:
During operation of this product, never use hard or sharp objects directly against the mirror
surface, as it may result in damage and/or personal injury. Clean the product with a soft
cloth and mild detergent only. Do not use abrasives, chemical cleaners, or leave any
solutions on the surface such as soup, shampoo, etc. as they may damage the mirror.