Pro-Ject The Classic Evo The Classic Evo Upgrades Information

Brand: Pro-Ject

Model: The Classic Evo

Type: The Classic Evo Upgrades Information

Pro-Ject The Classic Evo, with its diamond-cut aluminum sub-platter and upgraded CC Evo tonearm bearing, offers enhanced speed accuracy, reduced resonances, and frictionless movement for precise tracking. The improved sub-chassis design further minimizes vibrations and improves motor decoupling. Optional accessories like the leather mat and record clamp enhance the listening experience by damping unwanted noise and providing a secure hold for your vinyl records.

TECHNICAL INFORMATION

Changes to technical data reserved.

Page 1/2

PRO-JECT AUDIO SYSTEMS

www.project-audio.com

• Plastic sub-platter upgraded to a diamond cut aluminium sub-platter with 0.001mm tolerances (same

sub-platter as in the Vienna Philharmonic Recordplayer)

• Tonearm bearing upgraded to the same as in our CC Evo range of tonearms

• Improved, sturdier tonearm rest for less vibrations and better overall build quality

• Sub-chassis construction slightly reworked for fewer resonances and better motor decoupling

• Record clamp and leather mat are optionally available to compensate for the added cost of the alumi-

nium sub-platter and keep the MSRP the same as older The Classic SB turntables

THE CLASSIC EVO CHANGES

Changes from The Classic SB to The Classic Evo

Sub-platter:

The diamond cut aluminium sub-platter can be machined to much improved and lower tolerances and will

be a substantial upgrade to regular sub-platters. It adds more mass to the entire platter and drive system,

resulting in additional damping of noise and unwanted resonances. The improved tolerances during pro-

duction will increase overall speed accuracy. The additional mass improves short term speed stability, or

also called Wow & Flutter.

Tonearm:

The improved CC Evo tonearm bearing adds more mass, decreases resonances and enables frictionless

movement for accurate tracking. The tonearm rest looks and feels heavier and sturdier, increasing the build

quality and has less vibrations than the previous version.

Sub-chassis:

The sub-chassis construction has been slightly reworked for even fewer resonances and better motor

decoupling.

TECHNICAL INFORMATION

Changes to technical data reserved.

Page 2/2

PRO-JECT AUDIO SYSTEMS

www.project-audio.com

Sub-platter

The diamond cut aluminium sub-platter can be ma-

chined to much improved and lower tolerances and

will be a substantial upgrade to regular sub-platters.

It adds more mass to the entire platter and drive sys-

tem, resulting in additional damping of noise and un-

wanted resonances. The improved tolerances during

production will increase overall speed accuracy. The

additional mass improves short term speed stability,

or also called Wow & Flutter.

For The Classic and The Classic SB Superpack:

Sub-Platter upgrade available for 119€

Tonearm

The improved CC Evo tonearm bearing adds more

mass, decreases resonances and enables fricti-

onless movement for accurate tracking. The tonearm

rest looks and feels heavier and sturdier, increasing

the build quality and has less vibrations than the pre-

vious version.

For The Classic and The Classic SB Superpack:

Tonearm upgrade available for 249€

Clamp it & Leather it

For The Classic Evo:

Leather it optionally available for 49€

Clamp it optionally available for 99€

Upgrade Options for The Classic, The Classic SB Superpack and

The Classic Evo

Pro-Ject The Classic Evo The Classic Evo Upgrades Information

Pro-Ject The Classic Evo The Classic Evo Upgrades Information

Pro-Ject The Classic Evo The Classic Evo Upgrades Information

Related papers

Other documents