PRECISION DIGITAL PDA6545 User manual

Brand
PRECISION DIGITAL
Model
PDA6545
Type
User manual

PRECISION DIGITAL PDA6545 allows you to mount PDA3400 series and PDA2800 series enclosures to 1.5" or 2" pipes, either horizontally or vertically. All the necessary hardware for mounting is included. The mounting plate is made from 13 gauge steel or stainless steel, and the U-bolts are made from steel. The device is available in both zinc plated steel and 316 stainless steel, making it suitable for a variety of environmental conditions.

PRECISION DIGITAL PDA6545 allows you to mount PDA3400 series and PDA2800 series enclosures to 1.5" or 2" pipes, either horizontally or vertically. All the necessary hardware for mounting is included. The mounting plate is made from 13 gauge steel or stainless steel, and the U-bolts are made from steel. The device is available in both zinc plated steel and 316 stainless steel, making it suitable for a variety of environmental conditions.

PDA6545
2" Pipe Mounting Kit for PDA3400 Series and PDA2800 Series Enclosures
www.predig.com
PRECISION DIGITAL CORPORATION
KEY FEATURES
• Mounts Enclosures to 1.5" or 2" Pipe
• Suitable for Horizontal or Vertical Pipes
• All Necessary Hardware Provided
• Available in Steel and 316 Stainless Steel
OVERVIEW
The PDA6545 and PDA6545-SS provide a convenient way to
mount Precision Digital PDA3400 series and PDA2811, PDA2812,
PDA2414, and PDA2415 enclosures to horizontal or vertical 1.5" or
2" pipes. The mounting kits are available in zinc plated steel and
316 stainless steel and include all necessary hardware to mount
the enclosure to the pipe.
MOUNTING INSTRUCTIONS
1. Attach the mounting plate to the enclosure with the provided
hardware. The holes for the enclosure mounting bolts are
accessed by removing the enclosure lid.
2. Mount the plate to the pipe with the provided U-bolts and
hardware.
Figure 1. Rear View of PDA6545 Pipe Mounting Kit
CONTENTS
• One 13 gauge steel or
stainless steel mounting plate
• Four (each) bolts, washers,
lock washers & nuts to mount
enclosure to plate
• Two U-bolts, and four (each)
washers, lock washers & nuts
to mount plate to pipe
MOUNTING (Rear View)
Figure 2. Hole Location Table & Dimension Drawing: Inches (mm)
MOUNTING HOLES LOCATION
Hole ID Enclosure Type
1 PDA2811, PDA2812, PDA2414, PDA2415
2 PDA3407-PDA3414
2
2
1 1
1 1
9765
22
PRECISION DIGITAL CORPORATION
233 South Street • Hopkinton MA 01748 USA • Tel (800) 343-1001
PDA6545 2" Pipe Mounting Kit
LIM6545_A 06/20
www.predig.com
ORDERING INFORMATION
Model Description Plate Dimensions Inch (mm)
Weight lb (kg)
PDA6545
Steel Pipe Mount Kit for PDA3400 Series and PDA2811,
PDA2812, PDA2814, PDA2815 Enclosures
10.00 x 10.00 X 0.90 (254 X 254 X 23)
2.60 (1.18)
PDA6545-SS
Stainless Steel Pipe Mount Kit for PDA3400 Series and
PDA2811, PDA2812, PDA2814, PDA2815 Enclosures
10.00 x 10.00 X 0.90 (254 X 254 X 23)
2.90 (1.31)
The PDA6545 may be used to mount the following products to 1.5" or 2" pipes:
1. PDA2811, PDA2812, PDA2814, PDA2815 Enclosures
2. PDA3400 Series Enclosures
Figure 3. PDA6845 Mounted to Vertical 2" Pipe
Figure 4. PDA6845 Mounted to Horizontal 2" Pipe
Note: Other products mount in similar fashion.
Pipe
U-BoltU-Bolt
Mounting Plate
Pipe
U-Bolt
U-Bolt
Mounting Plate
2
2
1 1
1 1
9765
22
1
1
1 1
2
2
2
2
3
3
3 3
4 4
44
2000.5
gal
DRAWINGS
Disclaimer
The information contained in this document is subject to change without notice. Precision
Digital Corporation makes no representations or warranties with respect to the contents
hereof, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. See Warranty Information and Terms & Conditions on www.predig.com
for complete details.
© 2020 Precision Digital Corporation. All rights reserved.
WARNING
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
  • Page 1 1
  • Page 2 2

PRECISION DIGITAL PDA6545 User manual

Brand
PRECISION DIGITAL
Model
PDA6545
Type
User manual

PRECISION DIGITAL PDA6545 allows you to mount PDA3400 series and PDA2800 series enclosures to 1.5" or 2" pipes, either horizontally or vertically. All the necessary hardware for mounting is included. The mounting plate is made from 13 gauge steel or stainless steel, and the U-bolts are made from steel. The device is available in both zinc plated steel and 316 stainless steel, making it suitable for a variety of environmental conditions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents