Riverside Furniture 27156 Assembly Instructions

  • Hello! I've reviewed the Assembly Instructions for the LYDIA Dining Room 27156 Display Sideboard. This document covers the assembly process, including a component list, step-by-step instructions, and door adjustment guidelines. I'm ready to answer your questions regarding the assembly and safety features described in the document.
  • What should be checked before start?
    What is the recommended surface for assembly?
    What should be used when placing hot or cold items?
    What is the purpose of the furniture tipping restraint kit?
STEP 1:
Made in Viet Nam
Components and Hardware List
Page 1 of 3
A
27156
Display Sideboard
email: info@riverside-furniture.com
LYDIA
Dining Room
Assembly Instructions
2 Set.
Furniture Tipping Restraint Kit Screw Driver
not included
Display Sideboard
1 Pc.
Handle
4 Pcs. 8 Pcs.
Round Head Bolt
Ø5/32''-32 x 1-1/8"
BCD
Warning :
- Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
- To prevent possible scratches and damage, this furniture must
be assembled on a soft surface such as a blanket or carpet.
Important Use Information: We recommend using coasters,
placemats and trivets when placing hot or cold containers
on this item. It is also recommended to quickly cleanup any
spills to minimize exposure to moisture. Doing so will prolong
the life and look of the item for many years.
Handle inside of Drawer
A
For product and personal safety, two Furniture Tipping Restraint kits have been included with this unit
which can help to minimize the risk of the unit accidentally tipping forward, if used and properly installed
per the kit manufacturer's instructions.
Made in Viet Nam
Page 2 of 3
email: info@riverside-furniture.com
LYDIA
Dining Room
Assembly Instructions 27156 Display Sideboard
STEP 2: Reattach the Handle to front of door
inside
Door
Furniture Tipping Restraint Kit
inside bag
D
C
Adjustable Leveler
3Pcs
STEP 3:
B
Door Angle Adjustment
loosen screw 1, adjust gap
with screw 2 and re-tighten
Screw 1.
Horizontal Adjustment
loosen screw 1, push hinge
arm forwards or backwards,
re-tighten screw 1 and secure
Screw 2 with a 1/4 turn
clockwise. Vertical Adjustment
loosen screw 3, adjust door
height and re-tighten screw 3.
* The doors can be adjusted in all 3 directions to create an even fit between doors on this cabinet. Follow the
appropriate directions above to adjust door(s) as necessary.
2
3
1
Made in Viet Nam
Page 3 of 3
Hinge Adjustment Steps
email: info@riverside-furniture.com
LYDIA
Dining Room
Assembly Instructions 27156 Display Sideboard
/