Lexora LB2432LEDMC Installation guide

Lexora
Brand
Lexora
Model
LB2432LEDMC
Type
Installation guide

This manual is also suitable for

Installation Instructions for LED Medicine Cabinet
Note: To ensure general use of th
is product please follow the installation
instruction
s carefully. Must be installed indoors and on a suitable load bearing
wall
. Installation should be done by a licensed contractor and/or electrician. Only
a
clean soft cloth should be used to clean this product.
Installation Tools Needed
Installation Instructions:
Fig
①: Unpack the "E" and "F" mounting brackets.
Fig
②: Install the "F" bracket using the "A" anchor and "B”. Make sure the "F" bracket is in the horizontal position.
Fig
③: Lift the medicine cabinet and securely place in the "F" bracket as shown in the illustration.
Fig
④: Hold the cabinet in the upright position and securely fasten the "E” bracket in the grove on top of the cabinet.
Fig
⑤: Use "A" anchor and "B" screw through the mounting hole to secure the "E" bracket to the wall.
Fig
⑥: Insert the provided shelf clips (C1/C2/D) into the round holes on both sides of the cabinet.
Fig
⑦: After installing the shelf clips, insert the glass shelve(s).
Wiring diagram for input terminal:
Measuring tape
Level
Drill
Screwdriver
Hammer
White
Green
Black
live
earth
neutral
LUMINAIRE
MAINS SUPPLY
B A
t
⑤
Bluetooth
Bluetooth speaker
D
C2
C1
A
B
⑨
⑧
⑦
C2
C1
D
⑥
④
t
b
③
②
b
B A
b
①
t
Installation Instructions for LED Medicine Cabinet
Note: To ensure general use of th
is product please follow the installation
instruction
s carefully. Must be installed indoors and on a suitable load bearing
wall
. Installation should be done by a licensed contractor and/or electrician. Only
a
clean soft cloth should be used to clean this product.
Installation Tools Needed
Installation Instructions:
Fig
①: Position the cabinet, mark the a/b/c/d mounting holes from inside onto the wall.
Fig
②: Use the marks to pre-drill holes.
Fig
③: Hammer “A” anchors into the pre-drilled holes.
Fig
④: Hold the mirror cabinet and install mounting hardware “B”, “C”, “D”, and E” as shown in the illustration.
Fig
⑤: Insert the provided shelf clips (F1/F2/G) into the round holes on both sides of the cabinet.
Fig
⑥: After installing the shelf clips, insert the glass shelve(s).
Wiring diagram for input terminal:
Measuring tape
Level
Drill
Screwdriver
Hammer
White
Green
Black
live
earth
neutral
White
Green
Black
LUMINAIRE
MAINS SUPPLY
Bluetooth
①
a
c
b
d
②
a
φ
6
c
b
d
③
①
a
c
b
d
④
⑤
②
④
③
⑤
F1
G
F
2
⑥
⑦
A
B
C
D
E
F1
F2 G
E
F
F
F
E
E
LED Strip
Bluetooth (optional function)
Constant-voltage power
Defogger (optional function)
Transfer relay for Defogger
Bluetooth speaker (optional function)
MAIN SUPPLY
MAIN SUPPLY
LED Strip
Bluetooth (optional function)
Constant-voltage power
Defogger (optional function)
Transfer relay for Defogger
Bluetooth speaker (optional function)
ground
MAIN SUPPLY
MAIN SUPPLY
A
C
D
B
E
live
ground
neutral
live
ground
neutral
ground
CAUTION:
During operation of this product, never use hard or sharp objects directly against the mirror
surface, as it may result in damage and/or personal injury. Clean the product with a soft
cloth and mild detergent only. Do not use abrasives, chemical cleaners, or leave any
solutions on the surface such as soup, shampoo, etc. as they may damage the mirror.
CAUTION:
During operation of this product, never use hard or sharp objects directly against the mirror
surface, as it may result in damage and/or personal injury. Clean the product with a soft
cloth and mild detergent only. Do not use abrasives, chemical cleaners, or leave any
solutions on the surface such as soup, shampoo, etc. as they may damage the mirror.
Bluetooth Function of LED Medicine Cabinet
SCREEN DISPLAY AND TOUCH BUTTONS
FUNCTION AND BUTTON INSTRUCTIONS
Display:
(1) The screen and buttons will have an automatic backlit display while powered on.
(2) Press button ⑥ to control the lights on and off while the product is powered on, the light symbol will show on the
screen while the lights are on.
(3) Press button ⑥ to power on. Hold button ⑥ for 3 seconds to power off.
Time and Date Settings:
(1) When the power is on, press button ⑤ to control the anti-fog function on or off, the anti-fog symbol will
appear/disappear on the screen when the function is on/off. (The anti-fog function will turn off automatically after
running for 65 minutes.)
(2) Press ⑤ for 3 seconds to start Time and Date setting function, you will see the Hour number flashing when the time
and date are ready to be changed. By pressing button ⑤ you can change between the Hour, Minute, Month, Day and
Year numbers. Press button ① to reduce or button ② to increase the numbers while they are flashing.
NOTE: Bluetooth function must be disabled before changing settings.
Connecting the Bluetooth
(1) To connect to Bluetooth press button ④ to open the Bluetooth function. The device is ready to connect when the
screen displays “1-bt” and makes a beep sound.
(2) Next search and connect to “K3015C” from your smart device.
(3) Bluetooth connection is successful when the “1-bt” on the screen stops flashing. Now you are ready to play your
music.
NOTE: The Bluetooth function of this product supports connecting up to two devices at the same time, but one device will
be automatically paused when the other device is playing.
Bluetooth Functions
(1) To skip songs press buttons ① to return to the last song and press button ② to skip to the next song
(2) To adjust the volume press button ③ to select the volume setting. Once the volume on the screen starts flashing
press button ① to reduce the volume and press button ② to increase the volume.
(3) Press button ④ to disconnect the Bluetooth function
• Keep this product away from strong magnetic fields, electrical fields and heated appliances.
• For the best connection keep your smart device within 6-12 feet from this product without any obstructions. such as
walls or other electrical equipment.
• After disconnecting, the Bluetooth signal will not automatically reconnect.
Bluetooth
/
Anti-fog setting
  • Page 1 1
  • Page 2 2

Lexora LB2432LEDMC Installation guide

Lexora
Brand
Lexora
Model
LB2432LEDMC
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents