Utility Solutions BREAK-SAFE USBS-27-1-PS is a portable loadbreak & load pickup jumper clamp designed to perform the following three functions: loadbreak, load pickup, and continuous current duty. It is intended for temporary connecting and transferring of load and should not be used in a permanent capacity under any circumstance. The BREAK-SAFE is designed to be installed using appropriate rubber gloves and personal protective equipment. The tool is operated using an insulated hotstick.
The BREAK-SAFE USBS-27-1-PS has a maximum current rating of 300A and a maximum voltage rating of 27kV. It can be used with conductors ranging in size from #6 Copper to 954 ACSR. The tool has a safety pin that prevents accidental operation, and it can be used in both the open and closed positions.
Utility Solutions BREAK-SAFE USBS-27-1-PS is a portable loadbreak & load pickup jumper clamp designed to perform the following three functions: loadbreak, load pickup, and continuous current duty. It is intended for temporary connecting and transferring of load and should not be used in a permanent capacity under any circumstance. The BREAK-SAFE is designed to be installed using appropriate rubber gloves and personal protective equipment. The tool is operated using an insulated hotstick.
The BREAK-SAFE USBS-27-1-PS has a maximum current rating of 300A and a maximum voltage rating of 27kV. It can be used with conductors ranging in size from #6 Copper to 954 ACSR. The tool has a safety pin that prevents accidental operation, and it can be used in both the open and closed positions.
Utility Solutions BREAK-SAFE USBS-27-1-PS is a portable loadbreak & load pickup jumper clamp designed to perform the following three functions: loadbreak, load pickup, and continuous current duty. It is intended for temporary connecting and transferring of load and should not be used in a permanent capacity under any circumstance. The BREAK-SAFE is designed to be installed using appropriate rubber gloves and personal protective equipment. The tool is operated using an insulated hotstick.
The BREAK-SAFE USBS-27-1-PS has a maximum current rating of 300A and a maximum voltage rating of 27kV. It can be used with conductors ranging in size from #6 Copper to 954 ACSR. The tool has a safety pin that prevents accidental operation, and it can be used in both the open and closed positions.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI