- This appliance is intended for adult use.
Ensure that this product is not used by the
disabled, children or people unused to its
handling.
- This appliance should be stored out of
reach of children and/or the disabled.
- Make sure that dust, dirt or other foreign
objects do not block the fan grill on the
appliance.
- Turn the thermostat control to the
minimum (MIN) setting. This does not mean
that the iron is switched off permanently.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer’s liability null and void.
Instructions for use
- Unroll the cable completely before plug-
ging it in.
- Connect the appliance to the mains.
- Position the appliance to direct the airflow
in the desired direction. (Fig. 3)
- Turn the appliance on, by using the selec-
tion knob.
Fan function:
- Select the fan position.
- Check that the thermostat button is set to
the maximum.
Heater function:
- Select the heater position.
- Select the desired heating power.
- Check that the thermostat control is set to
the temperature required
Carry handle/s:
- This appliance has a handle on the back
to make it easy and convenient to transport.
(Fig. 1)
Once you have finished using the ap-
pliance:
- Select the minimum position (MIN) using
the speed control.
- Stop the appliance, selecting position 0 on
the selector control.
- Unplug the appliance from the mains.
Safety thermal protector:
- The appliance has a safety device, which
protects the appliance from overheating.
- If the appliance turns itself off and does
not switch itself on again, disconnect it
from the mains supply, and wait for ap-
proximately 5 minutes before reconnecting.
If the machine does not start again seek
authorised technical assistance.
Wall-mounted option (Fig. 2)
- Remove the adjustable foot from the
appliance. To do so, press the two catches
which support the swivel pins of the plate
with regard to the appliance body.
- Use the adjustable foot as a template for
marking the two mounting holes on the wall.
- Insert the plugs (not included) in the wall.
- Place the adjustable foot in the wall
and screw it into the plugs (screws not
included).
- Fit the appliance body into the two
catches which support the swivel pins of the
adjustable foot.
- In the event that the appliance is mounted
on a bathroom wall, position it in such a
way that the socket, power supply cable,
switches or other controls are not within the
Manual CA 2002 Jan 2010.indd 12Manual CA 2002 Jan 2010.indd 12 22.02.10 15:16:5522.02.10 15:16:55