DK Digital TS-1000 Owner's manual

Brand: DK Digital

Model: TS-1000

Type: Owner's manual

Many thanks . . .

…that you have decided in favour of one of our products.

For your own safety and for helping you to understand

the complete functional range, please read these

instructions carefully and keep them for a later

consultation. Should you sell the appliance please give

the buyer the manual to take it with him.

www.dk-digital.com

-2-

General things

•

Your TS-1000 disposes of four different display

functions:

- Time with alarm function

- Temperature

- Date with weekday

- Timer.

•

By a careful tapping of the display, you transfer the

display of the respective function. After each switch

over, the housing is shortly illuminated by colour.

•

With the switch “Return to time” you can determine

whether after having shown the temperature, timer or

date display in each case for ten seconds, the appliance

is to display the time again (On) or to permanently

maintain the respective function display (Off).

•

We have inserted transparent protection foils between

the battery poles so that the batteries are still fresh at

their first use (see next page). In order to start-up

the appliance, please open first of all the battery

compartment and remove the protection foils.In

doing so, the display should be activated immediately.

-3-

Setting the time

•

Tap the display so many times until the time is shown.

•

Hold the SET key at the bottom side of the appliance

for two seconds. Now, the hour value is flashing and

you can enter the current time by using the 5 or 6

key.

-4-

•

Then, you push the SET key once again. Now, the

minute value is flashing and you can enter the minute

of the current time by using the 5 or 6 key.

•

Push the SET key once again in order to save settings.

If no key is pushed for one minute, the appliance saves

the current setting.

•

After completion of the time setting, you can change

the time display to 12 hours or 24 hours mode by

pushing the 5 or 6 key once.

Setting the alarm time

•

If necessary, tap the display so many times until the

time is shown.

•

Push the ALARM key at the bottom side of the

appliance. The AL sign appears in the display. You have

now ten seconds for setting the alarm time. If this time

expires, the appliance returns to the time display.

•

Now, push the SET key and the hour value is flashing.

By means of the 5 or 6 key, you can set the hour of

the desired alarm time.

•

Push the SET key once again and the minute value is

flashing. You can now set the minute of the desired

alarm time by using the 5 or 6 key.

-5-

•

Finally, push the SET key. The alarm time is now saved

and the alarm clock symbol appears in the display.

After ten seconds, the appliance returns to the time

display. You can have the alarm time displayed at any

time by pushing the ALARM key.

•

At the set time, the alarm tone is activated and will be

peeping for a maximum of two minutes or until you tap

the display. The alarm time is, however, saved. In order

to switch the alarm function off, push the ALARM key and

then hold this key for two seconds. The alarm clock

symbol disappears.

Temperature display

•

If you tap the display during the time display once, the

display changes to the current room temperature.

•

Push the 5 or 6 key during the temperature display for

changing from Celsius to Fahrenheit as measuring unit.

Date display

•

If you tap the display during the temperature display

once, the display changes to the date.

•

For setting the correct date, hold the SET key for two

seconds. Now, the year is flashing for one minute and

you can change it by means of the 5 or 6 key. Then,

you push the SET key and the number for the month is

-6-

flashing which you can again set with the 5 or 6 key.

Push the SET key once again for setting the day in the

same way. Push the SET key for the last time for

completing your setting.

Timer function

•

If you tap the display during the date display once, the

appliance changes to the timer operation. With it, you

can program a split-second “countdown” of up to 180

minutes at the end of which an alarm signal resounds.

•

For setting the desired timer time, push the SET key

during the timer display. Now, the minutes of the timer

time are flashing and you can set them by means of the

5 or 6 key. Then, you push the SET key once again

and the seconds of the timer time are flashing which

you can again set by means of the 5 or 6 key. Finally

push the SET key.

•

In order to start the “countdown”, push the 6 key. If

you want to stop it, push the 6 key again, also for

continuing.

•

After the timer time has expired, the alarm signal

resounds which can be stopped by tapping the display.

The timer time is, however, saved.

-7-

Changing the batteries

This model utilizes seperated batteries to supply the

clock function (1 x 1,5V, size “AAA”) and the illumination

of the housing (3 x LR44).

If the display looks blurred or the display remains totally

dark, you must replace the AAA sized battery. For doing

so, open the battery compartment on the bottom side of

the appliance. Remove the discharged battery and insert

a new one according to the layout that is shown in the

battery compartment.

If the coloured illumination gets darker or remains totally

dark, you must replace the three LR 44 batteries. You’ll

find them inside the battery compartment as well.

When replacing batteries look out exactly for the

compliance of the correct polarity, otherwise, the

appliance will not function and can be damaged. For a

longer useful economic life, you should use alkaline

batteries. Close the battery compartment again.

Batteries do not belong into the domestic waste.

Please turn your discharged batteries in at the

responsible collecting point or at the place where

you have bought the new ones. Never throw

batteries into fire.

-8-

If you do not use the appliance for a longer period of

time, remove the batteries from the battery

compartment in order to avoid damage due to leakage of

the batteries.

Resetting

If you want to reset all settings into the state of delivery,

push the switch behind the RESET opening on the bottom

side of the appliance with a pointed object (e.g. a

needle). You must then newly set the time and the date.

Disposal advice

When the operating life of this device has

ended it must not be disposed as

domestic waste, but in accordance with

national environmental guidelines.

-9-

-10-

-11-

We reserve the right to correct errors and make

technical alterations.

manual as a whole nor excerpts may be reproduced without our

prior written permission.

DK digital AG

40878 Ratingen

Germany

www.dk-digital.com

DK Digital TS-1000 Owner's manual

DK Digital TS-1000 Owner's manual

DK Digital TS-1000 Owner's manual

Related papers

Other documents