FILMCITY POWER SHOULDER RIG 1
POWER DSLR Camera Cage Shoulder
Rig Kit
I N S T R U C T I O N M A N U A L
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by
the applicable copyright statutes or in wring by the Publisher.
FILMCITY POWER SHOULDER RIG 2
I N T R O D U C T I O N
Our Filmcity Shoulder Rig kit meets and exceeds the requirement of DSLR users by
providing professional look production value at an affordable price.
I N T H E B O X
Please inspect the contents of your shipped package to ensure you have received all
that is pictured and listed below.
Note: If you have purchased (FC-02-P) kit, then you will receive the following:
Matte Box MB-600
Straight & Z-Bracket
Shoulder Pad
Top Handle
French and Side Flags
1 x Handle Set
Camera Base with
Quick Release
Counter Weight
2x 150mm Male
threaded Rods
Front handle
bracket clamps
2x 200mm Female
threaded Rods
2x 300mm Female
threaded Rods
Clamps For Handle Set
Front Handle
9” Cage Brackets
Front Handle Rod
HS-2 Follow Focus
Speed Crank
Gear Belt
Handle Bracket
Accessories
2x 300mm Male
threaded Rods
Top Handle
Bracket
Note: If you have purchased (FC-03-P) kit, then only you will receive the following along with the
above menoned parts:
FILMCITY POWER SHOULDER RIG 3
A S S E M B LIN G YO U R M B - 6 0 0 M AT T E BOX
Insert the french flag in to the matte box and tighten the screws. Using the same
approach, insert the side flags into the (big) slots provided in the hinges and
secure with the screws.
Insert the filter holders to your matte box as shown below.
Note: For better gripping of filter in filter holder, retighten the filter tray knob to
secure the filter properly.
Note: If the french flag( top) remain
loose even after tightening the knob
you have to slightly tighten the allen
bolt as shown in the image
FILMCITY POWER SHOULDER RIG 4
Attach knicker on conversion ring, then screw in the conversion ring on ring holder .
A S S E M B LIN G YO U R R I G K I T
Attach the quick release plate of your tripod head with base plate and tighten it
with the help of screw driver.
Now mount the camera base on fluid head and secure it properly by tightening
the knob.
FILMCITY POWER SHOULDER RIG 5
Attach the camera with quick release plate and tighten the bolt to secure
properly.
Now mount the camera onto the base plate and tighten the knob to secure it.
Insert the rod into camera base and secure it properly with the help of allen
key.
Attach the 9” cage brackets with the rods and tighten the knobs to secure.
FILMCITY POWER SHOULDER RIG 6
Now, attach the rods on the top of cage brackets in order to attach the top
handle.
Attach the straight bracket to the end of the rods and secure it properly with
the help of provided knob.
Now insert the 300mm rods into the straight bracket and tighten the knob to
secure properly.
Attach the shoulder pad and counterweight into the rods and secure it properly
with the help of provided knob.
FILMCITY POWER SHOULDER RIG 7
Attach the 150mm male rods at the front to extend it for mounting your matte
box and handles.
Note: If you have purchased (FC-03-P) kit, follow the below steps as well:
Attach gear ring to camera lens and tighten the screw.
Now insert HS -2 follow focus into the front of rods, adjust with gear ring and
tighten the knob to secure it.
FILMCITY POWER SHOULDER RIG 8
You can aach speed crank to follow focus as
per your requirement.
Attach the front handle bracket clamps with bracket, attach it with the rods and
secure it properly with the help of allen key.
Note: The front handle bracket
clamps are the ones with allen bolts.
Now insert rod into the front bracket
and secure it properly with the help of
allen key.
FILMCITY POWER SHOULDER RIG 9
Insert the handle clamp into the rods and screw the handle into the handle
clamp.
Insert the matte box in front side of rods barrel properly and tighten the knot.
Note: The front handle bracket
clamps are the ones without allen
bolts
YO U R FI L M C I T Y POWER SHOULDER RIG KIT
AL L D RE S S ED UP A N D G OO D TO G O
FILMCITY POWER SHOULDER RIG 10
WARRANTY
We oer a limited me warranty for our products. For Mechanical products we provide a 6 month
warranty & for electronic products we provide a 3 month warranty from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note that
we will not cover any shipping costs for returning the product to us. If any VAT or import dues are
applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product , or
service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover the
complete cost of sending replacement parts within the warranty period. Aer that, Nominal cost
of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
best to help you out.
For any other assistance you can reach us via email.
/
