Hampton Bay HD-SHUS-020 Operating instructions

Brand
Hampton Bay
Model
HD-SHUS-020
Type
Operating instructions

This manual is also suitable for

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this stackable organizer. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
HD-SHUS-020
1001810443
206955050
207186392
MODEL#
SKU#
OMSID
(WHITE)
OMSID(MOCHA)
41-1/2 IN. STACKABLE 7-SHELF ORGANIZER
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
9 a.m. - 4 p.m. (Central Time), Monday-Friday
1 (855) 439-4663
HAMPTONBAY.COM
Or email us: [email protected]
2
Table of Contents
Table of Contents .......................................................... 2
Safety Information ......................................................... 2
Warranty ......................................................................... 2
One Year Limited Warranty ......................................................2
Pre-installation .............................................................. 3
Planning Installation ................................................................3
Tools Required .........................................................................3
Hardware Included ...................................................................3
Package Contents ....................................................................4
Installation ..................................................................... 5
Care and Cleaning ........................................................ 8
Safety Information
Please carefully read all precautions and instructions in this manual before you begin.
WARNING: This unit contains small parts which could be
a choking hazard for small children. Children should be
under adult supervision at all times or serious injury could
occur.
WARNING: Always unload the unit prior to moving it. The
weight of personal belongings can cause the unit to become
unstable and either tip or collapse. Serious bodily injury
and/or damage to personal belongings may occur.
WARNING: Do not overload the unit. If any shelf, top, or
bottom of the unit bows or bends more than 1/2 in., it is
overloaded. The shelf, top, or bottom could collapse and
cause serious bodily injury and/or damage to personal
belongings.
WARNING: Do not climb or step on the unit. The unit may
become unstable and either tip or collapse. Serious bodily
injury and/or damage to personal belongings may occur.
WARNING: All units must be secured individually to the
wall stud using the L-bracket and wall screw provided. If
the wall stud is not accessible, consult your local hardware
store for the appropriate mounting hardware. Failure to do
so may create an unsafe tipping hazard that could lead to
serious bodily injury and/or damage to personal belongings.
WARNING: Follow the proper safety procedures when
using power tools and ladders.
Warranty
For more detailed information on the product warranty contact the Customer Service Team at 1 (855) 439-4663 or visit
www.Hamptonbay.com.
One Year Limited Warranty
3
Pre-installation
PLANNING INSTALLATION
Compare all parts in the packaging with the Hardware Included and Package Contents sections in this manual. If any part appears missing
or damaged, do not assemble this product. Contact the Customer Service Team.
This product has materials that contain finished and unfinished (raw wood) edges. During Assembly, make sure to note in each diagram
which way the finished edges are facing. In general, all finished edges will face the direction most noticeable after assembly (up and out).
TOOLS REQUIRED
Hammer
Phillips
screwdriver
Drill
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity Part Description Quantity
A
A
Cam Post 8 HH Corner Hole Plug 4
1 tekcarB-L II 8 kcoL maC BB
1 wercS .ni 5.1 JJ 61 liaN CC
1 wercS .ni 5.0 KK 4 tuN mottoB DD
EE Leveling Feet 4 LL Wall Ancho
r
1
2 lewoD MM 02 troppuS flehS FF
2 gulP eloH GG
FINISHED EDGE
TCERROCNITCERROC
UNFINISHED “RAW” EDGE
ALWAYS ALIGN
FINISHED EDGES
AA BB CC
DD
II JJ KK LL
EE
MMGG
FF
HH
HAMPTONBAY.COM
Please contact 1 (855) 439-4663 for further assistance.
4
Pre-installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A
2 lenaP ediS
B Top and Bottom Fixed Shelf 2
5 flehS elbatsujdA C
1 draoB troppuS kcaB D
A
A
B
B
C
C
C
C
C
D
5
Installation
1
Attaching the cam posts to the
s
ide panels
2
Attaching the fixed shelves to the
s
ide panels
Arrange side panels (A) with the finished edges facing
toward the center.
Screw four cam posts (AA) into each of the two side
supports (A), as shown.
With a side support (A) on each side of the top and bottom
fixed shelves (B), slide the attached cam posts (AA) into the
shelves (B).
Insert four cam locks (BB) into the four corners of each
fixed shelf (B), as shown.
Turn the cam locks (BB) 1/4 turn clockwise to lock into
place.
Side Panel
Side Panel
Hole at Bottom
Hole at
Bottom
First Hole at Top
A
A
AA
BB
A
A
B
B
AA
BB
3
2
1
HAMPTONBAY.COM
Please contact 1 (855) 439-4663 for further assistance.
6
Installation (continued)
3
Attaching the back support board
4
Attaching the leveling feet
NOTE: Make sure that the shelving unit is square and
the finished edges are facing away from the back
support board.
Lay the back support board (D) over the back side of the
frame.
Make sure that all of the edges are flush with the sides so
there is no overhang.
Secure the back support board (D) to the assembly using
nails (CC), as shown.
If this will be a bottom shelving unit, install bottom nuts
(DD) and leveling feet (EE) into the bottom of the shelving
unit.
CC
D
DD
EE
7
Installation (continued)
5
Attaching the unit to the wall
6
Inserting the shelf support tabs
Drill a hole for the wall anchor
(
LL) into the wall stud where
the L-bracket (II) will be placed.
Align the center of the wall unit with the wall stud.
Place the short end of the L-bracket (II) against the wall
anchor (LL) into the wall stud.
Use the 1.5 in. screw (JJ) to secure the L-bracket (II) to the
wall stud.
Use the 0.5 in. screw (KK) to secure the L-bracket (II) to the
top fixed shelf (B).
Insert the shelf support tabs (FF) into the holes on the side
panel (A) as desired.
II
JJ
KK
B
LL
FF
A
HAMPTONBAY.COM
Please contact 1 (855) 439-4663 for further assistance.
8
Installation (continued)
7
Inserting the adjustable shelves
8
Inserting the hole plugs or dowels
i
nto the panels
Slide one adjustable shelf (C) over each pair of shelf
support tabs (FF).
If stacking the units, insert the dowels (MM) into the top
holes.
For a single unit, insert the hole plugs (GG and HH) into the
top holes.
Care and Cleaning
To remove the part labels, gently rub a soft cloth moistened with a mild household cleanser over the part label. Then lift a corner of the
label and pull firmly but smoothly until the label comes off.
Dust as needed with a clean, lint-free absorbent cloth.
Spray furniture polish may be used when cleaning.
Scratches and nicks can be touched up with a furniture touch-up stick, shoe polish, or a crayon.
C
C
C
C
C
or
MM
GG
HH
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
9 a.m. - 4 p.m. (Central Time), Monday-Friday
1 (855) 439-4663
HAMPTONBAY.COM
Or email us: [email protected]
Retain this manual for future use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Hampton Bay HD-SHUS-020 Operating instructions

Brand
Hampton Bay
Model
HD-SHUS-020
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents