Sanyo VPC-HD1010 - Xacti Camcorder

INSTRUCTION MANUAL

Xacti Library

Thank you for purchasing this product.

Please read this Instruction Manual carefully before using the Xacti Library. Make

sure to read and understand the separate booklet “SAFETY MANUAL”. Keep the

warranty and other documentation in a safe place for future reference.

About Xacti Library

i A camera that includes the Xacti Library feature allows you to connect the

camera to an external hard disk (commercially sold) and copy files from

your camera directly to the hard disk. Enjoy seeing the superior quality of

high definition images recorded with your camera on your TV.

i Check your camera’s instruction manual to see if your camera has the Xacti

Library feature.

i See “SPECIFICATIONS” on page 35 in this manual for details about which

hard disks can be connected.

i The appearance of the camera and/or external hard disk shown in this

manual’s illustrations may be different from the devices that you are using.

Symbols used in this manual

HINT Indicates further instructions or special points of practical

interest.

CAUTION Points that require special attention.

(page xx) Refer to the page indicated for detailed information.

i English

GETTING STARTED USING THE

Xacti Library

Setup

1 Connect a TV and a hard disk to the docking station, and set the

camera in the docking station.

* Please make sure that the camera and all devices are turned OFF

before proceeding.

To power outlet

Use the USB cable and the

dedicated USB converter cable

included with your camera to

connect the hard disk to the

docking station.

Use the cable included with

your camera to connect a

TV to the docking station.

Set input to “VIDEO”

Hard disk

English ii

Copy files from the card

2 Copy files from the card installed in your camera to the hard disk.

i File copying from the camera to the hard disk begins.

i When copying is complete, press the SET button.

SD

MAIN MENU

DATA TRANSFER

PLAYBACK

ALBUM

OKEXIT

OK

DATA TRANSFER

BEGIN TRANSFER

TRANSFER SETTINGS

1 Turn on the camera, TV and hard disk.

2 Select “DATA TRANSFER”,

and press the SET button.

3 Select “BEGIN TRANSFER”,

and press the SET button.

iii English

GETTING STARTED USING THE Xacti Library

Playback

3 Play back the files you copied to the hard disk.

i The rest of the playback procedure is the same as for normal camera

operation.

i When you have finished using the camera, turn it off and remove it from

the docking station.

SELECT

OK

2008.09.01 ROLL001

2008.12.24 ROLL001

PLAY

MAIN MENU

DATA TRANSFER

PLAYBACK

ALBUM

OKEXIT

1 Select “PLAYBACK”, and

press the SET button.

2 Select the desired ROLL to

play back, and press the SET

button.

1 English

CONTENTS

HOW TO ENJOY THE Xacti Library FEATURE .................................... 3

 SETUP

ASSEMBLE THE DEVICES ................................................................... 6

CONNECTIONS .................................................................................... 9

START THE Xacti Library .................................................................... 10

 COPY

COPY FILES FROM THE CARD TO THE HARD DISK ...................... 11

COPY FILES FROM THE HARD DISK TO THE CARD ...................... 12

COPY SINGLE FILES .......................................................................... 14

COPY OPERATION SETTINGS .......................................................... 15

Display the Transfer Settings Screen ........................................... 15

Specify how to treat files after they are copied ............................. 16

Copy after sorting by date ............................................................. 17

File information display setting ..................................................... 18

 PLAYBACK

PLAY HARD DISK FILES .................................................................... 19

Play back an album ...................................................................... 21

PLAY CAMERA FILES ........................................................................ 22

English 2

 ORGANIZE (ALBUM)

CREATE A NEW ALBUM .....................................................................23

Add files from other folders/rolls ....................................................25

Confirming the playback settings (slideshow settings) ..................26

EDIT AN ALBUM ..................................................................................27

Add files to an album .....................................................................27

Move album files ...........................................................................29

Remove album files .......................................................................31

DELETE AN ALBUM ............................................................................33

 APPENDICES

FORMAT HARD DISK ..........................................................................34

SPECIFICATIONS ................................................................................35

Xacti Library compatible hard disks ...............................................35

Hard disk directory configuration ...................................................36

3 English

HOW TO ENJOY THE Xacti Library

FEATURE

The Xacti Library feature is a system that allows you to save the files stored in

your camera’s card to a large-capacity hard disk—all without using a

computer.

