Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas
Range Ecoflam on Pass Through
Open Base, 2 Sides
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range Ecoflam on Pass Through
Open Base, 2 Sides
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range
Ecoflam on Pass Through Open Base, 2
Sides
584247 (GC1G21A2BF)S90 4 OPEN GAS BURNERS
(82,000 BTU), ECOFLAM,
PASS THROUGH OPEN
BASE, ISLAND, 2SIDE
OPERATION
Unit to be Electrolux S90 Heavy Duty two 17,000 BTU (5 kW) and two 24,000 BTU (7 kW)
burner gas range on pass through open base with ecoflam. Unit to be installed in central
island type installations with operating from both sides. High efficiency burners with
continuous power regulations to high power of 82,000 BTU’s (24 kW). Thermocouples as
standard on burners for added safety. Body and open base of unit entirely in 304 Stainless
steel. Pan supports in heavy duty cast iron. Unit shall have heavy duty 304 Stainless steel
internal frame with reinforcement on the top of 3 mm.
Extra strength work top in heavy duty 3 mm Stainless steel.
“Lastertec” connection system permits units to be connected to each other creating a
seamless work top.
Main Features
•Unit for island type installation with operations by chef from
both sides (knobs on both sides of the console).
•The two 5 kW and two 7 kW high efficiency burners suit high
performing cooking requirements for the most demanding
customers.
•Model is supplied with Ecoflam pan detection system, which
saves energy and reduces unnecessary heat radiation in the
kitchen.
•Manual gas valves with fixed high and low positions allow
precise control of the flame intensity.
•Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
•Open pass through base compartment for storage of pots,
pans sheet pans etc.
•Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
•“Lasertec connection system” creates seamless work top
when units are connected to each other.
•Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Included Accessories
•4 of Cast-iron pan rest for 3,5-5-7Kw
burner, 430x380mm
PNC 911912
Optional Accessories
•Solid top plate for open burner,
360x360mm
PNC 910718 ❑
•Flexible connection hose 3/4"PNC 910720 ❑
•Pan rest CNS, 430x380mmPNC 910729 ❑
•Shelf fixation for pass-through base and
hot cupboard
PNC 910772 ❑
•Shelf for pass-through open bases and hot
cupboards, W=1000mm, thermaline 900
PNC 910782 ❑
•Side panel, freestanding installations (units
without rear C-board)
PNC 911527 ❑
•Stainless steel front and back kicking
strips, 1000mm
PNC 911533 ❑
•Stainless steel kicking strips, both sides,
left and right
PNC 911638 ❑
•Portioning shelf, 1000mm widthPNC 911856 ❑
•Portioning shelf, 1000mm widthPNC 911878 ❑
•Side panel, freestanding installations (units
without rear C-board)
PNC 911949 ❑