• These linear power supply/chargers will convert a low voltage AC input to a
12VDC/24VDC output. These units are specifically designed to
provide the power needed by the most demanding security and
access control applications.
• 12VDC/24VDC selectable output.
• 16VAC or 28VAC.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid or
gel type batteries.
• Maximum charge current 500mA.
• Automatic switch over to stand-by battery.
• Fused battery protection (circuit breaker available).
• Includes battery leads.
•
LPS3AC model only:
AC Fail supervision
(Form “C” contacts).
• AC input and DC output LED indicators.
LPS3
• 12VDC or 24VDC @ 2.5 amp
supply current.
LPS3AC
• 12VDC or 24VDC @ 2.5 amp
supply current.
• AC Fail Monitoring.
LPS3, LPS3AC Linear Power Supply/Charger
Rev. DSLPS3 - A17F
Overview
Specifications
Board Dimension (approximate)
6.5”L x 3.5”W x 1.75”H
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
7.0"
4.0"
0.15"
0.15"
0.30"
0.30"
6.2"
3.2"
6.7"
3.7"
Ø0.156"
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Altronix LPS3AC Installation Instructions Manual
-
Altronix LPS3C24X220 Installation guide
-
-
-
-
-
Altronix LPS3C12X220 Quick start guide
-
Altronix AL600ULPD8CB Installation guide
-
Altronix AL802ULADAJ Installation guide
-
Altronix AL300ULXJ Installation Manuals