TOPSCCC EX94241 Installation guide

Brand
TOPSCCC
Model
EX94241
Category
Interface cards/adapters
Type
Installation guide

TOPSCCC EX94241 is a high-performance PCI multi-port serial I/O adapter that offers reliable and efficient serial communication capabilities. With its PCI bus-based architecture and plug-and-play compatibility, it seamlessly integrates into various computer systems. The device features multiple serial ports, enabling simultaneous connections to various RS-232C devices. Its advanced UART technology provides fast data transfer rates and ensures compatibility with a wide range of serial peripherals.

TOPSCCC EX94241 is a high-performance PCI multi-port serial I/O adapter that offers reliable and efficient serial communication capabilities. With its PCI bus-based architecture and plug-and-play compatibility, it seamlessly integrates into various computer systems. The device features multiple serial ports, enabling simultaneous connections to various RS-232C devices. Its advanced UART technology provides fast data transfer rates and ensures compatibility with a wide range of serial peripherals.

PCI Multi-port Serial Card
4
7. Put the chassis cover back on the computer.
8. Turn ON the power of your computer and peripherals.
9. Proceed with Software Driver Installation.
The Multi-port serial card is plug-and-play so the driver
installation is quite straightforward. Please “Browse” to the
correct path on the Driver CD when Windows asking for the
driver’s location.
Note:
To install the Windows NT driver, please run (double click) the
following installing program:
Run Install_Serial.exe in \IO\OXFORD\winNT4 folder for
Serial Ports
Run Install_Parallel.exe in \IO\OXFORD\winNT4 for
Parallel Port
Install 4S (or 8S) octopus
cable
4. Software Driver Installation
1
Congratulation on your purchasing this high performance PCI
multi-port serial I/O adapter. The adapter is high speed PCI bus
based and plug-and-play compliant. Its serial ports are fully
16C950 (and 16C550 backward) UART compatible with most of
the RS-232C devices available from the market.
Features:
Fully PCI Bus Specifications 2.2 compliant
Models: 4S (with DB37 connector), 4S (with 4-port RJ-45
connector) and 8S (with DB62 connector)
128-byte FIFO 16C950 UARTs, Backward Compatible with
16C550
Automated in-band flow control using programmable
Xon/Xoff in both directions
Supports Win98/Me, NT, Windows 2000 and XP
Figure 2-1 4S with DB37 Connector
PCI Multi-port Serial Card
Installation Guide
1. Introduction
2. La
y
out
J2: S1
J3: S2
J4: S3
J5: S4
J6: S1~S4
External
Connector
PCI Multi-port Serial Card
2
Figure 2-2 4S with 4-port RJ-45 Connector
RJ45 PIN# SIGNAL
1 DCD
2 TXD
3 RXD
4 DSR
5 GND
6 DTR
7 CTS
8 RTS
Figure 2-3. 4S with DB37 + Optional Parallel Port
Connectors
J2: S1
J3: S2
J4: S3
J5: S4
J6: S1~S4
External
Connector
J2: Parallel Port Connector
J1: S1~S4
External
Connector
1 8
PCI Multi-port Serial Card
3
Figure 2-4. 8S with DB62 Connector
1. Turn the system power OFF before installation!
2. Use static electricity discharge precautions.
3. Remove the chassis cover from your computer
4. Locate an unused PCI slot (typically white or ivory) and
remove the corresponding slot cover from computer
chassis.
5. Plug the PCI multi-port serial card to the unused PCI
expansion slot and attached the I/O card bracket to the
computer chassis screw.
6. Installing the serial and parallel port cables
For 4S with DB37 connector model, please connect the
DB37-to-DB9x4 cable to its J1 external connector.
For 8S with DB62 connector model, please connect the
DB37-to-DB9x4 cable to its J1 external connector.
3. Installin
g
the Multi-
p
ort Serial Card
J1: S1~S8
External
Connector
  • Page 1 1
  • Page 2 2

TOPSCCC EX94241 Installation guide

Brand
TOPSCCC
Model
EX94241
Category
Interface cards/adapters
Type
Installation guide

TOPSCCC EX94241 is a high-performance PCI multi-port serial I/O adapter that offers reliable and efficient serial communication capabilities. With its PCI bus-based architecture and plug-and-play compatibility, it seamlessly integrates into various computer systems. The device features multiple serial ports, enabling simultaneous connections to various RS-232C devices. Its advanced UART technology provides fast data transfer rates and ensures compatibility with a wide range of serial peripherals.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents