SMC Networks EZ Card SMC1244TX-1 User manual

Brand: SMC Networks

Model: EZ Card SMC1244TX-1

Category: Networking

Type: User manual

This manual is also suitable for

SMC1244TX-1

Copyrights

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no

responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties

which may result from its use. No license is granted by implication or otherwise under any patent or patent

rights of SMC. SMC reserves the right to change specifications at any time without notice.

SMC Networks, Inc.

38 Tesla

Irvine, CA 92618

Trademarks:

SMC is a registered trademark; and EZ Card, is a trademark of SMC Networks, Inc. Other product and

company names are trademarks or registered trademarks of their respective holders.

Contents

Warranty …………………………………………………….………………...... 3

Compliances ……………………………..……………………………………. 5

Hardware Description ................................................................................….. 7

Package Contents ………………………………………………………….… 7

Hardware Installation ……….……………………………………….………. 8

Driver Installation …………………………………………..………………… 9

Windows 9x ………..………….……………………….……………….…… 10

Windows ME ……….……………….……………………………….………. 14

Windows NT ……….………………….…………………………….……….. 16

Windows 2000 ………...…………………….…………………….….……… 17

Windows XP ……………………………………….………..……………….. 19

Driver Verification ……………………..……………………………………. 26

Troubleshooting ……………….……………………………………………. 30

Cable Types and Specifications ……………..…………………………… 32

Technical Specifications ..………………………………………………..… 33

Terminology …….……………………………………………………….…… 34

Limited Warranty

Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in

workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products

carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC

may, at its own discretion, repair or replace any product not operating as warranted with a similar or

functionally equivalent product, during the applicable warranty term. SMC will endeavor to repair or replace

any product returned under warranty within 30 days of receipt of the product.

The standard limited warranty can be upgraded to a Limited Lifetime* warranty by registering new products

within 30 days of purchase from SMC or its Authorized Reseller. Registration can be accomplished via the

enclosed product registration card or online via the SMC web site. Failure to register will not affect the standard

limited warranty. The Limited Lifetime warranty covers a product during the Life of that Product, which is

defined as the period of time during which the product is an ‘Active’ SMC product. A product is considered to

be ‘Active’ while it is listed on the current SMC price list. As new technologies emerge, older technologies

become obsolete and SMC will, at its discretion, replace an older product in its product line with one that

incorporates these newer technologies. At that point, the obsolete product is discontinued and is no longer an

‘Active’ SMC product.

All products that are replaced become the property of SMC. Replacement products may be either new or

reconditioned. Any replaced or repaired product carries either a 30-day limited warranty or the remainder of the

initial warranty, whichever is longer. SMC is not responsible for any custom software or firmware,

configuration information, or memory data of Customer contained in, stored on, or integrated with any products

returned to SMC pursuant to any warranty. Products returned to SMC should have any customer-installed

accessory or add-on components, such as expansion modules, removed prior to returning the product for

replacement. SMC is not responsible for these items if they are returned with the product.

Customers must contact SMC for a Return Material Authorization number prior to returning any product to

SMC. Proof of purchase may be required. Any product returned to SMC without a valid Return Material

Authorization (RMA) number clearly marked on the outside of the package will be returned to customer at

customer’s expense. For warranty claims within North America, please call our toll-free customer support

number at (800) 762-4968. Customers are responsible for all shipping charges from their facility to SMC. SMC

is responsible for return shipping charges from SMC to customer.

Limited Warranty

WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE,

CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN

QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE

AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,

EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING

WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT

ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR

USE OF ITS PRODUCTS. SMC SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING

AND EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR

WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER

INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE

BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER

HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT OR TORT

(INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL,

INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE, LOSS

OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE

SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF

ITS PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE

LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO

THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY

GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. NOTHING IN

THIS WARRANTY SHALL BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS.*

SMC will provide warranty service for one year following discontinuance from the active SMC price list. Under

the limited lifetime warranty, internal and external power supplies, fans, and cables are covered by a standard

one-year warranty from date of purchase.

Compliances

FCC - Class B

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with instructions, may cause harmful interference to radio

communications. However, there is no guarantee that the interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

EC Conformance Declaration - Class B

SMC contact for these products in Europe is:

SMC Networks Europe,

Edificio Conata II,

Calle Fructuós Gelabert 6-8, 2o, 4a,

08970 - Sant Joan Despí, Barcelona, Spain.

This information technology equipment complies with the requirements of the Council Directive

89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic

Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and the

Amendment Directive 93/68/EEC. For the evaluation of the compliance with these Directives, the

following standards were applied:

RFI Emission:

• Limit class B according to EN55022:1998

• Limit class B for harmonic current emission according to EN61000-3-2/1995

• Limitation of voltage fluctuation and flicker in low-voltage supply system according to

EN61000-3-3/1995

Immunity:

• Product family standard according to EN55024:1998

• Electrostatic Discharge according to EN61000-4-2:1995 (Contact Discharge: ±4 kV, Air

Discharge: ±8 kV)

• Radio-frequency electromagnetic field according to EN61000-4-3:1996 (80 - 1000 MHz with

1 kHz AM 80% Modulation: 3 V/m)

• Electrical fast transient/burst according to EN61000-4-4:1995 (AC/DC power supply: ±1 kV,

Data/Signal lines: ±0.5 kV)

• Surge immunity test according to EN61000-4-5:1995 (AC/DC Line to Line: ±1 kV, AC/DC

Line to Earth: ±2 kV)

• Immunity to conducted disturbances, Induced by radio-frequency fields: EN61000-4-6:1996

(0.15 - 80 MHz with 1 kHz AM 80% Modulation: 3 V/m)

• Power frequency magnetic field immunity test according to EN61000-4-8:1993 (1 A/m at

frequency 50 Hz)

• Voltage dips, short interruptions and voltage variations immunity test according to EN61000-

4-11:1994 (>95% Reduction @10 ms, 30% Reduction @500 ms, >95% Reduction @5000

ms)

LVD

• EN60950 (A1/1992; A2/1993; A3/1993; A4/1995; A11/1997)

Warning: Do not plug a phone jack connector in the RJ-45 port. This may damage this device. Les

raccordeurs ne sont pas utilisé pour le systéme téléphonique!

Industry Canada - Class B

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set

out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of

Communications.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de

Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques,” NMB-003 édictée par le

ministère des Communications.

Japan VCCI Class B

Australia AS/NZS 3548 (1995) - Class B

Hardware Description

The SMC1244TX-1 10/100 network card is equipped with:

• 1 RJ-45 connector for 10/100 Mbps connections

• 1 LED Indicator – Link/ACT, FD (Full Duplex)

Package Contents

After unpacking the EZ Card 10/100 SMC1244TX-1, check the contents of the box to be sure you have

received the following components:

• 1 SMC1244TX-1 PCI Card

• 1 Driver and Documentation CD

• 1 Quick Install Guide

Immediately inform your dealer in the event of any incorrect, missing or damaged parts. If possible, please

retain the carton and original packing materials in case there is a need to return the product.

Please register this product and upgrade the product warranty at SMC's Web site: http://www.smc.com

Hardware Installation

Warning:

• Network cards are sensitive to static electricity. To protect the card, avoid touching its

electrical components and always touch the metal chassis of your computer before handling

the card

1. Turn off your computer, unplug the power cord and remove the computer’s cover.

2. Choose a free PCI expansion slot and remove the protective bracket if necessary.

3. Insert the adapter into the slot and make sure it is firmly seated.

4. Secure the adapter bracket into place with the screw.

5. Replace the computer’s cover.

6. Connect the EZ PCI Card 10/100 directly to a 10BASE-T or 100BASE-TX hub or

switch using UTP cable (Category 3, 4 or 5 for 10BASE-T; Category 5 for

100BASE-TX). The maximum allowable length of UTP cable connections is 100

meters (328 ft). When inserting an RJ-45 plug, be sure the tab on the plug clicks into

position to ensure that it is properly seated.

7. Replace the computer’s cover and power it on. The EZ PCI Card 10/100 should be

automatically configured by the host computer’s BIOS. However, if you have an

older computer, you may have to manually configure the computer’s BIOS settings.

See “Troubleshooting”

8. The driver & Documentation that accompanies the EZ Card 10/100 contains all the

network operating system drivers supported by this card. Please read the

“RELEASE.TXT” file on the CD for a list of all drivers. Refer to this guide for

instructions on installing drivers. Any new or updated drivers can be downloaded

from SMC’s Web site (see the back cover of this guide).

9. Connect the EZ PCI Card 10/100 directly to your switch, hub or cable/DSL modem

using UTP cable (Category 3, 4 or 5 for 10BASE-T; Category 5 for 100BASE-TX).

The maximum allowable length of UTP cable connections is 100 meters (328ft).

When inserting an RJ-45 plug, be sure the tab on the plug clicks into position to

ensure that it is properly seated.

Driver Installation

Windows 95/98/Me/NT/2000/XP

NOTE: Installation processes will require the use of your original, licensed copy of Windows. Please have your

Windows CD available BEFORE proceeding with the installation.

Setup Processes

The following are Operating System-specific options that may appear during this

installation procedure:

Windows 95/98: If you are using Windows 95 or 98, you must have your original Windows CD on

hand. The system will request it near the end of the installation process.

Windows Me: The installation process is fully Plug-and-Play. You will be asked to reboot when the

process is complete.

Windows NT: This is NOT a Plug-and-Play operating system. As a result, you need to manually

add the adapter to your network properties. (See below for further details)

Windows 2000/XP: Select [Install the software automatically] if prompted and click [Next] to

complete the installation.

Windows 9x

NOTE: Installation processes will require the use of your original, licensed copy of Windows.

Please have your Windows CD available BEFORE proceeding with the installation.

Step 1: After you have inserted the EZ Card 10/100 SMC1244TX-1 PCI Card in your machine, the

Operating System will automatically recognize the adapter and prompt you for the appropriate

drivers. Click the [Next >] button to begin the installation.

Step 2: Insert the Driver CD and select the [Search for the best driver for your device] option and

click [Next >]. In Windows 95, you may be immediately asked to enter the path of the driver

location. Type ?:\SMC1244\WIN95. (Note: The "?" equals the letter of your CD-ROM drive. In

most cases, this is D.)

Step 3: Clear all checkboxes except for [Specify a location:]. Then press the [Browse] button and

look for the drivers on your CD-ROM. If using Windows 95, browse to ?:\SMC1244\WIN95 and if

you are using Windows 98, browse to ?:\SMC1244\WIN98. (Note: The "?" equals the letter of your

CD-ROM drive. In most cases, this is D.)

Step 4: The system should find the drivers. Click the [Next >] button to continue the installation.

The wizard will show "SMC EZ Card 10/100 (SMC1244TX-1)".

(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display a

list of all the drivers...] option. Select [Network Adapters] from the list of devices, press [Have Disk]

and once again browse to the location of the drivers)

Step 5: Once the system has copied the SMC drivers from the CD, it may then request

files from your original Windows disk. Please insert the Windows CD at this time.

Step 6: The system will copy the files. Do NOT press [Cancel].

Step 7: Once all the necessary files are copied from the Windows CD, the driver install process will

be complete. Click [Finish] to exit the wizard.

Step 8: You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the EZ Card

10/100 SMC1244TX-1 PCI Card will be initialized and ready for use.

Windows Me

NOTE: Installation processes will require the use of your original, licensed copy of Windows.

Please have your Windows CD available BEFORE proceeding with the installation.

Step 1: After you have inserted the SMC1244TX-1 PCI Card in your machine and turned it back on,

the OS will automatically recognize the adapter and prompt you for the appropriate drivers. Select

the [Specify the location of the driver] option. Then click the [Next >] button to begin the

installation.

Step 2: Insert the Driver CD and select the [Specify a location:] option. Clear the [Removable

Media] checkbox. Then press the [Browse] button and look for the drivers on your CD. This should

be located in ?:\SMC1244\WINME. (Note: The ? equals the letter of your CD-ROM drive. In most

cases, this is D.) Then click [Next >].

Step 3: The system should find the drivers. Click the [Next >] button to continue the installation.

(Note: If the system could not find the drivers, click the [< B

ack] button, and select the [Display a

list of all the drivers] option. Select [Network Adapters] from the list of devices, press [Have Disk]

and once again browse to the location of the drivers)

Step 4: Once all the necessary files have been copied, the driver installation is complete. Click

[Finish] to exit the wizard.

Step 5: You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the

SMC1244TX-1 will be initialized and ready for use.

Windows NT

Step 1: NT is not a Plug-and-Play Operating System, thus you need to manually install the drivers.

Right-click on the [Network] icon on the desktop and click [Properties].

Step 2: Go to the [Adapters] tab and click the [Add] button.

Step 3: Click the [Have Disk] button and enter the location of the drivers. This should be

?:\SMC1244\WINNT. (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is

D.) Then click [OK].

Step 4: The system will display the model of your adapter. Click [OK] to continue.

Step 5: You will then be given the option to choose the [Media Type] for the adapter. This is also

commonly known as the Link Speed. We recommend leaving this value at [AutoSense]. This card

will automatically link up to your switch or hub at the highest supported speed. If your switch/hub

does not support auto-negotiation, please select the desired "Media Type". (Note: If you are unsure

of this value, please set it to [AutoSense])

Step 6: The system will commence binding the necessary protocols to the adapter. Click the [Close]

button.

Step 7: You will then be prompted to choose between using DHCP or assigning the card a Static IP

address. If you have a DHCP server on your network or if you plan on implementing this card with a

Cable/DSL modem, please choose the [Obtain an IP address..] option. If you have a Static IP, please

enter them now. Remember to go to the DNS tab and enter your DNS addresses as well. Click [OK]

to continue.

Step 8: You have now completed the driver installation. Click [Yes] to restart and initialize the

adapter.

Windows 2000

Step 1: After you have inserted the SMC1244TX-1 PCI Card in your machine and turned it back on,

the Operating System will automatically recognize the adapter and prompt you for the appropriate

drivers. Click the [N

ext >] button to begin the installation.

Step 2: Insert the Driver CD and select the [Search for a suitable driver...] option. Then click [Next

>].

Step 3: Clear all checkboxes except for [Specify a location]. Then click [Next >].

Step 4: You will then be prompted to enter the location of the drivers. This should be

?\SMC1244\WIN2000. (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is

D.) Then click [OK]. You can also click [Browse] and browse to the location of the drivers on the

CD for further verification.

Step 5: The system should find the drivers. Click the [Next >] button to continue the installation.

(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display a

list of the known drivers...] option. Select [Network Adapters] from the list of devices, press [Have

Disk] and once again browse to the location of the drivers)

Step 6: You have now completed the driver installation. Click [Finish] to initialize the adapter.

Windows XP

Step 1: After you have inserted the SMC1244TX-1 PCI Card in your machine and turned it back on,

the Operating System will automatically recognize and install the adapter using the drivers built-into

Windows XP. If you wish to upgrade to the latest drivers available on the CD-ROM, please continue

and read the directions below.

Step 2: Click [Start] and click [Control Panel]. Then click the [Performance and Maintenance] icon

and select [System]. Click the [Hardware] tab and click [Device Manager]. Then double-click the

ethernet adapter. (Note: If the adapter was not installed properly, you may see "PCI Ethernet

Controller" instead. Double-click on that device.)

Page is loading ...

SMC Networks EZ Card SMC1244TX-1 User manual

Brand: SMC Networks

Model: EZ Card SMC1244TX-1

Category: Networking

Type: User manual

This manual is also suitable for

SMC1244TX-1

Download PDF

report

SMC Networks EZ Card SMC1244TX-1 User manual

This manual is also suitable for

SMC Networks EZ Card SMC1244TX-1 User manual

Related papers

Other documents