Winners Only BTP1001F Assembly Instructions

Winners Only
Brand
Winners Only
Model
BTP1001F
Type
Assembly Instructions

Winners Only BTP1001F is a bed frame that comes with a charging kit. The bed frame is easy to assemble and can be done with the assistance of another person. It is important to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. Please do not over tighten screws or bolts. The charging kit can be attached to the desired headboard leg using 2 screws and a phillips screwdriver. Before the removal or installation of the charging kit, disconnect the charging kit from any electrical outlets.

Winners Only BTP1001F is a bed frame that comes with a charging kit. The bed frame is easy to assemble and can be done with the assistance of another person. It is important to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. Please do not over tighten screws or bolts. The charging kit can be attached to the desired headboard leg using 2 screws and a phillips screwdriver. Before the removal or installation of the charging kit, disconnect the charging kit from any electrical outlets.

Page 1 of 3
WINNERS ONLY
R
ASSEMBLY INSTRUCTIONS
Allen Bolts
Flat Washer
HB Left Leg
Slat
Support Leg
Slat
Support Leg
STEP 1: Attach the Wood Stretcher (D) to both Headboard Legs (A&B)
using provided hardware as shown on FIG.1
Caution:Pleasereadinstructionsthoroughlybeforeunpackingassemblyparts.Sharp,exposedstapletipscancauseinjury.Therefore,foryour
protection,pleaseremoveanyexposedstaplesusedinpacking.
Pleasekeepallhardwarepartsoutofthereachofchildren.
1.Werecommendthatyoushouldassemblethisproductwiththeassistanceofanotherperson;thiswillmakeassemblyeasierandwillhelpto
eliminatedamagetotheproductorinjurytopersonsduringassembly.
2.Besuretocheckallpackingmaterialscarefullyforsmallpartsthatmayhavecomelooseinsidethecartonduringshipment.
3.Pleasedonotovertightenscrewsorbolts.
4.Pleaseputallpartsonanon-abrasivefloorbeforeassembly,andfollowtheassemblystepstoassembleyournewlypurchasedproduct
correctlyandefficiently.
PROD.NO : BTG/BTH/BTP1001Q
PROD.NO : BTB/BTG/BTH/BTP1001F
WINNERS ONLYR
ASSEMBLY INSTRUCTIONS
Page 2 of 3
STEP 3: Attach both Bed Rails (F) to the Headboard
assembly (A,B,D&C) using the provided hardware as
shown on FIG.3
STEP 3: Attach both Bed Rails (F) to the Footboard (E)
using the provided hardware as shown on FIG.4
STEP 2: Attach the Headboard (C) to the Legs
assembly (A,B&D) using provided hardware as
shown on FIG.2
PROD.NO : BTG/BTH/BTP1001Q
PROD.NO : BTB/BTG/BTH/BTP1001F
Page 3 of 3
WINNERS ONLY
R
ASSEMBLY INSTRUCTIONS
STEP 5: Attach Support Legs (H) to Slats (G)as shown on FIG.5.
STEP 6: Attach Slats with Support legs (G&H) to the Side Rail
(F) using the provided hardware as shown on FIG.6
Assembly is now completed.
PROD.NO : BTB/BTG/BTH/BTP1001F
PROD.NO : BTG/BTH/BTP1001Q
WINNERS ONLY
ASSEMBLY INSTRUCTIONS
Page 1 of 1
WARNING: Before the removal or installation of charging kit disconnect charging kit from any electrical outlets.
Fig.1
STEP 2: Attach charging kit on the desired headboard leg
using 2 screws and phillips screwdriver as shown in Fig. 3.
Step 1: Using a phillips screwdriver remove the 2 screws
attaching the charging kit to headboard leg as shown in Fig.1.
BTB/BTG/BTH/BTP1001F
BTB/BTG/BTH/BTP1001T
Charging Kit Removal And Installation.
Note:
The Manufacturing label should not be visible
once charging kit is installed as shown in Fig. 2.
Fig. 3
Fig.2.
R
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Winners Only BTP1001F Assembly Instructions

Winners Only
Brand
Winners Only
Model
BTP1001F
Type
Assembly Instructions

Winners Only BTP1001F is a bed frame that comes with a charging kit. The bed frame is easy to assemble and can be done with the assistance of another person. It is important to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. Please do not over tighten screws or bolts. The charging kit can be attached to the desired headboard leg using 2 screws and a phillips screwdriver. Before the removal or installation of the charging kit, disconnect the charging kit from any electrical outlets.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents