3
4.1 Full charging time: 1 hour
4.2 Pairing: Mobile phone and Monopod
Apple iOS System: open the “Setting” -> Bluetooth-> turn on
monopod-> Searching autodyne system “kjstar”-> enter the system
-> complete Pairing
Android System: open the “Setting” ->B1uetooth->Scanning->turn
on monopod->Searching autodyne system “Kjstar" -> enter the
system"-> complete Pairing
- The pairing of camera and monopod need not password, The
pairing is on-going when the blue led light is flashing quickly,
please operate it within 40 seconds, otherwise, you need to restart
the power, rescan and repair.
4.3. Autodyne put the mobile phone to the monopod -> enter
camera application -> stretch the monopod ->press the key of
“press”
- If the Android system can not work well normally, please
download: kjstar365 Professional Autodyne Software.
5. Caution and safety
5.1 Please read the instruction carefully before usage;
5.2 Please turn off the nearby Bluetooth to avoid the signal
interference;
5.3 It may conflict when using some mobile phone keyboard with
it simultaneously, please close the Bluetooth or turn off the power
of monopod.
5.4 Safety
5.4.1 Please do not dismantle the product;
5.4.2 Please do not use corrosive solvent to clean it;
5.4.3 Forbidden to use it or charging under high temperature
or strong light;
5.4.4 Forbidden to use it in the rain with damp or soaked;