AestheticsWind ResistanceUV Resistance Snow Load
SUNTUF® Beehive | SUNTUF® Iron/Greca | PALRUF® Iron/Greca
DIY Corrugated sheets | Installation Guide
SUNTUF® Beehive - Product Page SUNTUF® DIY - Product Page
PALRUF® DIY - Product Page
Easy to install UV resistanceHail & impact resistant Balances shade & daylight 10 years waranty
DIY Corrugated sheets Installation Guide 2
Required tools
Ladder Measuring tapeDrill Electric screwdriver Jigsaw or Circular saw
Before installation
Do not step directly on the sheets between the purlins!
When installing roofing sheets or doing maintenance work, always use ladders or crawl
boards, supported by minimum three roof structural elements.
7m
Foam Tape Silicone Side Wall Trim
Head Wall
Trim
Accessories
Butyl Sealing Tape
Purlin spacing
Recommended safety equipment
Iron 4m
Greca 4m
SUNTUF Beehive 7m
Minimum arching radius
Before installing sheets longer than 7m
please contact your PALRAM representative.
Sheet length
SUNTUF Beehive
Self-tapping Screw
* For wood structure
Self-drilling Screw
* For metal structure
Dual Action Screw
* For wood & metal structure
Self-tapping Screw
* For wood structure
Self-drilling Screw
* For metal structure
Profile
Distance between purlins
Iron/Greca 600mm to 800mm
SUNTUF Beehive 1000mm to 1200mm
R
90o
Distance
between purlins
SUNTUF/ PALRUF Iron/ Greca
DIY Corrugated sheets Installation Guide 3
Before installation
100mm
Slope: 10%
This minimum pitch will ensure
proper water runoff and help keep
the roof panels clean.
Ensure minimum roof pitch
Installation
Foam tape
Foam tape application (optional)
Measuring and Cutting
1
2
Applying foam tape on each purlin will reduce friction and noise.
50-150mm
50-150 mm
Measure twice, cut once!
Recommended order of installation
ABC
Slope
DIY Corrugated sheets Installation Guide 4
הנקתה
Installation
Setting the first sheet
3
50-150
mm
Drilling the first sheet
4
Iron & BeehiveGreca
Top and bottom purlins
Middle Purlins
Middle Purlins
Top and bottom purlins
When fixing Suntuf Beehive
with dual action screw,
pre-drilling is only required
at the overlap corrugation.
Dual action screw
Wood screw
Metal screw
Screw scheme
Overlap
Palram Industries
Ltd.
Ramat Yohanan 30035,
Israel
Tel ► 972-4-8459900
Fax ► 972-4-8444012
E-Mail ►
Website ►
www.palram.com
SUNTUF BH
Iron 1045
Date:
December 24,
2015
Thickness
2.8-mm
Pitch
76-mm
Depth
18-mm
Cover Width
988-mm
Notes:
SUNTUF BH
Customer Approval
.
Overall Width
1045-mm
Customer:
--------------
Profile Name:
Iron 76 1045
SUNTUF ®
1045
76
18
988
29 29
R
R
R
R
Palram Industries
Ltd.
Ramat Yohanan 30035,
Israel
Tel ► 972-4-8459900
Fax ► 972-4-8444012
E-Mail ►
Website ►
www.palram.com
SUNTUF BH
Iron 1045
Date:
December 24,
2015
Thickness
2.8-mm
Pitch
76-mm
Depth
18-mm
Cover Width
988-mm
Notes:
SUNTUF BH
Customer Approval
.
Overall Width
1045-mm
Customer:
--------------
Profile Name:
Iron 76 1045
SUNTUF ®
1045
76
18
988
29 29
R
R
R
R
Greca 76
Internal Roof Purlin Fasteners position
Edge Roof Purlin Fasteners position
Trimdek
Greca 76
Internal Roof Purlin Fasteners position
Edge Roof Purlin Fasteners position
Trimdek
Leave the lateral overlap
corrugation undrilled
In case of Head wall/ Side wall trim use,
leave the marked area undrilled.
10mm
holes
DIY Corrugated sheets Installation Guide 5
Fixing the second sheet
7
Installation
Setting & Drilling the second sheet
6Repeat stages 6-7 until the pergola is fully covered
8
Fixing the first sheet
5
overlap 2 corrugations when
slope is lower than 5%.
A
B
C
D
Leave the lateral overlap
corrugation unfastened
In case of Head wall/ Side wall trim use,
leave the marked area unfastened.
A
B
C
D
In case of Head wall/ Side wall trim use,
leave the marked area unfastened.
Leave the lateral overlap corrugation
unfastened
DIY Corrugated sheets Installation Guide 6
Head Wall Trim
Side Wall Trim Universal Ridge Cap
9
10 12
Silicone
11
Installation - Finishing Accessories
Use butyl sealing tape between the sheet and the accessory.
30-50 mm
Butyl tape
Butyl tape
PALRAM INDIA PVT LTD
701, Tanishka, Near Growel’s Mall, Akurli Road,
Kandivali East, Mumbai 400101, India
Tel. +91-22-28626880
Emai. [email protected]
Web. www.palram.com
601046 - 12.2023
/
