SGM Giotto 1500 User manual

Brand: SGM

Model: Giotto 1500

Category: Stroboscopes & disco lights

Type: User manual

GB SGM

Giotto 1500 User’s Manual 1.02

- 1 -

Table of Contents

YMBOLS

SED

................................................................................................................. 2

HANGES

HIS

ANUAL

.................................................................................................... 2

ENERAL

ARNINGS

........................................................................................................... 3

ENERAL

ARRANTY

ONDITIONS

............................................................................................ 4

NTRODUCTION

............................................................................................................................ 6

1.1

AIN FEATURES

................................................................................................................................. 6

SPOT

ONFIGURATION

................................................................................................................................................7

WASH

ONFIGURATION

...............................................................................................................................................9

PROFILE

CONFIGURATION

.........................................................................................................................................11

DIGITAL

CONFIGURATION

...........................................................................................................................................15

1.2

CCESSORIES

.................................................................................................................................. 17

1.3

LECTRICAL

PECIFICATIONS

............................................................................................................... 18

1.4

ECHANICAL FEATURES

...................................................................................................................... 19

NSTALLATION

............................................................................................................................20

2.1

QUIPMENT

..................................................................................................................................... 20

2.2

OWER CABLE CONSTRUCTION

.............................................................................................................. 20

2.3

NSTALLING THE FIXTURE ON A SUPPORT STRUCTURE

................................................................................. 21

2.4

OSITIONING THE FIXTURE

.................................................................................................................. 21

2.5

ITTING CLAMPS

............................................................................................................................... 22

2.6

ONSTRUCTION OF THE SIGNAL CABLE

.................................................................................................... 23

ABLES CONNECTIONS

.............................................................................................................................................23

2.7

ONSTRUCTION OF THE DMX TERMINATION

............................................................................................. 24

2.8

IRELESS

DMX ............................................................................................................................... 24

2.9

RDM

EMOTE

EVICE

ANAGEMENT

).................................................................................................. 25

2.10

RS-232

ONNECTION

....................................................................................................................... 26

2.11

THERNET

ARTNET CONNECTION

.......................................................................................................... 26

2.12

IRMWARE UPDATING

........................................................................................................................ 26

2.13

CCESS TO INTERNAL COMPONENTS

....................................................................................................... 27

ODULE CHANGE

...............................................................................................................................................................28

NSTALLING

REPLACING THE LAMP

.......................................................................................................................31

AMP ALIGNMENT

.....................................................................................................................................................32

Installing / replacing Gobos .....................................................................................................................................33

SPOT

PROFILE

CONFIGURATION

............................................................................................................................33

NSTALLING

REPLACING

EFLECTOR

............................................................................................................................34

NSTALLING

REPLACING

NIMATION WHEEL

..........................................................................................................34

SPOT

CONFIGURATION

...............................................................................................................................................34

NSTALLING

REPLACING THE COLOR FILTERS

.........................................................................................................35

SPOT

ONFIGURATION

..............................................................................................................................................35

WASH

CONFIGURATION

..............................................................................................................................................35

EPLACING LENS FRONT

...........................................................................................................................................36

ICRO

OMPUTER

ONTROL

........................................................................................................37

3.1

ICROCOMPUTER

“C

ONTROL

”.............................................................................................................. 37

3.2

ONGLIFE RECHARGEABLE BUFFER BATTERY

.............................................................................................. 37

3.3

AVIGAZIONE ALL

’

INTERNO DEL MENU

.................................................................................................... 37

3.4

TRUCTURE OF THE MENU

................................................................................................................... 38

SPOT

CONFIGURATION

...............................................................................................................................................38

WASH

CONFIGURATION

..............................................................................................................................................41

PROFILE

CONFIGURATION

.........................................................................................................................................44

DIGITAL

CONFIGURATION

...........................................................................................................................................47

3.5

ENU

ESCRIPTION

.......................................................................................................................... 50

DMX SETUP .............................................................................................................................................................50

ARTNET SETUP.......................................................................................................................................................53

PAN-TILT SETUP...................................................................................................................................................54

OPERATING SETUP ................................................................................................................................................57