Copying files between the camera and hard disk

made easy

You can copy files recorded with your camera to a hard disk, as well as

transfer files from the hard disk to your camera’s card.

English 4

Reproduce the high quality of captured images

Because the files from your hard disk can be output directly to your TV, you

can enjoy watching video clips without losing any of the recorded high

definition. You can also play back the files from the camera’s card.

5 English

HOW TO ENJOY THE Xacti Library FEATURE

Use the album feature to organize your files

Organizing your files into albums is a snap. It’s easy to find the files you’re

looking for to include in the album, because you select them from “rolls” you

copied to the hard disk.

HINT

i The original meaning of “roll” comes from conventional cameras, in which

rolls of film are used. In a digital camera, however, recorded files are stored

on a card (or the internal memory), and so one card (or one internal

memory) is said to comprise a virtual “roll”. For example, when copying

files by rolls, all the files from the camera are copied to the hard disk at one

time.

001 002

ALBUM

EDIT ALBUM

DELETE ALBUM

CREATE NEW ALBUM

PLAY

English 6

SETUP

ASSEMBLE THE DEVICES

You will need the following devices in order to use the Xacti Library.

Camera

To check if your camera has the Xacti Library feature, please refer to the

instruction manual that accompanied the camera.

Docking station

Use the docking station that was included with your camera.

7 English

ASSEMBLE THE DEVICES

Remote control unit

Use the remote control unit that was included with your camera.

Hard disk

The hard disk should have a USB terminal that is USB 2.0 High Speed

compatible. For more information about compatible hard disks, please see

page 34 and visit our website at: http://www.sanyo-dsc.com/

English 8

SETUP

TV

By using a full HD (high definition) compatible TV, you will be able to enjoy the

excellent image quality of video clips recorded in the full HD mode.

Others

i A connection cable between the docking station and the TV (example:

S-AV interface cable, component cable, HDMI cable, etc.) is necessary.

i A connection cable between the docking station and the hard disk

(example: USB interface cable , USB converter cable, etc.) is necessary.

9 English

CONNECTIONS

Connect all the devices.

* Please make sure that the camera and all devices are turned OFF before

proceeding.

CAUTION

Caution when disconnecting cables

i When using the Xacti Library, do not remove the camera from the docking

station, or disconnect the USB cable. If the USB cable is disconnected

while accessing the media, not only may the stored files be damaged, but it

may also become necessary to reformat the media, and in doing so, lose

all the data.

i Be sure to turn off the camera before removing it from the docking station.

By turning off the camera, you will be able to safely disconnect the drive.

To reduce spurious radiation

To power outlet

Use the USB cable and the

dedicated USB converter

cable included with your

camera to connect the hard

disk to the docking station.

Use the cable included with

your camera to connect a

TV to the docking station.

Set input to “VIDEO”

Hard disk

i Please affix the core (included).

English 10

SETUP

START THE Xacti Library

When all the necessary devices have been connected, start the Xacti Library.

The Xacti Library operation can be performed using the camera’s controls,

but it is recommended that you instead use the remote control unit while

watching your TV screen. The following procedure is for when using the

remote control unit.

1 Turn on the devices in the

following order: TV→hard

disk→camera.

h When the camera is turned on,

the Xacti Library Main Menu

appears.

DATA TRANSFER:

Copy files (pages 11 and 12).

PLAYBACK:

Play back files (pages 19 and 22).

ALBUM:

Create and edit albums as well as

play them back (pages 21 and 23).

h If the hard disk is being used for

the first time with the Xacti

Library, a screen confirming that

you wish to create a library

appears. In this case, proceed to

step 2.

2 Select “YES”, and press the SET button.

h A library is created, and the Main Menu appears.

HINT

i If your hard disk is one that can turn ON/OFF automatically, it will do so

when the camera is turned ON/OFF.

OKEXIT

MAIN MENU

DATA TRANSFER

PLAYBACK

ALBUM

11 English

COPY

COPY FILES FROM THE CARD TO

THE HARD DISK

Copy files from the card installed in your camera to the hard disk.

1 Start Xacti Library (page 10).

2 Select “DATA TRANSFER” from

the Main Menu, and press the

SET button.

h The Data Transfer Screen

appears.

h Pressing the MENU button will

return you to the Main Menu.

