Everex StepNote KR3200W Quick Setup Manual



1. Installing the Battery Pack

Insert battery in the battery compartment located

on the bottom of the computer.

2. Plugging the Power Cable (Figure 1)

1) Plug the AC adapter connector to the DC-IN

socket on the rear side of the computer.

2) Plug the power cable to the AC adapter.

3) Plug the other end of the power cable to a

live wall outlet.

3. Opening the Display Panel (Figure 2)

1) Face the front side of the computer, position

the latch to the center of the display panel.

2) Slide the display latch to the right and raise the

display panel.

3) Adjust the display to a comfortable viewing

angle.

4. Turning on the Computer

To turn on the computer, press the power

button and hold down for 2 seconds. The power

LED on the panel will light up to indicate that the

computer is on.

Exploring your Computer

Figure 1

Figure 2

Front SideRear Side

Right Side Left Side