DISPLAY SETUP.....................................................................................................................................................59

SGM GB

User’s manual 1.02 Giotto 1500

- 2 -

STATISTIC .............................................................................................................................................................60

SETTING..................................................................................................................................................................61

TEST........................................................................................................................................................................61

RESERVED ...............................................................................................................................................................62

TEMPERATURE.........................................................................................................................................................62

VERSION..................................................................................................................................................................62

3.6

RROR

ESSAGES

............................................................................................................................. 63

AINTENANCE

............................................................................................................................64

4.1

RDINARY MAINTENANCE

.................................................................................................................... 64

UFFER

ATTERY

EPLACEMENT

..............................................................................................................................66

AMP

EPLACEMENT

.................................................................................................................................................66

ONTROL CHANNELS

....................................................................................................................67

SPOT

CONFIGURATION

...............................................................................................................................................67

WASH

CONFIGURATION

..............................................................................................................................................78

PROFILE

CONFIGURATION

.........................................................................................................................................83

DIGITAL

CONFIGURATION

...........................................................................................................................................92

ONVERSION TABLE DA VALORI DMX A TEMPI MSPEED

............................................................ 99

GB SGM

Giotto 1500 User’s Manual 1.02

- 3 -

Symbols Used

This manual uses graphic symbols to emphasize any hazards during the operation work described.

 THIS SYMBOL INDICATES A GENERAL RISK

 THIS SYMBOL INDICATES ELECTRIC SHOCK RISK

 THIS SYMBOL INDICATES A HOT SURFACE

 THIS SYMBOL MEANS “DO NOT PLACE THE UNIT ON INFLAMMABLE PARTS OR MATERIAL”

 THIS SYMBOL INDICATES THAT THE MINIMUM DISTANCE BETWEEN THE FIXTURE AND

THE SURFACE TO BE LIT MUST BE NO LESS THAN 1.5 METRES.

Changes to this manual

SGM has an on-going product development policy, so the information printed in this manual may not be

completely up to date.

If any doubts arise regarding the topics covered in this manual or should any further help be required, our

online services ( www.sgm.it ) are available 24 hours a day. In the FAQ section of the technical assistance

zone, answers can be found to numerous common queries: fixtures, firmware and manuals can also be

downloaded whenever required.

1.02 12/03/2009 SGM Update

1.01 10/01/2008 SGM Update

1.00 01/10/2008 SGM Documento Iniziale

Revision Date Author Description

SGM GB

User’s manual 1.02 Giotto 1500

- 4 -

General Warnings

Read the instructions in this handbook carefully, as they give important information regarding

safety during installation, use and maintenance.

Be sure to keep this instruction manual with the fixture, in order to consult it in the

future. If the fixture is sold or given to another operator, make certain he or she also

receives the manual, to be able to read about its operation and follow the relative

instructions.



THIS UNIT IS NOT FOR HOME USE, ONLY PROFESSIONAL APPLICATIONS



AFTER HAVING REMOVED THE PACKAGING, CHECK THAT THE FIXTURE IS NOT DAMAGED

IN ANY WAY.IF IN DOUBT, DON'T USE IT AND CONTACT AN AUTHORIZED SGM

TECHNICAL SERVICE CENTRE.



PACKAGING MATERIAL (PLASTIC BAGS, POLYSTYRENE FOAM, NAILS, ETC.) MUST NOT BE

LEFT WITHIN CHILDREN'S REACH, AS IT CAN BE DANGEROUS.



THIS FIXTURE MUST ONLY BE OPERATED BY ADULTS.DO NOT ALLOW CHILDREN TO

TAMPER OR PLAY WITH IT.



ELECTRICAL WORK NECESSARY FOR INSTALLING THE FIXTURE MUST BE CARRIED OUT

BY A QUALIFIED ELECTRICIAN OR EXPERIENCED PERSON.



NEVER USE THE FIXTURE UNDER THE FOLLOWING CONDITIONS:

o IN PLACES SUBJECT TO EXCESSIVE HUMIDITY

o IN PLACES SUBJECT TO VIBRATIONS OR BUMPS.

o IN PLACES WITH A TEMPERATURE OF OVER 45°C OR LESS THAN 2°C



PROTECT THE FIXTURE FROM EXCESSIVE DRYNESS OR HUMIDITY (IDEAL CONDITIONS

ARE BETWEEN 35% AND 80%).



DO NOT DISMANTLE OR MODIFY THE FIXTURE.



MAKE CERTAIN THAT NO INFLAMMABLE LIQUIDS, WATER OR METAL OBJECTS ENTER THE

FIXTURE.



THE MINIMUM DISTANCE BETWEEN THE FIXTURE AND THE SURFACE TO BE LIT MUST BE

NO LESS THAN 1.5 METRES



SHOULD ANY LIQUID BE SPILLED ON THE FIXTURE, DISCONNECTED THE POWER SUPPLY

TO THE FIXTURE IMMEDIATELY.



IN THE EVENT OF SERIOUS OPERATING PROBLEMS, STOP USING THE FIXTURE

IMMEDIATELY AND EITHER CONTACT THE NEAREST SGM SALES POINT FOR A CHECK OR

CONTACT THE MANUFACTURER DIRECTLY.



DO NOT OPEN THE FIXTURE -THERE ARE NO USER SERVICEABLE PARTS INSIDE.



NEVER TRY TO REPAIR THE FIXTURE YOURSELF.REPAIRS BY UNQUALIFIED PEOPLE

COULD CAUSE



DAMAGE OR FAULTY OPERATION.CONTACT YOUR NEAREST AUTHORIZED SERVICE

CENTRE.



WHEN CARRYING OUT ANY WORK, ALWAYS COMPLY SCRUPULOUSLY WITH ALL THE

NORMS (PARTICULARLY REGARDING SAFETY) CURRENTLY IN FORCE IN THE COUNTRY IN

WHICH THE FIXTURE'S BEING USED.

ALWAYS INSIST ON ORIGINAL SPARE PARTS BEING FITTED

GB SGM

Giotto 1500 User’s Manual 1.02

- 5 -

General warrenty conditions

 The unit is guaranteed for 24 months from the date of purchase against manufacturing material defects.

 Breakdown caused by carelessness and improper use of the fixture is excluded.

 The guarantee is no longer valid if the unit has been tampered with or repaired by unauthorized personnel.

 Replacement of the fixture is not foreseen by the guarantee.

 External parts, knobs, switches, removable parts and lamps are excluded from the guarantee

 Transport costs and related risks are borne by the fixture’s owner.

 The guarantee is valid to all effects only on presentation of the guarantee certificate to the manufacturer or

the nearest SGM technical assistance centre.

 Always quote the unit’s serial number and model when contacting your reseller for information or

assistance.

DISPOSING OF THIS PRODUCT

SGM products are supplied in compliance with Directive 2002/96/EC of the European

Parliament and of the Council of the European Union on WEEE (Waste Electrical and

Electronic Equipment), as amended by Directive 2003/108/EC, where applicable.

Help preserve the environment! Ensure that this product is recycled at the end of its

life. Your supplier can give details of local arrangements for the disposal of SGM

products.

Protect the environment: don't throw packing material into your garbage can return it to your SGM

retailer or take it to the nearest special waste collection point.

SGM GB

User’s manual 1.02 Giotto 1500

- 6 -

1. I

NTRODUCTION

1.1 Main features

The new SGM Giotto 1500 comes with a 1200W lamp that has the luminous power of 1400W.

And increased luminous intensity is just one of the new features in a series manufactured using

technology which opens up enormous possibilities for greater use of moving head fixtures.

Rather than a range of products, the Giotto 1500 is an ingenious expandable modular

system, which enables each individual fixture to be configured with the exclusive

characteristics of different instruments.

Di volta in volta, secondo le necessità, il creativo può decidere di personalizzare la stessa

macchina e renderla un proiettore Wash, Spot, Profile o Digital semplicemente

intercambiando, negli spazi all'interno, i moduli rimovibili in cui sono state suddivise tutte

le funzioni ottiche.

Each fixture’s head is ready-built to host three of the seven available modules (except Wash

configuration, which has two).Once the chosen version’s modules are assembled, fixture’s

electronics and software will identify them and automatically adapt to suit them.

GIOTTO 1500 CONFIGURATIONS

INTERCHANGEABLE MODULE

CMY

MODULE

REFLECTOR

Pan e Tilt

Electrical Characteristics

Set up

Input

Consumption

Dimension and Weight

Lenses

INTERCHANGEABLE MODULE

Lamp

GB SGM

Giotto 1500 User’s Manual 1.02

- 7 -

SPOT

ONFIGURATION

ENSES

 Spot front lens - Digital, Spot, Profile configuration

ZOOM

FOCUS

ODULE

 Linear frost

 1 rotating prism (4 facets)

 1 fixed overlapping prism (5 facets)

 Motorized zoom (12°- 36°)

 Motorized focus

 Shutter

 Strobe 1-12 flashes/second, also with music sync

SPOT

ODULE

 Customizable and indexable colour wheel: 6 colours + white

Colour change with or without music sync and/or blackout

Rainbow color

2-tone beams

UV filter

 2 customizable gobo wheels: 6 rotating indexable gobos (16-bit)

Gobo change with or without music sync and/or with blackout

 Linear iris diaphragm

 Animation wheel (interchangeable); 360° rotation and 180° revolution

CMY

ODULE

 Advanced CMY colour mixing

 Linear CTO filter

 Linear dimmer

EFLECTOR

 Faceted reflector

AMP

 MSR GOLD 1200 FastFit - adjustable from 900W to 1400W (6.300°k)

Compatible MRS GOLD 1500 FastFit (6.400°K)

 Average lamp life 750 hr.

 Fast restrike

 Remote lamp on/off via DMX.

 Lamp power reduction in the event of overheating

 Lamp elapsed time and strike counter

SGM GB

User’s manual 1.02 Giotto 1500

- 8 -

ILT

 530° Pan (4 sec.).

 250° Tilt (3.4 sec.).

 Pan / Tilt Lock; electronic Pan / Tilt unlocking.

 Pan/Tilt w. 8/16 bit resolution

 Automatic Pan/Tilt repositioning

NPUT

 DMX 512 or RS 232 input signal

 35 DMX channels - Spot configuration

 Ethernet interface (ART-NET protocol)

 Wireless DMX interface fitted as standard

 RDM protocol implemented on DMX (monitoring of internal parameters)

ETTING

 Settings via on-board microcomputer viewable on display (even with fixture off)

 Display “flip” function (rotates through 180°)

 Adjustable display brightness

 Fixture elapsed time indicator

 On-board temperature sensors (base, power, one for each module)

 Total fixture software update via DMX

 Graphic display (128 x 64)

LECTRIC SPECIFICATION

 Power supply with PFC (universal 90÷245V 50/60Hz); protected against 400V

 Electronic Ballast.

ONSUMPTION

 Max consumption: 2,000 W

 Automatic energy saving in the event of blackout use

IMENSIONS



D): 79

x 48 x 55 cm

EIGHT

 47 Kg - Spot configuration

GB SGM

Giotto 1500 User’s Manual 1.02

- 9 -

WASH

ONFIGURATION

ENSES

 Fresnel front lens - Wash Configuration

 Anti-halo PC front lens - Wash configuration

 Super wide front lens - Wash Configuration

WASH

ODULE

 Motorized zoom (6°- 40°)

 Shutter

 Strobe 1-12 flashes/second, also with music sync

 Customizable colour wheel: 4 colours + white

Colour change with or without music sync

Rainbow colour

 Frost lens

 Linear iris diaphragm

 Adjustable indexable beam shaper (0° to 180°)

Linear hard/soft edge adjustment of the beam shaper and iris

diaphragm.

CMY

ODULE

 Advanced CMY colour mixing

 Linear CTO filter

 Linear dimmer

EFLECTOR

 Faceted reflector

AMP

 MSR GOLD 1200 FastFit - adjustable from 900W to 1400W (6.300°k)

Compatible MRS GOLD 1500 FastFit (6.400°K)

 Average lamp life 750 hr

 Fast restrike

 Remote lamp on/off via DMX.

 Lamp power reduction in the event of overheating

 Lamp elapsed time and strike counter

ILT

 530° Pan (4 sec.).

 250° Tilt (3.4 sec.).

 Pan / Tilt Lock; electronic Pan / Tilt unlocking.

 Pan/Tilt w. 8/16 bit resolution

 Automatic Pan/Tilt repositioning

NPUT

 DMX 512 or RS 232 input signal

 20 DMX channels - Wash configuration

 Ethernet interface (ART-NET protocol)

 Wireless DMX interface fitted as standard

 RDM protocol implemented on DMX (monitoring of internal parameters)

SGM GB

User’s manual 1.02 Giotto 1500

- 10 -

ETTINGS

 Settings via on-board microcomputer viewable on display (even with fixture off)

 Display “flip” function (rotates through 180°)

 Adjustable display brightness

 Fixture elapsed time indicator

 On-board temperature sensors (base, power, one for each module)

 Total fixture software update via DMX

 Graphic display (128 x 64)

LECTRIC

PECIFICATION

 Power supply with PFC (universal 90÷245V 50/60Hz); protected against 400V

 Electronic Ballast.

ONSUMPTION

 Max consumption: 2000 W

 Automatic energy saving in the event of blackout use

IMENSIONS

 (HxLxD): 79 x 48 x 55 cm

EIGHT

 45 kg - Wash configuration

GB SGM

Giotto 1500 User’s Manual 1.02

- 11 -

PROFILE

CONFIGURATION

ENSES

 Spot front lens - Digital, Spot, Profile configuration

ZOOM

FOCUS

ODULE

 Linear frost

 1 rotating prism (4 facets)

 1 fixed overlapping prism (5 facets)

 Motorized zoom (12°- 36°)

 Motorized focus

 Shutter

 Strobe 1-12 flashes/second, also with music sync

PROFILE

ODULE

 Customizable and indexable colour wheel: 6 colours + white.

Colour change with or without music sync and/or blackout

Rainbow colour

2-tone beams

UV filter

 1 customizable gobo wheel: 6 rotating indexable gobos (16 bit)

Gobo change with or without music sync and/or with blackout

 Linear iris diaphragm

 4-blade beam shaker

180° blade rotation

Closable to full blackout

CMY

ODULE

 Advanced CMY colour mixing

 Linear CTO filter

 Linear dimmer

EFLECTOR

 Faceted reflector

AMP

 MSR GOLD 1200 FastFit - adjustable from 900W to 1400W (6.300°k) Compatible MRS GOLD 1500

FastFit (6.400°K)

 Average lamp life 750 hr.

 Fast restrike

 Remote lamp on/off via DMX.

 Lamp power reduction in the event of overheating

 Lamp elapsed time and strike counter

ILT

 530° Pan (4 sec.).

 250° Tilt (3.4 sec.).

 Pan / Tilt Lock; electronic Pan / Tilt unlocking.

 Pan/Tilt w. 8/16 bit resolution

 Automatic Pan/Tilt repositioning

SGM GB

User’s manual 1.02 Giotto 1500

- 12 -

NPUT

 DMX 512 or RS 232 input signal

 35 DMX channels - Profile configuration

 Ethernet interface (ART-NET protocol)

 Wireless DMX interface fitted as standard

 RDM protocol implemented on DMX (monitoring of internal parameters)

ETTINGS

 Settings via on-board microcomputer viewable on display (even with fixture off)

 Display “flip” function (rotates through 180°)

 Adjustable display brightness

 Fixture elapsed time indicator

 On-board temperature sensors (base, power, one for each module)

 Total fixture software update via DMX

 Graphic display (128 x 64)

LECTRIC

PECIFICATION

 Power supply with PFC (universal 90÷245V 50/60Hz); protected against 400V

 Electronic Ballast.

ONSUMPTION

 Max consumption: 2,000 W

 Automatic energy saving in the event of blackout use

IMENSIONS

 (HxLxD): 79 x 48 x 55 cm

EIGHT

 47 Kg - Profile configuration

GB SGM

Giotto 1500 User’s Manual 1.02

- 13 -

ENSES

 Beam front lens - Beam Configuration

BEAM

ODULE

 Motorized zoom/focus (6°-12°)

 Shutter

 Strobe 1-12 flashes/second, also with music sync

 Customizable and indexable colour wheel: 6 colours + white.

Colour change with or without music sync and/or blackout

Rainbow colour

2-tone beams

UV filter

 Frost lens

 Linear iris diaphragm

 1 customizable gobo wheel: 6 rotating indexable gobos (16 bit)

Gobo change with or without music sync and/or with blackout

 1 rotating prism (4 facets)

 1 rotating indexable animation wheel

CMY

ODULE

 Advanced CMY colour mixing

 Linear CTO filter

 Linear dimmer

EFLECTOR

 Narrow beam reflector

AMP

 MSR GOLD 1200 FastFit - adjustable from 900W to 1400W (6.300°k)

Compatible MSR GOLD 1500 FastFit (6.400°K)

 Average lamp life 750 hr.

 Fast restrike

 Remote lamp on/off via DMX.

 Lamp power reduction in the event of overheating

 Lamp elapsed time and strike counter

ILT

 530° Pan (4 sec.).

 250° Tilt (3.4 sec.).

 Pan / Tilt Lock; electronic Pan / Tilt unlocking.

 Pan/Tilt w. 8/16 bit resolution

 Automatic Pan/Tilt repositioning

NPUT

 DMX 512 or RS 232 input signal

 20 DMX channels - Beam configuration

 Ethernet interface (ART-NET protocol)

 Wireless DMX interface fitted as standard

 RDM protocol implemented on DMX (monitoring of internal parameters)

SGM GB

User’s manual 1.02 Giotto 1500

- 14 -

ETTINGS

 Settings via on-board microcomputer viewable on display (even with fixture off)

 Display “flip” function (rotates through 180°)

 Adjustable display brightness

 Fixture elapsed time indicator

 On-board temperature sensors (base, power, one for each module)

 Total fixture software update via DMX

 Graphic display (128 x 64)

LECTRIC

PECIFICATION

 Power supply with PFC (universal 90/245V 50/60Hz); protected against 400V

 Electronic Ballast.

ONSUMPTION

 Max consumption: 2,000 W

 Automatic energy saving in the event of blackout use

IMENSIONS

 79 x 48 x 55 cm

EIGHT

 43 Kg - Beam configuration

GB SGM

Giotto 1500 User’s Manual 1.02

- 15 -

DIGITAL

CONFIGURATION

ENSES

Spot front lens - Digital, Spot, Profile configuration

DIGITAL

ZOOM

FOCUS

MODULE

 Linear frost

 1 rotating prism (4 facets)

 1 fixed prism (5 facets)

 Motorized zoom (10°- 30°)

 Motorized focus

 Shutter

 Strobe 1-12 flashes/second, also with music sync

DIGITAL

MODULE

 2 customizable colour wheels: 6+5 colours + white

Colour change with or without music sync and/or blackout

Rainbow color

2-tone beams

 High efficency DLP® chip cooling system for maximum light output

performance

Special DLP® chip light engine exclusively designed for professional

lamp used in the entertaiment lighting with high CRI

 Customizable *.avi-mpeg4 format video clip library

Customizable *.bmp or *.jpg format image library

 Library updating via WiFi (wireless)

 1024x768 pixel image resolution obtained with 0,7"" XGA DLP® chip

80 GB Hard Disk

 2 simultaneous layers

Effects for each layer: rotation and indexing, digital zoom, mirroring

 Global effects: digital iris, indexable digital beam shaper, 13 crossfade

effects between layers, brightness and contrast, black and white

masking effect, V-H mirroring

CMY

ODULE

 Advanced CMY colour mixing

 Linear CTO filter

 Linear dimmer

EFLECTOR

 Narrow beam reflector

AMP

 MSR GOLD 1200 FastFit - adjustable from 900W to 1400W (6.300°k)

Compatible MRS GOLD 1500 FastFit (6.400°K)

 Average lamp life 750 hr.

 Fast restrike

 Remote lamp on/off via DMX.

 Lamp power reduction in the event of overheating

 Lamp elapsed time and strike counter

SGM GB

User’s manual 1.02 Giotto 1500

- 16 -

ILT

 530° Pan (4 sec.).

 250° Tilt (3.4 sec.).

 Pan / Tilt Lock; electronic Pan / Tilt unlocking.

 Pan/Tilt w. 8/16 bit resolution

 Automatic Pan/Tilt repositioning

NPUT

 DMX 512 or RS 232 input signal

 55 DMX channels - Digital configuration

 Ethernet interface (ART-NET protocol)

 Wireless DMX interface fitted as standard

 RDM protocol implemented on DMX (monitoring of internal parameters)

ETTINGS

 Settings via on-board microcomputer viewable on display (even with fixture off)

 Display “flip” function (rotates through 180°)

 Adjustable display brightness

 Fixture elapsed time indicator

 On-board temperature sensors (base, power, one for each module)

 Total fixture software update via DMX

 Graphic display (128 x 64)

LECTRIC SPECIFICATION

 Power supply with PFC (universal 90÷245V 50/60Hz); protected against 400V

 Electronic Ballast.

ONSUMPTION

 Max consumption: 2,000 W

 Automatic energy saving in the event of blackout use

IMENSIONS

 (HxLxD): 79 x 48 x 55 cm

EIGHT

 45 Kg - Digital configuration

GB SGM

Giotto 1500 User’s Manual 1.02

- 17 -

1.2 Accessories

ORREDO

 Manuale di istruzione cod: M001281

 Ganci Fast-Lock cod: G000035

 Connettore XLR 5 poli femmina cod: P150102

 Connettore XLR 5 poli maschio cod: S050067

 Antenna Wireless cod: A020001

 Lampada MSR GOLD 1200 FAST FIT (6300°K) cod: L010251

 Cavo di sicurezza dia. 4 cod: A080035

Only for Wash configuration:

 Lente Fresnel cod: 2101641

 Lente super wide cod: 2101642

PTIONAL

(

A RICHIESTA

 Modulo Gobo cod: 0202535

 Modulo Zoom/Focus cod: 0202536

 Modulo Profile cod: 0202537

 Modulo Wash cod: 0202539

 Reflector normale cod: . . . . . . .

 Reflector concentrata cod: . . . . . . .

 Lampada MSR GOLD 1500 FAST FIT (6400°K) cod: . . . . . . .

 Flight case singolo cod: 0061856

SGM GB

User’s manual 1.02 Giotto 1500

- 18 -

1.3 Electrical Specifications

DANGER!!

1 CLASS FIXTURE, GROUND NEEDED!

POWER REQUIREMENTS: Universal 90V-245 V 50Hz,60Hz.

POWER ABSORBED: Max 1980W@230V 50Hz

PROTECTION FUSES: 25 Amp Magnetothermic protection

ADDITIONAL ELECTRICAL PROTECTIONS

In addition to the magnetothermic protection, Giotto 1500 is equipped with sophisticated electronic

systems able to protect the projector from overtensions or dangerous falls of tension, so as not to

find electronic cards damaged as usually happens in those cases. The electronic ballast, installed

as standard equipment, allows the projector to be used in a very versatile way with any power

supply included among 90-240 Volts 50 or 60 Hz, however exposing Giotto 1500 to the most

common dangers in the electric plants all over the world (detachment of the neutral wire or

floating low tensions). This is why SGM focused on developing a system able to protect Giotto 1500

from the most common problems about electric plans, making everything clear to the last user.

The protections are:

1. Protections against the overvoltage.

In case of power supply over 280 Vrms, due to the neutral detachment, the internal protection

detects the overvoltage preventing the fixture’s switching on. The display, powered by the internal

battrey, will show the error message "POWER OVERVOLTAGE"

2. Protections against the low voltage.

This second case involves all those countries where the power supply is 100-120Volts. In this second

case we can meet two different situations:

 In the first situation, we have a fixture already powered at 100 Volts and, for some reasons, the

power supply lowers under 80 Volts. In this case, Giotto 1500 detects the low voltage but keeps

on working normally. If this situation lasts for a long time, then the internal temperatures will

increase until the temperature protections won’t stop the internal powering.

 In the second situation, Giotto 1500 is not yet powered and, by swithcing on the fixture, it

immediately detects that the voltage is already under 80 Volts. In this case, the internal

protection will provide to lock the fixture immediately.

LAMP SPECIFICATIONS

Giotto 1500 is fitted with Philips MSR GOLD 1200 fast fit lamp.

This lamp is able to generate a color temperature of 6300°K, alternatively the same lamp is

available but with color temperature of 6000°K with a life of 750h.

The lamp is hot restrike, thanks to its electronic ballast, Giotto 1500 can have this function as

standard.

Lamp: MSR GOLD 1200 FAST FIT MSR GOLD 1500 FAST FIT

(6300°K) (6400°k) – compatibile -

 Luminous flux: 95000 Lumen 120000 Lumen

 Color temperature: 6300°K 6000°K

 Luminous efficacy: 80 lm/W 82 lm/W

 Average life (50%) 750 H 750 H

 CAP/Base PGJX50 (FastFit) PGJX50 (FastFit)

GB SGM

Giotto 1500 User’s Manual 1.02

- 19 -

1.4 Mechanical features

BODY: Alluminum moldings and Termhopolicarbonate plastic covers

WEIGHT (SPOT – PROFILE CONFIGURATION): 47 Kg

WEIGHT (WASH – DIGITAL CONFIGURATION): 45 Kg

SIZES in mm:

SGM

RESERVES THE RIGHTS TO IMPROVE OR MODIFY ITS PRODUCT AT ANY TIME

WITHOUT PRIOR NOTICE

ALWAYS REFER TO THE MANUAL SUPPLIED WITH THE

UNIT TO AVOID ANY RISK OF MISTAKE OR OPERATION WHICH DOES NOT

CORRESPOND TO THE MANUAL INDICATIONS

SGM GB

User’s manual 1.02 Giotto 1500

- 20 -

2. I

NSTALLATION

2.1 Equipment

During unpacking, make certain that all the necessary parts have been received and that the

fixture has not been damaged during transport. Should there be any problems, contact the local

authorized SGM distributor immediately.

Only the customer, in fact, can claim eventual damages in the fixture caused by the transportation.

 GIOTTO 1500

 WARRANTY BOOKLET

 USER MANUAL

 1 XLR 5 P MALE CONNECTOR

 1 XLR 5 P FEMALE CONNECTOR

 1 POWER-CON CONNECTOR

 2 FAST-LOCK CLAMPS

 2 ADDITIONAL LENS (only for WASH configuration)

 1 SAFETY CABLE

 1 ANTENNA WIRELESS

 1 PHILIPS LAMP MSR GOLD 1200 FAST FIT

DO NOT DESPERD THE PACKING ELEMENTS.

THE PACKING ELEMENTS (PLASTIC BAGS, FOAM, NAILS, ETC.), MUST NEVER BE LEFT NEAR

CHILDREN, AS DANGEROUS. USE THE ORIGINAL PACKAGE IN CASE OF FIXTURE RETURN TO THE

MANUFACTURER FOR REPAIR OR MAINTENANCE SERVICE, IT HAS BEEN SPECIFICALLY MADE TO

PROTECT THE FIXTURE DURING THE TRANSPORT.

2.2 Power cable construction

ATTENCTION!!

Before installing the fixture check that the power supply cable AC is

disconnected.

 Wiring and connection work must be carried out by experienced qualified staff.

 Class one equipment must be earthed (grounded)

 Do not power Giotto 1500 units with dimmers, as this could damage their on-board power

supply

 Before connecting the unit, make certain that the mains power supply is the same as indicated

on the fixture’s ID plate

 The unit must be protected by a thermal/magnetic circuit-breaker

 The power supply cable has the following colours:

SYMBOL COLOUR

L Black

N White

Green

 The installer has to use a socket suitable to Giotto 1500’s electrical input.

Page is loading ...

SGM Giotto 1500 User manual

Brand: SGM

Model: Giotto 1500

Category: Stroboscopes & disco lights

Type: User manual

Download PDF

report

SGM Giotto 1500 User manual

SGM Giotto 1500 User manual

Related papers

Other documents