Tensor 18584-000 Installation guide

Brand
Tensor
Model
18584-000
Type
Installation guide
1. To reduce the risk of electric shock, this lamp has a
polarized plug (one blade is wider than the other ).
The plug will fit in a polarized outlet only one way. If the
plug does not fit fully into the outlet, reverse the plug.
If plug still does not fit, contact a qualified electrician.
Never use an extension cord unless the plug can be
fully inserted. Do not alter the plug.
2. Do not install non-factory wiring or any other electrical
components. Altering or modifying the lamp in any way
will
render the product unsafe.
3.
Avoid laying objects directly over the power supply cord
to avoid cutting or damaging the wire.
4 Keep curtains, shades, wall hangings and all other fabrics
and objects away from the lamp shade, light switch and
the light bulb. Lamps are not designed to support
additional weight. Do not hang any objects from the
lamp or any lamp part.
5. Place the lamp on a stable, level surface in an area
where the lamp will not be tipped over or bumped.
BULB REPLACEMENT
1. Turn off and unplug the lamp and
allow bulb to cool before
replacing bulb.
2. Gently pull the bulb from the shade assembly until the bulb
becomes loosened from the tension clamp on the shade
assembly.
Unplug the bulb from the pin socket.
3. Reverse this process to install a new bulb.
When the bub is seated properly, you will hear a click.
NOTE: DO NOT PUSH FORCEFULLY ON THE GLASS
TUBES, AS THEY COULD SHATTER AND CAUSE
SERIOUS INJURY.
CLEANING AND MAINTENANCE
1. To clean: use a soft, dry cloth only.
2. Do not use chemical or abrasive cleaning solutions.
Use one 27 Watt, type “FML” bulb.
This lamp is approved for indoor use only.
18584-000
Read and Save:
6.
Flourescent Desk Lamp
IMPORTANT SAFETY INSTRUCTIONS
1. Place lamp base (A) on a stable, flat surface.
2. Insert the polarized plug (B) into an polarized outlet.
3. Adjust gooseneck (C) to desired position.
NOTE: To avoid tipping the lamp over, do not bend the
lamp head completely backwards.
4. Use the HIGH (II)- OFF- LOW (I) switch (D) on lamp
shade to turn lamp on and off.
ASSEMBLY INSTRUCTIONS
A
B
C
D
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3

Tensor 18584-000 Installation guide

Brand
Tensor
Model
18584-000
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents