Omnitron Systems Technology FlexPoint 5-Unit Rack-Mounting Shelf Owner's manual

Brand: Omnitron Systems Technology

Model: FlexPoint 5-Unit Rack-Mounting Shelf

Category: Network media converters

Type: Owner's manual

Omnitron Systems Technology FlexPoint 5-Unit Rack-Mounting Shelf is designed to hold up to 5 FlexPoint media converters. It includes a shelf unit, 5 “L” shaped tab brackets, 5 flat head screws, and 5 pan head screws. The shelf can be mounted in a rack or on a wall. It is compatible with FlexPoint units that have the optional DC Adapter (4384). The shelf is easy to install and comes with a two-year warranty.

User Warranty Registration

Please complete both sides and mail or fax this form to the address indicated on

the other side.

Product Type: S Rack-Mount Kit S Chassis S Other _________

Model: _________________________________________________

Serial Number: ______________ Purchase Date: ______________

Purchased From: _________________________________________

Address: ______________________________________________

City: ___________________ State: _______ Zip Code: ________

Country: _______________________________________________

Comments and Suggestions: _______________________________

______________________________________________________

Please complete both sides of this form

Warning

The operating description in this Instruction Manual is

for use by qualified personnel only. To avoid electrical

shock, do not perform any servicing of this unit other

than that contained in the operating instructions, unless

you are qualified and certified to do so by Omnitron

Systems Technology, Inc.

Caution

All user-required operations can be performed without

opening the unit. Never attempt to open or remove the

cover or tamper with the unit.

Warranty

This product is warranted to the original purchaser

against defects in material and workmanship for a

period of TWO YEARS from the date of shipment. A

LIFETIME warranty may be obtained by the original

purchaser by REGISTERING this product with

Omnitron within 90 days from the date of shipment.

TO REGISTER, COMPLETE AND MAIL OR FAX THE

REGISTRATION PORTION OF THIS INSTRUCTION

MANUAL TO THE INDICATED ADDRESS. During the

warranty period, Omnitron will, at its option, repair or

replace a product which is proven to be defective.

For warranty service, the product must be sent to an

Omnitron designated facility, at Buyer’s expense.

Omnitron will pay the shipping charge to return the

product to Buyer’s designated US address using

Omnitron’s standard shipping method.

Limitation of Warranty

The foregoing warranty shall not apply to defects

resulting from improper or inadequate use and/or

maintenance of the equipment by Buyer, Buyer-

supplied equipment, Buyer-supplied interfacing,

unauthorized modifications or tampering with equipment

(including removal of equipment cover by personnel

not specifically authorized and certified by Omnitron),

or misuse, or operating outside the environmental

specification of the product (including but not limited

to voltage, ambient temperature, radiation, unusual dust,

etc.), or improper site preparation or maintenance.

No other warranty is expressed or implied. Omnitron

specifically disclaims the implied warranties of

merchantability and fitness for any particular purpose.

Exclusive Remedies

The remedies provided herein are the Buyer’s sole and

exclusive remedies. Omnitron shall not be liable for any

direct, indirect, special, incidental, or consequential

damages, whether based on contract, tort, or any legal

theory.

Form:040-04392-001B 11/07

Notes:

____________________________

_____________________________

____________________________

FlexPoint

™

5-Module Rack-Mounting

Shelf User Instructions

Description:

The FlexPoint 5-Module rack-mounting shelf was

designed to hold up to 5 FlexPoint media converters.

Inventory:

The FlexPoint rack-mounting kit includes the following

hardware:

(1) Shelf unit.

(5) “L” shaped tab brackets.

(5) Flat head screws, 4-40, 1/4 inch.

(5) Pan head screws, 4-40, 1/4 inch.

Warning:

Before installing a FlexPoint converter unit, make sure

to remove it from its power adapter. Make sure to

disconnect the power adapter from the AC line power.

Mounting:

Installing the FlexPoint Rack-Mounting kit is done in

two steps:

Installing the Tab Brackets:

1. Remove screw from forward-side of the FlexPoint

converter unit to be installed.

2. Align the screw threads of the FlexPoint enclosure

with the holes in the bracket.

3. Attach bracket using the removed screw and a

second 4-40 flat head screw enclosed with the kit.

4. The FlexPoint with the tab bracket should look as in

the picture below.

Installing the FlexPoint Converter Unit:

1. Slide unit into the shelf. Rear of the unit should

protrude the opening at the rear of the shelf.

2. Attach tab bracket to the shelf using a 4-40

pan-head screw from the parts kit.

3. Follow any installation instructions in the FlexPoint

converter User Installation guide.

NOTE: FlexPoint units installed with the optional

DC Adapter (4384) can not be mounted to the

shelf.

Technical Support:

If you encounter problems in installing or maintaining

this product, contact Omnitron Technical Support:

Phone: (949) 250-6510

Fax: (949) 250-6514

Address: Omnitron Systems Technology, Inc.

140 Technology Drive, #500

Irvine, CA 92618 USA

Email: supp[email protected]

User Warranty Registration

Please complete both sides and mail or fax this registration form to:

Omnitron Systems Technology, Inc.

140 Technology Drive, #500

Irvine, CA 92618 USA

Fax: (949) 250-6514

Name:___________________________________________________

Company:_______________________________________________

Address:_______________________________________________

_______________________________________________

City: ___________________ State: _______ Zip Code: __________

Country:________________________________________________

Phone: ____________________ Fax: _________________________

E-mail:__________________________________________________

Please complete both sides of this form

Omnitron Systems Technology FlexPoint 5-Unit Rack-Mounting Shelf Owner's manual

Brand: Omnitron Systems Technology

Model: FlexPoint 5-Unit Rack-Mounting Shelf

Category: Network media converters

Type: Owner's manual

Download PDF

report

Omnitron Systems Technology FlexPoint 5-Unit Rack-Mounting Shelf Owner's manual

Omnitron Systems Technology FlexPoint 5-Unit Rack-Mounting Shelf Owner's manual

Related papers

Other documents