Pelco Sarix Professional IWP 2 Wedge Quick start guide

Brand: Pelco

Model: Sarix Professional IWP 2 Wedge

Category: Security camera accessories

Type: Quick start guide

Pelco Sarix Professional IWP 2 Wedge is an advanced IP camera suitable for indoor and outdoor surveillance. Its rugged design and environmental protection features make it ideal for harsh conditions. With 2MP resolution and a wide field of view, it delivers excellent image quality. It supports PoE for easy installation and has audio input/output ports for two-way communication. Additionally, it features a microSD card slot for local storage and an alarm input/output for integration with security systems.

C2297M-A-EN (10/20)

Sarix

Professional IWP

Series Rugged

Environmental Wedge Dome

Quick Start Guide

IWP121-1ES

IWP221-1ES

2 
Contents 
Contents ....................................................................................................................................................................................... 2 
Important Notices Statement ........................................................................................................................................................ 3 
Warranty Statement ..................................................................................................................................................................... 3 
Models Instructions ...................................................................................................................................................................... 4 
Description ................................................................................................................................................................................... 5 
Package Contents ........................................................................................................................................................................ 5 
Installation .................................................................................................................................................................................... 5 
Wall/Ceiling Surface Mount ............................................................................................................................................ 6 
Surface Mount with IMPEBAP ....................................................................................................................................... 7 
Wall Mount with IMPPMB-1I .......................................................................................................................................... 8 
Positioning & Adjusting the Field of View ....................................................................................................................... 9 
Pelco Troubleshooting Contact Information ............................................................................................................................... 10 
Note for Dimension Drawings ..................................................................................................................................................... 10 

Important Notices Statement

For information about Pelco’s product-specific important notices and thereto related information, refer to www.pelco.com/legal.

REGULATORY NOTICES

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority

to operate this equipment under Federal Communications Commission’s rules.

CAN ICES-3(A)/NMB-3(A)

Korean Class A EMC

Warranty Statement

For information about Pelco’s product warranty and thereto related information, refer to www.pelco.com/warranty.

UL SAFETY NOTICES

The product shall be installed by a qualified service person and the installation shall conform to all local codes.

Models Instructions

The physical appearances and installation methods for the models indicated within the list below are, by and large, the same.

Therefore, please regard use quick guide where we use the example from IWP221-1ES as a reference to apply to all the

models.

Model

Description

IWP121-1ES

1MP Rugged Environmental Wedge Dome Camera

IWP221-1ES

2MP Rugged Environmental Wedge Dome Camera

Description

The Sarix® Professional Series IP Rugged Environmental Wedge Dome is ideal for both indoor and outdoor applications.

Before installing it, please verify your model and read this guide carefully

Package Contents

 Fixed Flat Dome Camera * 1

 Plastic Anchor * 2

 Flat Head Screw (Tapping Type) * 2

 Security Torx Wrench * 1

 Mounting Template * 1

 Printed Quick Installation Guide * 1

 Resources sheet * 1

 Desiccant * 1

 Important Safety Instruction * 1

Installation

You can install the Sarix® Professional Series Rugged Environmental Wedge Dome using the following

method.

 Wall/Ceiling Surface Mount

 Surface Mount with IMPEBAP

 Wall Mount with IMPPMB-1I

WALL/CEILING SURFACE MOUNT

Install the wedge dome camera to a surface (wall/ceiling) as shown in the following procedure.

1. Loosen the 2 screws via torx wrench followed by removing the top cover. Connect PoE port with RJ-45 connector via

Ethernet cable that links with PoE compatible network device and wire the audio in/out devices with the audio in/out ports

individually if required. Also, Insert micro SD card into the slot if needed.

2. After attaching the mounting template to the surface, drill two holes indicated on the mounting surface and insert the

plastic anchors into the holes. Also, drill another hole with Ø30mm in diameter as indicated for cables threading.

Eventually, secure the camera body onto the surface by fastening the 2 tapping screws.

3. Flip over the dome cover and stick the included desiccant to the rectangular recess as the figure shown.

4. Attach the dome cover to the camera body and securely tighten them by torx wrench to complete installation.

SURFACE MOUNT WITH IMPEBAP

You can mount the camera to a surface with IMPEBAP, a Sarix 4S electrical box adaptor mount for

Wedge Dome. Refer to the figures below for surface installation with IMPEBAP.

1. Fix the adaptor plate to the surface embedded with 4S electrical box with 2 screws. Note the hole pattern with “4”

indicators that represent the exact holes for 4S installation on the adaptor for proper mounting.

2. Pass all the cable thread from camera body into the adaptor plate and surface followed by wiring them if necessary.

Fasten the camera body onto the adaptor plate with 2 screws. Note the hole pattern with “W” indicators that represent

the exact holes for Wedge Dome installation on the adaptor for proper mounting.

3. Attach the dome cover to the camera body that was fixed with the adaptor plate already, and tightly secure the 2 screws

of dome cover by torx wrench.

4. The Wedge Dome is eventually properly mounted on the surface with IMPEBAP.

WALL MOUNT WITH IMPPMB-1I

Wall mount with IMPPMB-1I requires both the L-shape bracket and the adaptor plate from IMPEBAP. Refer to the figures

below for detailed process for Wall Mount with IMPPMB-1I.

1. Fasten the L-shape bracket onto the desired wall with 4 screws.

2. Further fix the adaptor plate from IMPEBAP onto the L-shape bracket with 2 screws. Note the hole pattern with

“L” indicators that represent the exact holes for L-shape bracket assembly on the adaptor for proper installation.

3. Pass all the cable thread from camera body into the adaptor plate and L-shape bracket followed by wiring them if

necessary. Fasten the camera body onto the adaptor plate with 2 screws. Note the hole pattern with “W”

indicators that represent the exact holes for Wedge Dome installation on the adaptor for proper mounting.

4. Attach the dome cover to the camera body that was fixed with the adaptor plate already, and tightly secure the 2

screws of dome cover by torx wrench.

5. The Wedge Dome is eventually properly mounted on the wall with IMPPMB-1I.

POSITIONING & ADJUSTING THE FIELD OF VIEW

1. Loosen the two screws beside the lens as shown in the figure below.

2. Adjust the lens to a desired shooting angle for suitable field of view.

NOTE: Make sure to relock the 2 screws tightly after adjustment.

The lens can be adjusted vertically & horizontally

once the two indicated screws are fully loosened.

Pelco Troubleshooting Contact Information

If the instructions provided fail to solve your problem, contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or

+1-559-292-1981 (international) for assistance. Be sure to have the serial number available when calling.

Do not try to repair the unit yourself. Leave maintenance and repairs to qualified technical personnel only.

Note for Dimension Drawings

NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

RUGGED ENVIRONMENTAL WEDGE DOME

Pelco Sarix Professional IWP 2 Wedge Quick start guide

Brand: Pelco

Model: Sarix Professional IWP 2 Wedge

Category: Security camera accessories

Type: Quick start guide

Download PDF

report

Pelco Sarix Professional IWP 2 Wedge Quick start guide

Pelco Sarix Professional IWP 2 Wedge Quick start guide

Related papers

Other documents