TP-LINK RE350 Quick Installation Manual
- Category
- Routers
- Type
- Quick Installation Manual
TP-LINK RE350 extends the range of your existing Wi-Fi network, eliminating dead zones and improving the signal strength of your home network. With dual-band technology, it can connect to both 2.4GHz (up to 300Mbps) and 5GHz (up to 867Mbps) networks, providing a fast and stable connection for your devices. It also supports WPS (Wi-Fi Protected Setup) for easy setup.
TP-LINK RE350 extends the range of your existing Wi-Fi network, eliminating dead zones and improving the signal strength of your home network. With dual-band technology, it can connect to both 2.4GHz (up to 300Mbps) and 5GHz (up to 867Mbps) networks, providing a fast and stable connection for your devices. It also supports WPS (Wi-Fi Protected Setup) for easy setup.
Quick
Installation Guide
RE350
©2016 TP-LINK 7106506258 REV1.0.1
Applicable Model:
LED Explanation
Button Explanation
2.4GHz/5GHz
On: The extender is connected to the
2.4GHz/5GHz wireless network of your host
network.
Off: No connection.
POWER
On: The extender is on.
Blinking: The extender is initializing.
Off: The extender is off.
Solid blue: The extender is connected to the
router, and is in a good location.
Solid red: The extender is connected to the
router, but is too far away from the router.
Blinking: WPS connection is in process.
Off: No active connection.
(WPS)
Power button: To turn on or off the extender, press the Power button.
LED button: To turn all LEDs on or off, press the LED button.
or
Connect to the extenderPower on
Configure
Both extended networks share the same Wi-Fi passwords as those of your host networks,
but may have different SSIDs (network names) if you have customized them during the configuration.
Enjoy!
Relocate
Using a Web Browser
Method ONE
If your router does not support 5GHz wireless
network, please click Skip to continue.
Select your router's 2.4GHz or 5GHz host
network and enter the password, then click
Next.
http://tplinkrepeater.net
admin
admin
Login
Launch a web browser and type
http://tplinkrepeater.net in the address
field. Use admin (all lowercase) for both
Username and Password to log in.
If the log in window does not pop up,
please refer to the FAQ > Q1.
3 4
5
Create a new username and password for
log in the web management page, then
click Confirm.
You can customize the Extended 2.4GHz
and 5GHz SSIDs or keep the host network
SSIDs (default), then click Next.
1
2
Next
Please select 2.4GHz Host network or skip this network.
SSIDID Signal MAC Address Security
Your router network name 30:B5:C1:33:99:76
Host 2.4GHz Password:
TP-LINK_123456 23:B5:C0:30:90:06
Exit Other... Rescan Skip
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
12345678
1
2
Extended 2.4GHz SSID: Your network name Copy Host SSID
Hide SSID broadcast
Note: The extended 2.4GHz password is the same as your Host password.
Extended 5GHz SSID: Your network name_5G Copy Host SSID
Hide SSID broadcast
Note: The extended 5GHz password is the same as your Host password.
Back Next
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
Plug the extender into an electrical
outlet near your router.
Verify your wireless settings and click Finish.
The corresponding LEDs ( / )
should turn solid on.
1. Unplug the Ethernet cable
from your computer (if any).
2. Click the Wireless
Network Connection icon
on your taskbar.
3. Click the refresh icon
and connect to the
extender’s network:
TP-LINK_Extender_2.4GHz
or _5GHz.
Connections are available
Not connected
Wireless Network Connection
Connect automatically Connect
TP-LINK_Extender_2.4GHz
√
Wait until the Power LED
changes to solid blue.
Red
Too far away
Blue
Ideal location
Extended NetworkHost Network
Host Router Extender
Clients
Plug the extender into an electrical outlet between your router
(Host Network) and the Wi-Fi “dead” zone. The location you
choose must be within the range of your existing host network.
Wait until the LED is lit and solid blue. If not, relocate it closer
to the router to achieve a good (or better) signal quality.
1
2
1. Unplug the Ethernet cable from your computer (if any).
2. Click the Wi-Fi icon in the top right corner of the
screen, and connect to the extender’s network:
TP-LINK_Extender_2.4GHz or _5GHz.
For Mac OS X Users
Wi-Fi: On
Turn Wi-Fi Off
TP-LINK_Router
Join Other Network...
Create Network...
Open Network Preferences...
TP-LINK_Extender_2.4GHz
For Windows Users
Using WPS is an easier way to extend your host network. You are recommended to use this method if your host
router has the WPS button. The button might look like one of these: . If not, please refer to Method ONE.
WPS
Q3. What should I do if the LED does not change to solid after completing
Method ONE?
· You may have entered the incorrect Wi-Fi password of your host network during the configuration. Please
log into the extender's web-based interface to check the password and try again.
· Reset the extender and go through the configuration again.
Q4. I have enabled a wireless MAC filter, wireless access control, or access
control list (ACL) on my host router. What should I do before configuring and
using the extender?
·
If you have enabled those functions of your host router, you may need to disable them first. And
then follow Method ONE or Method TWO to complete the configuration.
For details, please refer to the Troubleshooting of the User Guide on the support page at
www.tp-link.com.
The extender can be used as a wireless adapter to connect any Ethernet-only device
(such as a Blu-ray player, game console, DVR, or smart TV) to your Wi-Fi network.
First, connect the extender to your router referring to Method ONE or Method TWO,
then connect the extender to your Ethernet-only device via an Ethernet cable.
Entertainment Adapter
TP-LINK Tether app provides a simple, intuitive way to access, manage your extender
using your iOS or Android devices.
1. Scan the QR code or search the keywords “TP-LINK Tether” to
download the app from the App Store or Play Store.
2. Ensure your smart device is wirelessly connected to the extender.
3. Launch the app and start managing your extended network.
Block network access
from specific devices
Turn off LEDs
at a specific time
Change the basic
extended network settings
Do initial configuration
of your extender
TP-LINK Tether App
Tether
How to
begin?
Using WPS (Wi-Fi Protected Setup)
Method TWO
Smart TV
Game Console
Desktop
Router
Both extended networks share the same SSIDs (network names) and passwords as those of your host networks.
Enjoy!
Plug the extender into an electrical outlet
near your router.
Power On Connect
Relocate
Q1. Why doesn’t the login page appear after entering http://tplinkrepeater.net?
· If your computer is wirelessly connected, please verify that you have connected to
the extender’s
SSID
. If your computer is connected via an Ethernet cable, please verify that the connection is stable.
· Make sure your computer is set to obtain an IP address automatically.
· Use the IP address to log in to the page. The default IP is 192.168.0.254. If the extender is connected
to the host router, please go to the router’s DHCP client list to obtain the extender’s current IP address.
· Please reset the extender and try again.
If the problem still exists, please refer to the FAQs (NO.931&NO.504) at www.tp-link.com for detailed
instructions.
Q2. How do I restore the extender to its factory default settings?
· While the extender is powered on, press and hold the Reset button until all the LEDs turn on
momentarily.
Frequently Asked Questions (FAQ)
Press the WPS button on your router, and then press the button on the extender.
1
WPS Press
2If you are connecting the extender to a dual-band router but only or
LED is on, repeat step 1 again to connect the other band.
1. Some ISP gateways disable the WPS function by default. If the WPS connection fails, please use Method ONE.
2. For more information about using WPS on your router, please refer to the router manufacturer's user guide.
Wait until the Power LED
changes to solid blue.
Red
Too far away
Blue
Ideal location
Extended NetworkHost Network
Host Router Extender
Clients
The LED should change
from blinking to a solid state,
indicating a successful WPS
connection.
If not, please use Method ONE.
Plug the extender into an electrical outlet between your router
(Host Network) and the Wi-Fi “dead” zone. The location you
choose must be within the range of your existing host network.
Wait until the LED is lit and solid blue. If not, relocate it closer
to the router to achieve a good (or better) signal quality.
1
2
Note: The AP mode of the extender is not supported by Tether.
-
1
-
2
TP-LINK RE350 Quick Installation Manual
- Category
- Routers
- Type
- Quick Installation Manual
TP-LINK RE350 extends the range of your existing Wi-Fi network, eliminating dead zones and improving the signal strength of your home network. With dual-band technology, it can connect to both 2.4GHz (up to 300Mbps) and 5GHz (up to 867Mbps) networks, providing a fast and stable connection for your devices. It also supports WPS (Wi-Fi Protected Setup) for easy setup.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
TP-LINK RE450 Quick Installation Manual
-
-
TP-LINK RE205 User manual
-
-
-
TP-LINK RE650 Installation guide
-
TP-LINK RE500 User guide
-
TP-LINK RE360 User manual
-
TP-LINK RE350 User guide
-
