Silverwood Furniture Reimagined CPLT1873 Installation guide

Type
Installation guide
LT1873_AI-V1
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
• Bulbs get hot quickly! When replacing the bulb, turn off or unplug the lamp and wait until it is cool.
• This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to
reduce the risk of electric shock. This plug will fit in a polarized outlet only one way.
• If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, please contact a
qualified electrician.
• Never use with an extension cord unless the plug can be fully inserted.
• Do not alter the plug.
NOTE: The safety instructions appearing in this manual are not meant to cover all possible conditions
that may occur. It must be understood that common sense, caution, and care must be used with any
electrical products.
** Do not use power tools in assembly.
** Follow the instructions on the warning label
(caution label) inside the lamp shade to ensure
maximum safety.
** Keep all small parts away from children.
** Use only the parts and tools noted in these instructions.
** Failure to follow assembly instructions may void any
applicable warranties.
** CLEANING: Wipe with a soft cloth. NEVER use
harsh chemicals or abrasive cleaners for polishing.
1. Carefully remove all parts from box and remove all
plastic covering from lamp parts.
2. Attach the Harp (C) on the Socket Assembly (A).
3. Place the Shade (D) on the top of the Harp (C) and
tighten it with Finial (E).
4. Screw the Bulb (B) into the Socket Assembly (A).
5. Your lamp is now completely assembled.
6. Please check that all pieces are fully tightened.
DO NOT RETURN THIS ITEM TO THE STORE OR CONTACT THE RETAILER.
Please contact our dedicated customer service team at 1-800-737-5267 or email [email protected] to
request parts or assistance with your merchandise. Oce hours: Monday - Friday from 8:00 AM - 5:00 PM - (Central Time Zone)A
CREAM CERAMIC ETCHED JUG TABLE LAMP
ITEM# CPLT1873
050277006076UPC #
ASSEMBLY INSTRUCTIONS
LED Bulb 10W Maximum
(7W LED included)
Use only with
a self-ballasted
CFL 13W max
bulb
OR OR
Standard
Type A 60W
max bulb
Printed in China
Our products are produced under the strict quality control standards and
meet or exceed all applicable industry standards and consumer regulations.
Your merchandise is warranted for ninety (90) days from the date of
purchase against manufacturing defects.
In the unlikely event you should have a problem with your merchandise,
or you are missing parts, it is not necessary to return the unit to the store
where it was purchased. Please contact customer service at 1-800-737-5267
or [email protected] to request parts or assistance
with assembling your merchandise. Our offices are open Monday thru Friday
between 8:00am and 5:00pm (Central time zone) - excluding major holidays.
Our customer service reps are committed to resolving your problems as
quickly as possible.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
For future reference, please record the model number and UPC barcode
number from the box onto this form in the space below:
MODEL # _________________________________________________________________
UPC BARCODE# __________________________________________________________
IMPORTANT WARRANTY INFORMATION
* SAVE THIS INFORMATION FOR FUTURE REFERENCE *
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Silverwood Furniture Reimagined CPLT1873 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI