Miele 51632105USA Fitting Instructions

Miele
Brand
Miele
Model
51632105USA
Type
Fitting Instructions

Miele 51632105USA - The following is a brief overview of the capabilities of your new intelligent washing machine to provide you with ideas on how to get the most out of your purchase:

  • Automatic Load Sizing: This feature detects the weight and size of the laundry load to ensure the precise amount of water and energy is used for the cycle selected, saving money on your utility bills.

  • WI-FI CONNECT: With this feature, you can remotely control your washer from anywhere, at any time, using the Miele app on your mobile phone. You can start, stop, or check the remaining cycle time.

Miele 51632105USA - The following is a brief overview of the capabilities of your new intelligent washing machine to provide you with ideas on how to get the most out of your purchase:

  • Automatic Load Sizing: This feature detects the weight and size of the laundry load to ensure the precise amount of water and energy is used for the cycle selected, saving money on your utility bills.

  • WI-FI CONNECT: With this feature, you can remotely control your washer from anywhere, at any time, using the Miele app on your mobile phone. You can start, stop, or check the remaining cycle time.

Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
,
Service and repair work should only be carried out by suitably qualified persons in
accordance with all appropriate local and national safety regulations.
Module 1 liquid dispenser1-6fitting - PW 6241 / 6321
Procedure:
^
Disconnect the machine from the mains.
^
Remove the machine lid.
^
Remove the electrical connection cover plate from the rear of the machine.
^
Fit the electronic module EZL 230 a, adapter EV 230 b, Fig. 2, level switch c, inlet valve d
and cable through-feeds e, Fig. 1 and 3.
^
Connect the thin hose f to the level switch.
^
Connect the electronic module EZL 230, adapter EV 230 Fig. 2, level switch and inlet valve
Fig. 1 in accordance with the wiring diagram.
^ Disconnect the connection between the electronic modules EW 230 1X and ELP 230 24X and
replace it with the new connections.
Module registration
^ Access the Service level (service mode).
Select menu item Service settings, Sign on module, EZL code 1, Sign on module?
Press the "Save" button S. The module is now registered.
^
Select menu item Service settings, Basic settings, Dispensing.
Set Dispenser display to On.
^
Press the "Save" button S.
^
Interrupt the mains supply to quit the service mode.
^
Check the water supply for leaks. Carry out a check for correct operation.
^
Refit the electrical connection cover plate. Refit the machine lid.
M.-Nr. 06 702 862 5
Dispenser pump registration
^
Access the Operating level (supervisor mode).
Select menu item Settings, Dosage calibration, Dispenser pump 1.
^
Place the dispenser pump output (pressure) hose in a measuring beaker.
^
Press button 0/1 (the pump runs for 60 s).
^
Read off the dispensed quantity in the measuring beaker. Enter this figure in the
display V:....ml.
^
Press the "Save" button S, select the next pump and repeat.
Empty signal registration
^
Select menu item Dispenser level reminder.
Select dispenser pump 1 and change option from No to Yes. Select the next pump and
repeat.
6 M.-Nr. 06 702 862
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Miele 51632105USA Fitting Instructions

Miele
Brand
Miele
Model
51632105USA
Type
Fitting Instructions

Miele 51632105USA - The following is a brief overview of the capabilities of your new intelligent washing machine to provide you with ideas on how to get the most out of your purchase:

  • Automatic Load Sizing: This feature detects the weight and size of the laundry load to ensure the precise amount of water and energy is used for the cycle selected, saving money on your utility bills.

  • WI-FI CONNECT: With this feature, you can remotely control your washer from anywhere, at any time, using the Miele app on your mobile phone. You can start, stop, or check the remaining cycle time.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents