27
Install the app to take advantage of the anti-theft and baggage alert (only Apple
iOS) function.
The app allows the user to store the weight of a piece of baggage and assign
a photo. An alarm can also be set off if the luggage scale, and the piece of
baggage with it, is removed. If the luggage scale is inside a piece of baggage, a
baggage alert is sent to the connected mobile device (only Apple iOS) within the
detection range upon arrival of the baggage at the baggage conveyor belt. The
luggage scale turns off after approx. 1 minute during which no button is pressed
or no piece of baggage is weighed.
b) Inserting battery
• 2 pieces 1.5 V batteries, size AAA, are included with the product.
• Open the battery compartment cover (1) and insert the batteries. Observe
correct polarity (+/-) as indicated in the battery compartment.
• Close the battery compartment.
• The lifetime of new batteries will be approx. 1 month if the product is switched
on (no weighing operation and alarm sound). The lifetime of the batteries
depend also on the battery quality and condition as well as the ambient
temperatures. Replace the batteries when the luggage scale LC display
shows the low battery indicator >Lo<.
c) Bluetooth
®
connection and basic settings
Before you can use all functions of the device you will have to perform some
settings and familiarize yourself with the operating instructions.
• Activate the Bluetooth
®
function on your mobile device.
• Slide the ON/OFF switch (4) to ON to turn on the luggage scale.
• Start the Voltcraft
®
Smart-Scale app on your mobile device. Tap the settings
symbol > <. The app scans for Bluetooth
®
devices and the luggage scale
appears on the display under >New Devices Found< after a few seconds. Tap
the device eld with the symbol
to register the device.
• The display shows the device prole.