3 Select “BEGIN TRANSFER”, and

press the SET button.

h File copying begins.

h When copying is complete, press

the SET button.

OK

DATA TRANSFER

BEGIN TRANSFER

TRANSFER SETTINGS

SD

English 12

COPY

COPY FILES FROM THE HARD

DISK TO THE CARD

Copy files from the hard disk to the card installed in your camera.

1 Start Xacti Library (page 10).

2 Select “DATA TRANSFER” from

the Main Menu, and press the

SET button.

h The Data Transfer Screen

appears.

3 Select “TRANSFER SETTINGS”

and press the SET button.

h The Transfer Settings Screen

appears.

4 Select “FROM→TO”, and press

the SET button.

h The screen to set the transfer

direction appears.

HARD DISK→CARD:

Copy files from the hard disk to the

card.

CARD→HARD DISK:

Copy files from the card to the hard

disk.

OK

DATA TRANSFER

BEGIN TRANSFER

TRANSFER SETTINGS

SD

OK

INFO

FROM ➞ TO

SORT BY DATE

DELETE AFTER TRANSFER

TRANSFER SETTINGS

OK

FROM ➞ TO

CARD ➞ HARD DISK

HARD DISK ➞ CARD

13 English

COPY FILES FROM THE HARD DISK TO THE

CARD

5 Select “HARD DISK→CARD”, and press the SET button.

h You are returned to the Transfer Settings Screen.

h The screen to select the roll you wish to copy appears.

6 Select the desired roll, and press

the SET button.

h The Data Transfer Screen

appears.

7 Select “BEGIN TRANSFER”, and

press the SET button.

h File copying begins.

h When copying is complete, press

the SET button.

HINT

i When you select “DATA TRANSFER” on the Main Menu and press the

SET button, the data transfer direction automatically becomes

“CARD→HARD DISK”.

OK

DATA TRANSFER

BEGIN TRANSFER

TRANSFER SETTINGS

SD

English 14

COPY

COPY SINGLE FILES

Copy individual files while using the TV or the monitor to confirm the file.

1 While the Playback Screen is displayed, press the MENU button,

select “COPY” from the 2 menu of the NORMAL Mode Playback

Menu, and press the SET button.

h The Copy Screen appears.

HARD DISK→CARD:

Copy files from the hard disk to the

card.

CARD→HARD DISK:

Copy files from the card to the hard

disk.

2 Select the desired copy direction,

and press the SET button.

3 Display the file you wish to copy.

4 Select “COPY”, and press the SET button.

h Copying begins.

HINT

To delete files

i The procedure to delete files is performed from the Playback Screen. The

procedure to delete files is the same as that for deleting files from the

camera.

i When copying files from the card to the hard disk, you can select to have

the original files deleted at the same time (page 16).

CARD ➞ HARD DISK

HARD DISK ➞ CARD

COPY

OK

15 English

COPY OPERATION SETTINGS

Specify the copy direction, as well as how files are treated after they are

copied.

Display the Transfer Settings Screen

1 Start Xacti Library (page 10).

2 Select “DATA TRANSFER” from

the Main Menu, and press the

SET button.

h The Data Transfer Screen

appears.

3 Select “TRANSFER SETTINGS”

and press the SET button.

h The Transfer Settings Screen

appears.

OK

DATA TRANSFER

BEGIN TRANSFER

TRANSFER SETTINGS

SD

OK

INFO

FROM ➞ TO

SORT BY DATE

DELETE AFTER TRANSFER

TRANSFER SETTINGS

English 16

COPY

Specify how to treat files after they are copied

After copying a file, specify whether or not it will be deleted.

1 Display the Transfer Settings Screen (page 15).

2 Select “DELETE AFTER

TRANSFER”, and press the SET

button.

h The screen to select whether or

not to delete the original file after

copying appears.

3 Select the desired option, and

press the SET button.

h You are returned to the Transfer

Settings Screen.

HINT

i The setting to delete the original file after copying can be made only when

copying files from the card to the hard disk. When copying files from the

hard disk to the card, this option is not available.

OK

DO NOT DELETE

DELETE

DELETE AFTER TRANSFER

Page is loading ...

Sanyo VPC-HD1010 - Xacti Camcorder - 1080i User manual

This manual is also suitable for

Sanyo VPC-HD1010 - Xacti Camcorder - 1080i User manual

Related papers

Other documents